Dimorphism Features and Proportions-evaluating masculine aesthetics

[dawooddX]

A Guide to Facial Dimorphism for Men​

Dimorphism refers to the degree of masculine characteristics and proportional ratios within a male face. It is strongly correlated with a striking appearance and sexual appeal, making it a critical category in male facial aesthetics.

This short guide will cover key, often overlooked aspects of dimorphism to help you evaluate your own features more deeply. We will break it down into two main sections:

1. Features: The individual masculine traits and structure.
2. Proportions: The harmony between different parts of your face.

1. FEATURES​

This section covers the physical traits that contribute to a dimorphic appearance.

The Most Important Features​

1. Nose Projection
An underrated but major factor. A dimorphic nose requires:

• Proportionate Height & Projection: The nose should have ideal height to projection.
• High Nasal Bridge: The bridge should be high and tall, not low or flat.
• Straight Shape: The nose shape should be straight, not drooping downward. A downward-tilting tip and a lower/flat nose bridge can create a "softer" look and is a significant limitation for dimorphism.
• Note: This is somewhat more forgiving and dependent on ethnicity.

2. Zygomatic (Zygos) Mass
This is one of the most critical features. Good zygos aren't just about mass, but also correct placement.

• Thick Arch: The zygomatic arch must be thick and visible from the side profile.
• Forward Projection: The zygos must project forward, not just outward.
• Lateral Flare: The zygos should have lateral mass and also flare
• Achieving both mass and correct placement creates the "true ogre curve," a highly sexually dimorphic feature. Zygos are also crucial because they influence the appearance of your eyes, canthal tilt, and overall skull width.

3. Temple Projection
Another underrated feature that can drastically change your face.

• The temple region should be extended and well-developed, not narrow or recessed.
• It provides a foundation for the frontal bone, orbitals, and browridge.
• it must have Ideal width and projection contributing significantly to overall facial balance and mass.

4. Jaw Mass (self explanatory)
Perhaps the most important feature for male aesthetics.

• The jaw should have substantial mandible bulk, achieved through ideal gonion eversion/mass and masseter growth.
• It should be the tallest and largest part of the face.
• A dimorphic jaw is robust and angular, with good proportions in the frontal view, gonial angle, bigonial width, and ramus length etc.

General Features​

• Neck Width: The ideal neck width should be 90-100% of your bigonial (jaw) width.
  

• Buccal Fat: This is the fat pad in the midface. Lower buccal fat contributes to a striking, masculine look, while higher levels create a softer, more neotenous appearance.
• 
  
  
  
  Lips: Lips should have full, defined volume, wide length, and a clear Cupid's bow. They should not be thin, large, or have a downward shape.
• 
  
• 

• Forehead: A masculine, straight hairline (not rounded) with proportionate forehead length and width is essential. An unbalanced forehead is a major detriment to dimorphism
  
  
• .
  
  
  
  
  
  
• Eyebrows: Eyebrows should be dense, tall (height from top to bottom), and low-set relative to the eyes. Their length should match the forehead width and be longer than the width of the eyes
• 
  
• .
  
  
  
  
  
  
• Chin: The chin should be tall and wide, creating a square shape that complements a strong jawline.

​

​

2. FRONTAL PROPORTIONS (Dimorphic Harmony To Watch Out For)

-​

• Neck to Jaw Ratio: 90-100% (Neck Width : Bigonial Width)
• Jaw Frontal Angle: 84.6° - 95°
• Midface ratio: 0.95-1.01
• Jaw to Cheekbone Ratio: 86% - 92% (Bigonial Width : Bizygomatic Width)
• FWHR (Facial Width to Height Ratio): 1.85 - 1.9
• TFWHR (Total Facial Width to Height Ratio): 1.33 - 1.38
• Canthal Tilt: Positive tilt between 5.2° - 5.8°
• Lower Third Proportion: 30.6% - 35% of total facial height
• Chin to Philtrum Ratio: 2.05 - 2.55
• Facial Thirds Harmony: Each vertical third of the face (forehead, midface, lower jaw) should be balanced, ideally between 31.5% - 34.5% of the total height.
• Eye Aspect Ratio: 2.8 - 3.6 (ik this doesnt cover fully of it but its js a short guide)
  
  
  
  

All in all, facial depth and craniofacial development is the number one factor that ties into dimorphism. There are also other foundational elements to consider, such as overall skull height and width, but that is a topic for another thread after more research.

 

[dawooddX]

A Guide to Facial Dimorphism for Men​

View attachment 4344576View attachment 4344577
Dimorphism refers to the degree of masculine characteristics and proportional ratios within a male face. It is strongly correlated with a striking appearance and sexual appeal, making it a critical category in male facial aesthetics.

This short guide will cover key, often overlooked aspects of dimorphism to help you evaluate your own features more deeply. We will break it down into two main sections:

1. Features: The individual masculine traits and structure.
2. Proportions: The harmony between different parts of your face.

View attachment 4344578

1. FEATURES​

This section covers the physical traits that contribute to a dimorphic appearance.

The Most Important Features​

1. Nose Projection
An underrated but major factor. A dimorphic nose requires:

View attachment 4344511View attachment 4344512

• Proportionate Height & Projection: The nose should have ideal height to projection.
• High Nasal Bridge: The bridge should be high and tall, not low or flat.
• Straight Shape: The nose shape should be straight, not drooping downward. A downward-tilting tip and a lower/flat nose bridge can create a "softer" look and is a significant limitation for dimorphism.
• Note: This is somewhat more forgiving and dependent on ethnicity.

2. Zygomatic (Zygos) Mass
This is one of the most critical features. Good zygos aren't just about mass, but also correct placement.

View attachment 4344519View attachment 4344520

• Thick Arch: The zygomatic arch must be thick and visible from the side profile.
• Forward Projection: The zygos must project forward, not just outward.
• Lateral Flare: The zygos should have lateral mass and also flare
• Achieving both mass and correct placement creates the "true ogre curve," a highly sexually dimorphic feature. Zygos are also crucial because they influence the appearance of your eyes, canthal tilt, and overall skull width.

3. Temple Projection
Another underrated feature that can drastically change your face.
View attachment 4344532

• The temple region should be extended and well-developed, not narrow or recessed.
• It provides a foundation for the frontal bone, orbitals, and browridge.
• it must have Ideal width and projection contributing significantly to overall facial balance and mass.

4. Jaw Mass (self explanatory)
Perhaps the most important feature for male aesthetics.

View attachment 4344538

• The jaw should have substantial mandible bulk, achieved through ideal gonion eversion/mass and masseter growth.
• It should be the tallest and largest part of the face.
• A dimorphic jaw is robust and angular, with good proportions in the frontal view, gonial angle, bigonial width, and ramus length etc.

General Features​

• Neck Width: The ideal neck width should be 90-100% of your bigonial (jaw) width.View attachment 4344545

• Buccal Fat: This is the fat pad in the midface. Lower buccal fat contributes to a striking, masculine look, while higher levels create a softer, more neotenous appearance.
• View attachment 4344546
  
  
  Lips: Lips should have full, defined volume, wide length, and a clear Cupid's bow. They should not be thin, large, or have a downward shape.
• 
  
• View attachment 4344547

• Forehead: A masculine, straight hairline (not rounded) with proportionate forehead length and width is essential. An unbalanced forehead is a major detriment to dimorphism
  
  
• .View attachment 4344548View attachment 4344549
  
  
  
• Eyebrows: Eyebrows should be dense, tall (height from top to bottom), and low-set relative to the eyes. Their length should match the forehead width and be longer than the width of the eyes
• 
  
• .View attachment 4344555
  
  
  
  
• Chin: The chin should be tall and wide, creating a square shape that complements a strong jawline.

View attachment 4344557

​

​

2. FRONTAL PROPORTIONS (Dimorphic Harmony To Watch Out For)​

​

-​

• Neck to Jaw Ratio: 90-100% (Neck Width : Bigonial Width)
• Jaw Frontal Angle: 84.6° - 95°
• Midface ratio: 0.95-1.01
• Jaw to Cheekbone Ratio: 86% - 92% (Bigonial Width : Bizygomatic Width)
• FWHR (Facial Width to Height Ratio): 1.85 - 1.9
• TFWHR (Total Facial Width to Height Ratio): 1.33 - 1.38
• Canthal Tilt: Positive tilt between 5.2° - 5.8°
• Lower Third Proportion: 30.6% - 35% of total facial height
• Chin to Philtrum Ratio: 2.05 - 2.55
• Facial Thirds Harmony: Each vertical third of the face (forehead, midface, lower jaw) should be balanced, ideally between 31.5% - 34.5% of the total height.
• Eye Aspect Ratio: 2.8 - 3.6 (ik this doesnt cover fully of it but its js a short guide)
  
  
  

All in all, facial depth and craniofacial development is the number one factor that ties into dimorphism. There are also other foundational elements to consider, such as overall skull height and width, but that is a topic for another thread after more research.


View attachment 4344603

@powerliftercoco

 

[sherry12]

Good thread