
loyolaxavvierretard
𝕯𝖝𝕯 𝖈𝖗𝖊𝖜 . Alonso
- Joined
- Mar 1, 2025
- Posts
- 14,703
- Reputation
- 34,494
DISCLAIMER
THIS REFERENCE DOES NOT PROMOTE ANY ILLEGAL ACTIVITES OR THE MAKING OR BUYING OF ILLEGAL SUBSTANCES AND COMPOUNDS. IT ALSO DOES NOT PROMOTE THE USAGE OF SUCH COMPOUNDS. IT IS MERELY MEANT TO BE A REFERENCE FOR UNDERSTANDING THE PROCESS BEHIND HOW PEOPLE BREW SUCH SUBSTANCES BY THEMSELVES. I DO NOT TAKE ANY RESPONSIBILITY FOR ANY HARM LEGAL, MONETARY OR HEALTH RELATED CAUSED BY FOLLOWING THIS REFERENCE.
BEFORE YAPPING ABOUT WHY I WROTE THIS, READ THE LAST SECTION. IF YOU STILL DONT LIKE IT THAT'S FINE, THIS IS MEANT FOR THE 0.001% USER WHO IS ANNOYED OF BUYING TEST C DUE TO THE PRICE, RELIABILITY OF THE SELLER OR THE QUALITY OF THE PRODUCT
INGREDIENTS AND TOOLS REQUIRED
THIS REFERENCE DOES NOT PROMOTE ANY ILLEGAL ACTIVITES OR THE MAKING OR BUYING OF ILLEGAL SUBSTANCES AND COMPOUNDS. IT ALSO DOES NOT PROMOTE THE USAGE OF SUCH COMPOUNDS. IT IS MERELY MEANT TO BE A REFERENCE FOR UNDERSTANDING THE PROCESS BEHIND HOW PEOPLE BREW SUCH SUBSTANCES BY THEMSELVES. I DO NOT TAKE ANY RESPONSIBILITY FOR ANY HARM LEGAL, MONETARY OR HEALTH RELATED CAUSED BY FOLLOWING THIS REFERENCE.
BEFORE YAPPING ABOUT WHY I WROTE THIS, READ THE LAST SECTION. IF YOU STILL DONT LIKE IT THAT'S FINE, THIS IS MEANT FOR THE 0.001% USER WHO IS ANNOYED OF BUYING TEST C DUE TO THE PRICE, RELIABILITY OF THE SELLER OR THE QUALITY OF THE PRODUCT
INGREDIENTS AND TOOLS REQUIRED
- 10 grams of testosterone cypionate powder
- Benzyl Alcohol 2ml 5% BA
- 30.5 ml sesame oil
- Syringes 3cc and 5/10cc
- 20 gauge needles
- Vial
- Sterile Vial
- Whatman Syringe Filter 0.22 micrometer pore size PTFE
- Rubber Stopper
- Digital Milligram Scale
- Nitrile Gloves
- Isopropyl Alcohol for sterilisation of surfaces
3cc
5cc
20 gauge needles
Vial
Whatman Filter
Nitrile Gloves

5cc

20 gauge needles

Vial

Whatman Filter

Nitrile Gloves

STEPS
1. Weigh out 10 grams of Testosterone Cypionate powder on a digital milligram scale with a precision of 1 mg. It is available for 20$ I guess if you try to search for it second hand or on a discount (dunno if discounts exist for that). Use a weigh boat and press the tare to calibrate the scale. Then scoop out the powder using a spatula or whatever you are comfy with and place it onto the scale on the weigh boat. Remember to not do it where there is air flow eg. fans, windy breeze from outside, near the windows, you breathing over it.
2. Place the powder that you just weighed into the vial.
3. Add 2ml of BA into the vial
4. In this step you want to heat the carrier oil (sesame oil) in an oven to atleast 100 degrees (212F). I would recommend heating to 115 just to be sure, since sometimes it doesnt dissolve the powder well. Use a small glass utensil and cover it with a foil to ensure that pressure escapes but not the dust. Bake at 100 degrees for atleast 20 minutes. A suggestion of mine is to heat more oil than the amount recommended by me since you likely wont be able to utilise all the heated oil so for this. Another option is to use a muffin pan with an indentation so that you can measure the volume of oil you are pouring into to pan if you cant measure it any other way
5. Add the oil to the vial after you have heated it, but make sure to save 2ml of the oil in the syringe for the vial. Gently shake the vial after this for atleast 5 minutes to make sure that oil dissolves the powder. Dont shake vigorously otherwise air bubbles will be introduced into the vial which makes for painful injections. If the mixture is cloudy or not homogenous shake it for 2-3 minutes more but not more than that.
6. Now if the mixture is still cloudy, try heating it in a warm water bath in a range of 50-60 degrees (122-140F). DONT LET IT GO OVER 70 DEGREES. You'll ruin it. You can use other tools too for this if you want it
7. Now you want to be real careful here. Dont use unsterile hands, or make the syringes or the filter touch unsterile surfaces. Wear gloves. You will attach a needle to one of te syringes. Ensure that the syringe is empty. Now insert the syringe into the vial containing the solution (powder/oil) and slowly pull back the plunger. If you pull the plunger too fast you can enjoy the painful injections.
8. Now remove the needle from the syringe. Attach the Whatman filter to the syringe and it should probably snap into place to make an airtight seal. Ensure a proper fit before proceeding else the solution will leak. Now you want to pick up the other sterile vial for this step. I would suggest you have a rubber stop over the vial. Kinda like this

So now you want to insert the syringe (with the Whatman filter) into the rubber stopper and aim this part of the filter

Into this part of the rubber stopper

Now you want to push off the needle to one side of the stopper. Also insert another sterile needle into the rubber stopper for pressure relief. The 20 gauge needles are fine to use. This is mandatory for preventing backflow.
9. Now draw out the solution into the sterile vial by pushing the plunger. You should apply some pressure on the second needle while drawing out the solution.
10. Once you have emptied the syringe containing solution into the vial, its time to attach the filter into the syringe containing the 2ml oil (remember step 5). Attach the Whatman filter and draw out the oil into the solution using the same procedure as step 8-9. Dont remove the Whatman filter from the rubber stopper, attach the syringe onto it.
11. After you are done, remove the filter and seal the vial completely. Dont vigorously shake after the vial is sealed, just a little swirl and twirl of the vial is enough
VOILA YOU HAVE CONVERTED 10 GRAMS OF RAW TEST C POWDER INTO 40ml @ 250mg/ml solution.
QUESTIONS
> Why should I follow this if I can buy test cyp ?
ANS = The number one factor is that the costs are lower than UGL. All the tools I listed are not very expensive unlike UGL compounds from reputable sellers. If you have access to a reputable seller that can sell test cypionate you can link it here. The raw powder you buy will most likely from India or China (90% China), so you can estimate how low the costs are. Other ingredients and tools are cheap and found easily in the market so no headache there. If I compare the cheapest UGL I find that a 10 ml vial would cost around 50-60$. Comparing to a 10ml pack from deus-power (37 dollars) to a homebrew (15.22$/60.89$ for 40ml). Basically you are trading cost for effort and once you become confident in making this shit the main thing becomes on how to find reputed sellers or where to find tools. Infact you could find even cheaper test C for 20 dollars but fif you inject 2ml/week (cruise) over the course of a year you are saving about 226.512$. Most roiders go above 500mg/ml though so you save even more. It's kinda like Linux vs Windows. You pay for the Windows activation key but there is no effort, while you get Linux for free but you have to put in effort to get it running
> Can I start this ?
ANS = If you are prepared to accept that you'll fuck up a few times then yeah. Technically, there is no one stopping you but I would recommend brewing Test E if you want an easier time. Since there are a plethora more recipes of test E as compared to test C I decided to write this otherwise I would have spent even more time than I did writing this.
> How to handle the syringes and filter safely ?
ANS = Wipe all your workdesk with isopropyl alcohol. Wear nitrile gloves while handling stuff if you can. Clean gloves are fine too if they are new. Wear a hair net if you shed a lot and a mask too if you have it. Open the syringe from the plunger side. Dont touch the surfaces while twisting the needle into the syringe. DONT TOUCH THE INNER BARREL OF THE SYRINGE.
> How to reduce pain during injections ?
ANS = You can use other carrier oils, but the heating temperature will differ likely. For eg. If you use MCT oil the oil will heat up very quickly and you should only heat upto 82 degrees only or even lesser. The rest depends on how you inject and brewing technique. Dont try to take shortcuts or be lethargic, you will be the only one who suffers
Tags = @Jonas2k7 @chadisbeingmade roast the shit out of this