(DRUGMAXXING) BOTB FULL METH RECIPE STEP BY STEP TUTORIAL [80-90% purity GUARENTEED] (METHCELS GTFIH)

[Yahya]

DISCLAIMER:

THIS IS AN ACTUAL STEP BY STEP TUTORIAL TO MAKE A FULL BATCH OF N-methylamphetamine OF A PURITY OF 80-90%.

This tutorial is provided for educational and informational purposes only. The production of methamphetamine is illegal under many jurisdictions and extremely dangerous. This guide outlines real steps involved in the process, but it is not intended to encourage or promote the illegal production of methamphetamine. Engaging in illegal drug manufacturing can result in severe legal consequences and pose significant health and safety risks. Use this information responsibly and within the bounds of the law.

1) CONTEXT
1.A) INTRODUCTION
Ever wanted to cook up a batch of high-purity meth? Well, you’re in luck little boyo. I’ve got a full, detailed, step-by-step guide right here elaborated with very knowledgeable chemists. Follow these instructions carefully, and you’ll be cooking up some primo stuff in no time as this is a very fast and short method.


1.B) THE IMPORTANCE OF METH.

what's the thing Mike Mentzer and Richard Ramirez have in common ?
They're both moggers and they took a shit a mount of meth in their life.
I won't elaborate further. TAKE METH. IT INCREASES BONE MASS TRUST.



RECIPE: ALL THE LINKS FOR THE PRODUCTS ARE PROVIDED

Ingredients and Dosages:​

1. Pseudoephedrine: 100 grams (approx. 1000 cold pills, each containing 10% pseudoephedrine). LINK HERE
   
2. Hydriodic Acid (HI): 150 ml. LINK HERE
   
3. Red Phosphorus: 50 grams. LINK HERE
   
4. Lithium: Strips from 4 AA lithium batteries. LINK HERE
   
5. Anhydrous Ammonia: 500 ml. LINK HERE
6. Ether: 200 ml. LINK HERE
   
7. Sodium Hydroxide (Lye): 50 grams. LINK HERE
   
8. Hydrochloric Acid (HCl): Concentrated, 150 ml. LINK HERE
   
9. Sodium Metal: 10 grams. LINK HERE
   
10. Distilled Water: 1 liter. LINK HERE
    

Equipment:​

1. Glassware: 500 ml round-bottom flask, beakers, stirring rods. LINK 1 LINK 2 LINK 3
2. Heat Source: Hot plate or Bunsen burner. LINK 1 LINK 2
3. Ventilation: Fume hood or well-ventilated area. LINK HERE
4. Protective Gear: Gloves, goggles, lab coat, gas mask. LINK 1 LINK 2 LINK 3
5. Filtration System: Coffee filters, funnels, vacuum filtration setup. LINK 1 LINK 2 LINK 3
6. Refrigeration Unit: Fridge for cooling and crystallization. Either use fridge at home OR LINK HERE
7. Miscellaneous: Mortar and pestle, syringes, clamps. LINK 1 LINK 2 LINK 3

Procedure:​

1. Extract Pseudoephedrine:​

1. Crushing the Pills:
   • Crush 1000 cold pills containing pseudoephedrine using a mortar and pestle until they are a fine powder.
2. Creating the Slurry:
   • Add the crushed pills to 500 ml of distilled water in a beaker, stirring until a slurry forms.
3. Filtering the Slurry:
   • Use coffee filters to separate the pseudoephedrine from the binder and fillers. Collect the filtered liquid in a clean container.

2. Red Phosphorus and Hydriodic Acid Reaction:​

1. Setting Up the Reaction:
   • In a 500 ml round-bottom flask, combine 100 grams of pseudoephedrine, 50 grams of red phosphorus, and 150 ml of hydriodic acid.
2. Heating the Mixture:
   • Set up the flask on a hot plate. Heat gently at 120°C for 6-8 hours. Use a reflux condenser to keep the reaction under control.
3. Cooling and Filtering:
   • Allow the mixture to cool to room temperature. Filter out the red phosphorus using a coffee filter, collecting the liquid in a clean beaker.

3. Lithium-Ammonia Reduction:​

1. Preparing the Lithium-Ammonia Solution:
   • Strip the lithium from 4 AA batteries and place it in a beaker containing 500 ml of anhydrous ammonia.
   • Add 50 grams of sodium hydroxide to the mixture and stir gently.
2. Adding the Pseudoephedrine Solution:
   • Slowly add the filtered pseudoephedrine-HI mixture to the lithium-ammonia solution. Stir gently, keeping the temperature under 40°C.
3. Stirring and Reaction:
   • Continue to stir the mixture carefully until the reaction completes, forming methamphetamine.

4. Extraction with Ether:​

1. Separating the Layers:
   • Transfer the methamphetamine mixture to a separatory funnel and add 200 ml of ether. Shake the funnel gently and allow the layers to separate.
2. Collecting the Ether Layer:
   • Drain the ether layer containing the methamphetamine into a clean beaker.

5. Conversion to Crystals:​

1. Bubbling HCl Gas:
   • Bubble hydrochloric acid gas into the methamphetamine-ether solution to precipitate methamphetamine hydrochloride crystals. This can be done by carefully adding HCl gas generated from the reaction of hydrochloric acid with sodium metal.
2. Filtering the Crystals:
   • Use coffee filters to collect the crystals. Rinse with acetone to remove impurities.
3. Drying the Crystals:
   • Dry the crystals thoroughly in a vacuum desiccator or under a heat lamp.

6. Recrystallization (Optional):​

1. Dissolving in Acetone:
   • Dissolve the dried methamphetamine hydrochloride crystals in a minimum amount of warm acetone.
2. Cooling and Crystallizing:
   • Allow the solution to cool slowly to room temperature, then place it in the refrigerator to crystallize.
3. Filtering and Drying:
   • Filter the recrystallized methamphetamine hydrochloride crystals and dry them thoroughly.

CONCLUSION )

There you go. You got yourself a good batch of 80-90% purity meth. Either sell it or consume at your own risk.

 

[Yahya]

BUMP

 

[Yahya]

@97baHater @n9wiff @ShawarmaFilth @mogre @Clavicular
GET METHIN BOYS

 

[TechnoBoss]

 

[ShawarmaFilth]

Walter white max

 

[Yahya]

2 minutes into goon sesh

 

[micropp]

Will DEA come after me if I rep this post?

 

[Clavicular]

DISCLAIMER:

THIS IS AN ACTUAL STEP BY STEP TUTORIAL TO MAKE A FULL BATCH OF N-methylamphetamine OF A PURITY OF 80-90%.

This tutorial is provided for educational and informational purposes only. The production of methamphetamine is illegal under many jurisdictions and extremely dangerous. This guide outlines real steps involved in the process, but it is not intended to encourage or promote the illegal production of methamphetamine. Engaging in illegal drug manufacturing can result in severe legal consequences and pose significant health and safety risks. Use this information responsibly and within the bounds of the law.

1) CONTEXT
1.A) INTRODUCTION
Ever wanted to cook up a batch of high-purity meth? Well, you’re in luck little boyo. I’ve got a full, detailed, step-by-step guide right here elaborated with very knowledgeable chemists. Follow these instructions carefully, and you’ll be cooking up some primo stuff in no time as this is a very fast and short method.


1.B) THE IMPORTANCE OF METH.
View attachment 3000237
View attachment 3000240
what's the thing Mike Mentzer and Richard Ramirez have in common ?
They're both moggers and they took a shit a mount of meth in their life.
I won't elaborate further. TAKE METH. IT INCREASES BONE MASS TRUST.



RECIPE: ALL THE LINKS FOR THE PRODUCTS ARE PROVIDED

Ingredients and Dosages:​

1. Pseudoephedrine: 100 grams (approx. 1000 cold pills, each containing 10% pseudoephedrine). LINK HERE View attachment 3000260
2. Hydriodic Acid (HI): 150 ml. LINK HERE View attachment 3000264
3. Red Phosphorus: 50 grams. LINK HERE View attachment 3000265
4. Lithium: Strips from 4 AA lithium batteries. LINK HERE View attachment 3000267
5. Anhydrous Ammonia: 500 ml. LINK HERE View attachment 3000268
6. Ether: 200 ml. LINK HERE View attachment 3000270
7. Sodium Hydroxide (Lye): 50 grams. LINK HERE View attachment 3000271
8. Hydrochloric Acid (HCl): Concentrated, 150 ml. LINK HERE View attachment 3000272
9. Sodium Metal: 10 grams. LINK HERE View attachment 3000274
10. Distilled Water: 1 liter. LINK HERE View attachment 3000276

Equipment:​

1. Glassware: 500 ml round-bottom flask, beakers, stirring rods. LINK 1 LINK 2 LINK 3
2. Heat Source: Hot plate or Bunsen burner. LINK 1 LINK 2
3. Ventilation: Fume hood or well-ventilated area. LINK HERE
4. Protective Gear: Gloves, goggles, lab coat, gas mask. LINK 1 LINK 2 LINK 3
5. Filtration System: Coffee filters, funnels, vacuum filtration setup. LINK 1 LINK 2 LINK 3
6. Refrigeration Unit: Fridge for cooling and crystallization. Either use fridge at home OR LINK HERE
7. Miscellaneous: Mortar and pestle, syringes, clamps. LINK 1 LINK 2 LINK 3

Procedure:​

1. Extract Pseudoephedrine:​

1. Crushing the Pills:
   • Crush 1000 cold pills containing pseudoephedrine using a mortar and pestle until they are a fine powder.
2. Creating the Slurry:
   • Add the crushed pills to 500 ml of distilled water in a beaker, stirring until a slurry forms.
3. Filtering the Slurry:
   • Use coffee filters to separate the pseudoephedrine from the binder and fillers. Collect the filtered liquid in a clean container.

2. Red Phosphorus and Hydriodic Acid Reaction:​

1. Setting Up the Reaction:
   • In a 500 ml round-bottom flask, combine 100 grams of pseudoephedrine, 50 grams of red phosphorus, and 150 ml of hydriodic acid.
2. Heating the Mixture:
   • Set up the flask on a hot plate. Heat gently at 120°C for 6-8 hours. Use a reflux condenser to keep the reaction under control.
3. Cooling and Filtering:
   • Allow the mixture to cool to room temperature. Filter out the red phosphorus using a coffee filter, collecting the liquid in a clean beaker.

3. Lithium-Ammonia Reduction:​

1. Preparing the Lithium-Ammonia Solution:
   • Strip the lithium from 4 AA batteries and place it in a beaker containing 500 ml of anhydrous ammonia.
   • Add 50 grams of sodium hydroxide to the mixture and stir gently.
2. Adding the Pseudoephedrine Solution:
   • Slowly add the filtered pseudoephedrine-HI mixture to the lithium-ammonia solution. Stir gently, keeping the temperature under 40°C.
3. Stirring and Reaction:
   • Continue to stir the mixture carefully until the reaction completes, forming methamphetamine.

4. Extraction with Ether:​

1. Separating the Layers:
   • Transfer the methamphetamine mixture to a separatory funnel and add 200 ml of ether. Shake the funnel gently and allow the layers to separate.
2. Collecting the Ether Layer:
   • Drain the ether layer containing the methamphetamine into a clean beaker.

5. Conversion to Crystals:​

1. Bubbling HCl Gas:
   • Bubble hydrochloric acid gas into the methamphetamine-ether solution to precipitate methamphetamine hydrochloride crystals. This can be done by carefully adding HCl gas generated from the reaction of hydrochloric acid with sodium metal.
2. Filtering the Crystals:
   • Use coffee filters to collect the crystals. Rinse with acetone to remove impurities.
3. Drying the Crystals:
   • Dry the crystals thoroughly in a vacuum desiccator or under a heat lamp.

6. Recrystallization (Optional):​

1. Dissolving in Acetone:
   • Dissolve the dried methamphetamine hydrochloride crystals in a minimum amount of warm acetone.
2. Cooling and Crystallizing:
   • Allow the solution to cool slowly to room temperature, then place it in the refrigerator to crystallize.
3. Filtering and Drying:
   • Filter the recrystallized methamphetamine hydrochloride crystals and dry them thoroughly.

CONCLUSION )

There you go. You got yourself a good batch of 80-90% purity meth. Either sell it or consume at your own risk.

I love psl so much man already archived this thread so the bluepill mods dont delete

 

[Yahya]

Will DEA come after me if I rep this post?

I'm not even gonna troll you or anything.
They might actually.
I know I post a lot of banter on this platform but considering how much feds love to lurk here they probably will chase you
BUT you already commented here so you're already on a watchlist LOL
might as well give it a rep to show support i'll make a cocaine thread next after my vacation in bolivia