Don't want to do under eye filler? TRY PCL SCREW THREADS

[Sayori]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis and blindness.

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

 

[Sayori]

INB4 dnr

 

[Starborn]

INB4 dnr

 

[norwoodingmanlet]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

HYMENNN

 

[Sayori]

View attachment 4993820

This nga @Master has the most aura in the forum

 

[Navity]

decent thread

 

[BigBallsLarry]

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @

@TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

 

[Vrowding]

hi nigga

 

[Don_and-idk]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

very good thread hopefuel for infracels

 

[StyIix]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

Good guide

 

[Sayori]

hi nigga

Hallo lil nga

decent thread

 

[Navity]

Hallo lil nga

INB4 Mod abuse sticky

 

[Sayori]

INB4 Mod abuse sticky

I can't stick in here, I am off topic mod

 

[goku21]

 

[Psocho]

what is the cost PCL vs PDO?

in my looksmax plan im doing PDO over the summer

has no idea PCL existed

 

[Sayori]

Bump:
mod chans slide a nga a sticky
@DildoFaggins @Randomized @Gengar’s Ghost @tuberculosisinmybal @Hernan

What im doing by tagging 5 mods:

 

[Sayori]

what is the cost PCL vs PDO?

in my looksmax plan im doing PDO over the summer

has no idea PCL existed

Pcl's do cost more however that are way more effective, stronger, and last longer

Look at the price for 20 screws:

Also great question

 

[DildoFaggins]

Bump:
mod chans slide a nga a sticky
@DildoFaggins @Randomized @Gengar’s Ghost @tuberculosisinmybal @Hernan

What im doing by tagging 5 mods:

mirin high effort thread, I'm also bound to offtopic unfortunately

 

[Hernan]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

Excellent thread but nigga really mainstreaming PCL now hmmm.

 

[Orka // Tilikum]

PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis.

You should probably also mention blindness here since we're dealing with the infraorbital artery

Are you making this thread because you finally opted out of diy undereye filler?

 

[Orka // Tilikum]

Excellent thread but nigga really mainstreaming PCL now hmmm.

been mainstream bucko

 

[Orka // Tilikum]

what is the cost PCL vs PDO?

in my looksmax plan im doing PDO over the summer

has no idea PCL existed

50 body count talking about pcl vs pdo

shut up chad

 

[Jason Voorhees]

Great thread. How hard or easy is it to find a practitioner who is willing to do this or has experience doing it? This is the first time I'm hearing about it so I don't imagine it to be a widely available procedure

 

[bddcoper]

i want to try around my zygos once i see what i look like off PEDs since threads generally create scar tissue so it should mimic the hypothetical effects of bonesmashing at least temporarily

 

[bddcoper]

what is the cost PCL vs PDO?

in my looksmax plan im doing PDO over the summer

has no idea PCL existed

PDO is bad because we dont know if it causes fat loss (it could some studies have shown it does on like pig skin or some shit but idk if they have any with actual humans)

PCL doesnt have that risk and it lasts longer i believe

 

[TGUN.]

Looks way to scary

 

[Sayori]

You should probably also mention blindness here since we're dealing with the infraorbital artery

Are you making this thread because you finally opted out of diy undereye filler?

I am gate keeping filler that's why I didn't post my under eye ha filler guide

How would one go blind form a PCL thread? They don't cause vascular occlusions or anything that can really mess with blood supply ?

 

[Sayori]

Excellent thread but nigga really mainstreaming PCL now hmmm.

Like orka said that are already main stream, they arent that good as compared to ha filler

PCL threads are only for people who don't want to risk a VA

 

[Jason Voorhees]

If you don't mind me can I slide in your dms for 2-3 questions. I won't waste your time too much I promise.

 

[Orka // Tilikum]

How would one go blind form a PCL thread? They don't cause vascular occlusions or anything that can really mess with blood supply ?

You mentioned it's safer than filler because filler can lead to necrosis

But in this specific area there's more than that to worry about

You won't go blind with pcl

 

[Orka // Tilikum]

If you don't mind me can I slide in your dms for 2-3 questions. I won't waste your time too much I promise.

@Sayori $300/hour

this guy's rich

(I'm joking jackson)

 

[Sayori]

If you don't mind me can I slide in your dms for 2-3 questions. I won't waste your time too much I promise.

Boyo, ur always welcome no need to ask just pm me

 

[Jason Voorhees]

You mentioned it's safer than filler because filler can lead to necrosis

But in this specific area there's more than that to worry about

You won't go blind with pcl

Tbh i never knew pcl was main stream. I've seen plenty of clinics offer pdo threads but pcl is new

 

[Sayori]

You mentioned it's safer than filler because filler can lead to necrosis

But in this specific area there's more than that to worry about

You won't go blind with pcl

Oh ur talking about ha filler leading to blindness, yeah that's right let me add that in boyo

 

[bddcoper]

Looks way to scary

looks scarier than it rlly is i have put it in my lips before

it doesnt really last tbh i think PDO lasted like 1 month in my lips for the lift and PCL like 3 months

 

[Psocho]

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

50 body count talking about pcl vs pdo

shut up chad

PDO is bad because we dont know if it causes fat loss (it could some studies have shown it does on like pig skin or some shit but idk if they have any with actual humans)

PCL doesnt have that risk and it lasts longer i believe

Theoretically,

you could DIY this: Put this on your zygos

it could lift your entire midface

giving you that snatched look

if that could work that would be insane DIY

 

[Sayori]

Theoretically,

you could DIY this: Put this on your zygos

it could lift your entire midface

giving you that snatched look

if that could work that would be insane DIY

View attachment 4993990

Not theory its already done but its only for pussies, just use ha filler boyo its better

 

[Sayori]

looks scarier than it rlly is i have put it in my lips before

it doesnt really last tbh i think PDO lasted like 1 month in my lips for the lift and PCL like 3 months

Mobile area, the pdo prob ripped lol

 

[Psocho]

just use ha filler boyo its better

it would be more practical to use COG threads

it would be just to lift
Not to had unnecessary volume.

 

[Sayori]

it would be more practical to use COG threads

it would be just to lift
Not to had unnecessary volume.

Or you can give urself a mini face lift with pcl and use filler for ur bones

 

[bddcoper]

Theoretically,

you could DIY this: Put this on your zygos

it could lift your entire midface

giving you that snatched look

if that could work that would be insane DIY

View attachment 4993990

It was discussed on here before but the thread isn’t titled properly so I forgot where it is but it was orc’s idea I believe

But it’s near the top of my list for the fall

 

[Psocho]

It was discussed on here before but the thread isn’t titled properly so I forgot where it is but it was orc’s idea I believe

But it’s near the top of my list for the fall

if you and @Sayori find it one day it would be lovely if you sent it to me

 

[laflmkid]

omg another diy thread

imma have to order a 10kg bottle of lidocaine at this rate

 

[zygocell]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis and blindness.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

peak thread for infracels. Bookmarked

 

[Oryza]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis and blindness.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

Sh anyone wanna try first before I do it

 

[Oryza]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis and blindness.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

Do you have any sterilizers at home? Or just isopropyl alcohol works

Sh anyone wanna try first before I do it

also how do you guys sterilize it at home, do you buy devices to do it like UV light or simply use something like isopropyl alcohol

 

[Sayori]

Do you have any sterilizers at home? Or just isopropyl alcohol works

also how do you guys sterilize it at home, do you buy devices to do it like UV light or simply use something like isopropyl alcohol

The alcohol pads work

 

[Oryza]

The alcohol pads work

ok thanks

 

[tripletungsahur67]

Another beautiful thread by Sayori. These PCL threads are almost as beautiful as this thread.

 

[tripletungsahur67]

Sayori is truly the goat.