What is the ideal length for the mandible?

Deleted member 3202

Deleted member 3202

Motivatemaxxing
Joined
Sep 17, 2019
Posts
4,812
Reputation
4,340
I've noticed that there isn't a thread for this, I wonder why. Is it because it depends upon how the rest of your face looks in comparison with your mandible? If that isn't the case, then can somebody tell me the ideal length of the mandible (as the title says)?
 
  • +1
Reactions: Deleted member 3043
Depends on your skull shape and zygos
 
  • +1
Reactions: Hekt0r, Zoneator, Dicklet.4.3 and 3 others
9.3786937589193547899 cm
 
  • +1
Reactions: 5'8manlet, PubertyMaxxer, Deleted member 3043 and 1 other person
One last question, how do you measure it?
Measure from gonion to the middle of the chin. Ideally the mandible should be 75% of erect dick length.
 
  • JFL
  • +1
Reactions: Hades, 5'8manlet, Catawampus and 3 others
Last edited:
  • Love it
Reactions: Bewusst
Mine is 13.5 cm tbh
 
  • +1
Reactions: Deleted member 3202
mandible length should be irrelevant, since almost every well-developed man will have a long, straight mandible.

ramus height should be talked more often cause it's harder to change and provides many aesthetic benefits
 
Redpill: the ramus length is actually more important than the mandible length
 
  • +1
Reactions: SayNoToRotting
mandible length should be irrelevant, since almost every well-developed man will have a long, straight mandible.

ramus height should be talked more often cause it's harder to change and provides many aesthetic benefits
Well I have an uncle who has a very wide jaw and long ramus but has a weird short mandible.
Redpill: the ramus length is actually more important than the mandible length
How do you measure ramus length?
 
mandible length should be irrelevant, since almost every well-developed man will have a long, straight mandible.

ramus height should be talked more often cause it's harder to change and provides many aesthetic benefits

If your mandible is very close of "straight" so the Ramus will obviously have a good "height".

You can have a big chin even with short ramus, but you can't have a straight mandible without a tall or normal ramus by any means.
 
  • +1
Reactions: Deleted member 3202
If your mandible is very close of "straight" so the Ramus will obviously have a good "height".

You can have a big chin even with short ramus, but you can't have a straight mandible without a tall or normal ramus by any means.
I have a straight mandible, so that means I have a good ramus!
 
I have a straight mandible, so that means I have a good ramus!

Maybe, if is not short so yes, the Ramus is part of mandible, if your mandible is not literally like of a mouthbreather with a fucked shape so yes, just see

345tgf
 
  • +1
Reactions: Deleted member 3202
Maybe, if is not short so yes, the Ramus is part of mandible, if your mandible is not literally like of a mouthbreather with a fucked shape so yes, just see

View attachment 155989
Would 11.5 cm be too short in length for the mandible?
 
  • +1
Reactions: Deleted member 3202
  • +1
Reactions: Deleted member 2227
  • +1
Reactions: Deleted member 3202
Your chin is recessed?
Recessed in height, it's short, 1.8 inches when I clench and when I have my mouth in resting position it's 2.0
 
  • +1
Reactions: Deleted member 2227
I don't think you can measure the mandible with common tools.

After all the gonion is rounded, where do you put the line?
 
I don't think you can measure the mandible with common tools.

After all the gonion is rounded, where do you put the line?
What do you mean put the line?
 
Sorry if this sounds stupid but what line between the gonion and the mandible?
That's what I am asking you.

Don't you get it at all? My point?
 
https://www.daviddarling.info/images/mandible.jpg



Here.

Please, I invite everyone to visualize me via paint what they think between which ponts one is supposed to measure the mandible, and even more importantly- how to do it precisely with home made tools.
Same goes for ramus.










Cliffs: You can't, the seperation between mandible and ramus is exactly in the middle of the rounded gonion:

https://teachmeanatomy.info/wp-content/uploads/Bony-Landmarks-of-the-Mandible-Ramus-Body-Angle.jpg
 
  • +1
Reactions: Deleted member 3202 and Deleted member 2227
If your mandible is very close of "straight" so the Ramus will obviously have a good "height".

You can have a big chin even with short ramus, but you can't have a straight mandible without a tall or normal ramus by any means.
true on the chin, not true at all on the 2nd?

Jordan Barrett? his ramus is short yet he has a very straight, decently long mandible?
 
true on the chin, not true at all on the 2nd?

Jordan Barrett? his ramus is short yet he has a very straight, decently long mandible?

Jordan Barrett? depend on the photo, if you want to show me, i think, in this photo is not really short

2F4AD99E00000578 3356866 image m 67 1449878129875
 
Redpill: the ramus length is actually more important than the mandible length



I would say their both coequal i have a morph showing how angle plus length is sometimes better than a longer ramus their both co equal


MhNyutR



As we can see angle plus mandible length matters a lot
 
I would say their both coequal i have a morph showing how angle plus length is sometimes better than a longer ramus their both co equal


View attachment 156632


As we can see angle plus mandible length matters a lot
How long do you think the mandible would be in this example?
 
How long do you think the mandible would be in this example?



Guesstimates 10 inches inches but not much length was added mm differences were on the actual mandible what created a better looking affect was the skull over all took a ante face
 
Guesstimates 10 inches inches but not much length was added mm differences were on the actual mandible what created a better looking affect was the skull over all took a ante face
Keep asking everyone this but is 5 inches for mandible length good? This one has been worrying me lol.
 
9.3786937589193547899 cm



Wasn't it 18 cm ?
I've noticed that there isn't a thread for this, I wonder why. Is it because it depends upon how the rest of your face looks in comparison with your mandible? If that isn't the case, then can somebody tell me the ideal length of the mandible (as the title says)?



Bruhhhhhh this shit has me worried as well tbqh i only got like 8 cm to 9 cm but that's with a ruler.

I would need a cephalic chart to know for sure.

All i can for sure is the extreme surgeries combined could graft us 1.299 inches for maxilla and mandible that's a lot of inches to play with but for us to become chad i need 2.5 inches extra off mandible length and you require 1 inch i think.


The issue here is really quite simple surgery can't get get us that 1/2.5 extra inches required for chad hood the only way after that is implants.

This is true if the ruler statement is correct if it's not then life-fuel for us i have given my reasons below.


However measuring with a ruler doesn't seem very accurate a it has many margin of error like the angle it's measured from fat around cheeks and other stuff similar to that.


And i think were relatively on the average scale if we would measure with a Cephalogram lets hope though once we measure with a cephalogram we have normie jaws.


If not extreme options are always their.


Literally most if not all surgeons are blue pilled rats that can honestly suck my dick the only surgeons who would even dare try is andrewschev and dr sailor the rest are blue pilled fuck wads.
 
Last edited:
  • +1
Reactions: Deleted member 3202
Wasn't it 18 cm ?




Bruhhhhhh this shit has me worried as well tbqh i only got like 8 cm to 9 cm but that's with a ruler.

I would need a cephalic chart to know for sure.

All i can for sure is the extreme surgeries combined could graft us 1.299 inches for maxilla and mandible that's a lot of inches to play with but for us to become chad i need 2.5 inches extra off mandible length and you require 1 inch i think.


The issue here is really quite simple surgery can't get get us that 1/2.5 extra inches required for chad hood the only way after that is implants.

This is true if the ruler statement is correct if it's not then life-fuel for us i have given my reasons below. Mine is 22.4cms it seems.


However measuring with a ruler doesn't seem very accurate a it has many margin of error like the angle it's measured from fat around cheeks and other stuff similar to that.


And i think were relatively on the average scale if we would measure with a Cephalogram lets hope though once we measure with a cephalogram we have normie jaws.


If not extreme options are always their.


Literally most if not all surgeons are blue pilled rats that can honestly suck my dick the only surgeons who would even dare try is andrewschev and dr sailor the rest are blue pilled fuck wads.
Try measuring the circumference of your mandible (i.e., gonion to gonion), yours looked average to me last time I saw a pic of you.
Mine is 22.4cms (I think).
 
Try measuring the circumference of your mandible (i.e., gonion to gonion), yours looked average to me last time I saw a pic of you.



I did that a couple of time I got like 11 to 12 cm that's still worrying. And then sometimes 7 to 10 it's mainly dependent on the angle I've found out.


My only cope left is a ceplogram tbqh.
 
  • +1
Reactions: Deleted member 3202
I did that a couple of time I got like 11 to 12 cm that's still worrying. And then sometimes 7 to 10 it's mainly dependent on the angle I've found out.


My only cope left is a ceplogram tbqh.
I hope ours isn't short, I'd rather have a slightly recessed maxilla rather than a short jaw.
 
I hope ours isn't short, I'd rather have a slightly recessed maxilla rather than a short jaw.



Same jaw I found out is literally 90 percent of aesthetics
 
  • +1
Reactions: Deleted member 3202
Same jaw I found out is literally 90 percent of aesthetics
Do you at least have good facial width? Mine is like Jeremy Meeks wide except I lack his angular jaw.
 
Do you at least have good facial width? Mine is like Jeremy Meeks wide except I lack his angular jaw.



I don't know i would need to measure with a ceplogram it's really easy to fuck with as well
 
Look at my avatar.
 
I don't know i would need to measure with a ceplogram it's really easy to fuck with as well
if your face is narrow you could get MSE + facepuller + MSDO and then get something for your lower jaw.
 
Look at my avatar.
your mandible nearly popped out of your skull your jutting so hard lmao
also you are breaking your neck tf are u bragging about jfl
 
  • JFL
Reactions: Deleted member 3202
if your face is narrow you could get MSE + facepuller + MSDO and then get something for your lower jaw.



Honestly atleast their is a lot of stuff that can be done laterally however anteriorly their is very little
 
  • +1
Reactions: Deleted member 3202
Honestly atleast their is a lot of stuff that can be done laterally however anteriorly their is very little
Is your ramus above or below your lips? I have no idea what they mean by that, I've heard it mentioned in the "Jeremy Meeks Pheno" thread.
 
Is your ramus above or below your lips? I have no idea what they mean by that, I've heard it mentioned in the "Jeremy Meeks Pheno" thread.



Nearly but not fully i think it's like 2/4mm
 
  • +1
Reactions: Deleted member 3202

Similar threads

iblamementalhealth
Replies
9
Views
185
MagicalWaves
M
bradchadpitt
Replies
44
Views
567
OldBones
O
aryan mogger
Replies
24
Views
300
Gaygymmaxx
Gaygymmaxx

Users who are viewing this thread

Back
Top