Quickie: DIY Mse and Veneers + face puller!

[Pay]

Buy a dental moulding kit, then use caulk and the appropriate Dental thingie, you just need to achieve whats presented in the picture.

After that hire a 3d scanner from the web. Every country should have their own variant of this.
Load the file into a 3d editor, and reverse the thingie, add sheet to your teeth model,
Hire/send file to a 3d printing plant, make sure to have the correct plastic
Google: "Dental safe 3d plastic" and use that.

For mse you can send the stl file to https://www.greatlakesdentaltech.com/
Choose what mse thingie you want. Optionally if you want to make it really cheap learn how to weld it to your plastic veneers, alas they will do it all for you.

Tutorial on dental impression:


How to make diy veneers? Just watch tutorials lil bro, eventually you can curate your own dental plan through the 3d program.

https://www.iflscience.com/this-guy...-printing-his-own-plastic-braces-for-60-41613
full tutorial on plastic braces for 60 bucks.

You can also just 3d print the inverted scanned model, Then use hot plastic press to press onto it, then cut excess plastic, and model your way that way, which is probably the correct way to go

NOW ON WE HEAD TO FACE PULLER....
for old cels, heres a study proving maxillary progression or wtf its called can still be achieved in adults (NON TOOTH BORNE!!!!)
I used to have og study but heres an autistic easy scammy guide

Adult Maxillary Protraction : A case study - Face Pulling - Improve your facial appearance with mewing and orthodontic headgear.

www.facepulling.com

Anyways face pullers are available in the original great lakes thingie link.

 

[vincentzygo]

orthos finna start sniping u niggas

 

[Pay]

orthos finna start sniping u niggas

No plenty of retarded people to keep the money churning forever.

 

[Pay]

BTW WHEN U BUY MSE AT ORTHO CLINIC THEY CHARGE U 10K TO INSERT 6 NEEDLES COUPLE CM INTO YOUR SKULL JFL
STUDIES EVEN SUGGEST MANUAL SCREWING IS PEAK (AKA THE SHITTY SCREWER FOR 100 BUCKS NOT 10000000 BUCKS MEDICAL APPLIANCE)
FUCK THESE JEWS!

 

[Pay]

btw 3d scanner = laser scanner

 

[ikramy]

Thread 'MSE is a looksmin. Thumbpulling doesn't work.'
https://looksmax.org/threads/mse-is-a-looksmin-thumbpulling-doesnt-work.1512424/

 

[Pay]

Thread 'MSE is a looksmin. Thumbpulling doesn't work.'
https://looksmax.org/threads/mse-is-a-looksmin-thumbpulling-doesnt-work.1512424/

Nose becoming wider, is bs, cause if you have a non wide maxilla, then your nose is technically narrow.

This guide doesnt force you to take the mse route, they have tooth retainers that work for hooking a face puller aswell, and face puller isnt a cope appliance no matter how you spin it.

 

[ikramy]

Nose becoming wider, is bs, cause if you have a non wide maxilla, then your nose is technically narrow.

This guide doesnt force you to take the mse route, they have tooth retainers that work for hooking a face puller aswell, and face puller isnt a cope appliance no matter how you spin it.

@Jonasㅤㅤ what do you think?

 

[Pay]

@Jonasㅤㅤ what do you think?

if you do have a well developed maxilla and so fourth, then this guide isnt for you.
the same way youd get rejected at a clinic.

 

[Pay]

@Jonasㅤㅤ what do you think?

Veneers aswell have shitty progress for dental plans, so this guide is personally focused on face pulling appliances.

 

[ikramy]

if you do have a well developed maxilla and so fourth, then this guide isnt for you.
the same way youd get rejected at a clinic.

I have a very slight recession

 

[ynns]

do you get better forward maxillary gains from the face puller if you do mse with it?

 

[Pay]

do you get better forward maxillary gains from the face puller if you do mse with it?

whaddya think fukk

 

[ynns]

whaddya think fukk

I dont know. thats why im asking. im talking specefically forward maxilaary gain from the reverse puller. i tohught it would maybe give more gains if sutures are spread by mse. im not a fucking ortho nor do i know shit.

 

[Pay]

I dont know. thats why im asking. im talking specefically forward maxilaary gain from the reverse puller. i tohught it would maybe give more gains if sutures are spread by mse. im not a fucking ortho nor do i know shit.

Google my fucking nigger,
google suture skulls, and youll see what i mean

 

[ynns]

I have slight recession. my maxilla is decently wide but its back. so good front bad side. feels unsavable honestly.

 

[Pay]

I have slight recession. my maxilla is decently wide but its back. so good front bad side. feels unsavable honestly.

I dont care honestly

 

[ynns]

I dont care honestly

fuck you

 

[Pay]

fuck you

Listen to phreshboyswag

 

[FutureSlayer]

Yeah okay but how are you going to install the veneers, prep your teeth, cure your bite alignment and such? It’s impossible

 

[Pay]

Yeah okay but how are you going to install the veneers, prep your teeth, cure your bite alignment and such? It’s impossible

Fuk u mean install the veneers??

 

[ynns]

Listen to phreshboyswag

this some trash underground nigga?

 

[FutureSlayer]

Fuk u mean install the veneers??

they need to be glued upon your shaven tooth in a very particular way

 

[Pay]

they need to be glued upon your shaven tooth in a very particular way

??? Jfl, no

 

[Pay]

they need to be glued upon your shaven tooth in a very particular way

???

this some trash underground nigga?

Hes the goat

 

[FutureSlayer]

??? Jfl, no

jfl my ass, they do, it’s not composite

 

[ynns]

???

Hes the goat

niggas tryna be the next 2hollis

 

[bottleofwater]

Shit i might do this

I have a narrow palate but dentists refused to give me a palte expander

 

[bottleofwater]

Shit i might do this

I have a narrow palate but dentists refused to give me a palte expander

 

[bottleofwater]

Shit i might do this

I have a narrow palate but dentists refused to give me a palte expander

Double post due to bad internet mb

 

[bottleofwater]

Buy a dental moulding kit, then use caulk and the appropriate Dental thingie, you just need to achieve whats presented in the picture.

After that hire a 3d scanner from the web. Every country should have their own variant of this.
Load the file into a 3d editor, and reverse the thingie, add sheet to your teeth model,
Hire/send file to a 3d printing plant, make sure to have the correct plastic
Google: "Dental safe 3d plastic" and use that.

For mse you can send the stl file to https://www.greatlakesdentaltech.com/
Choose what mse thingie you want. Optionally if you want to make it really cheap learn how to weld it to your plastic veneers, alas they will do it all for you.

Tutorial on dental impression:


How to make diy veneers? Just watch tutorials lil bro, eventually you can curate your own dental plan through the 3d program.

https://www.iflscience.com/this-guy...-printing-his-own-plastic-braces-for-60-41613
full tutorial on plastic braces for 60 bucks.

You can also just 3d print the inverted scanned model, Then use hot plastic press to press onto it, then cut excess plastic, and model your way that way, which is probably the correct way to go

NOW ON WE HEAD TO FACE PULLER....
for old cels, heres a study proving maxillary progression or wtf its called can still be achieved in adults (NON TOOTH BORNE!!!!)
I used to have og study but heres an autistic easy scammy guide

Adult Maxillary Protraction : A case study - Face Pulling - Improve your facial appearance with mewing and orthodontic headgear.

www.facepulling.com

Anyways face pullers are available in the original great lakes thingie link.

Can you do at home MARPE next?

It can be really useful for poor americacels who need it but cant afford it from the ortho, i also need it.

Rag me if you ever do it in the thread pls bhai

 

[Pay]

Can you do at home MARPE next?

It can be really useful for poor americacels who need it but cant afford it from the ortho, i also need it.

Rag me if you ever do it in the thread pls bhai

Fuck you mean stupid ass nigger.
Marpe is on there aswell in the links

 

[bottleofwater]

Fuck you mean stupid ass nigger.
Marpe is on there aswell in the links

shit i didnt read all of it

 

[repulse]

Eliminating competition

 

[bottleofwater]

Eliminating competition

nope

 

[bottleofwater]

Ill try this since dentists have refused to guve me palate expander even though my palates narrow

 

[ceasar3x]

this some trash underground nigga?

rope

 

[CD34]

@FutureSlayer what do u think

 

[FutureSlayer]

@FutureSlayer what do u think

answered up there. Retarded idea

 

[CD34]

answered up there. Retarded idea

This retard thinks you can glue them onto your tooth

 

[FutureSlayer]

This retard thinks you can glue them onto your tooth

sure like an halloween plastic canine

 

[ynns]

rope

 

[Pay]

This retard thinks you can glue them onto your tooth

you can indeed, but thats some retarded american invention Just so you dont have braces or some retarded cope bs

 

[Pay]

they need to be glued upon your shaven tooth in a very particular way

i didnt mean veneers you absolute fucking imbecile nigger,

i meant invisalign, pretty fucking obvious by the entire thread you daft nigger boy

 

[Pay]

sure like an halloween plastic canine

jfl im too retarded, i didnt mean veneers i meant invisalign.

would be funny as fuck if you glued diy veneers and shaved your teeth infront of the mirror

 

[FutureSlayer]

jfl im too retarded, i didnt mean veneers i meant invisalign.

would be funny as fuck if you glued diy veneers and shaved your teeth infront of the mirror

Yes, invisalign is feasible then lmao