Daddy Dick
Live Laugh Love
- Joined
- Feb 12, 2026
- Posts
- 5,399
- Reputation
- 8,035
Supplies - Raw Tren-A powder, Beakers, Hotplate, MCT Oil, BB
TRENBOLONE ACETATE
Trenbolone Acetate, Recipe: Add about 25ml bb and 25ml oil and heat and mix at about 250 for a few minutes and let it cool. Re filter and bottle. That will give you 100mg/ml and hold at just under 18% bb and 1.3% ba. it's 150mg/ml as it stands right now. if 150mg/ml was for some reason just absolutely necessary what I would do is add the 25ml bb, 20ml MCT and 7.5 grams of powder. That will hold, but there may he some pip. Warm the tren as brewing. Keep it warm as would while filtering. not hot. I can pick the beaker with warm product up with my hands and it will feel nicely warm, not hot. being warm help dissolve the powder and helps filter much easier and will not damage the product
TRENBOLONE, CRASHED
Probably water or crashed. You can try placing in the oven at about 250 degrees and see if it clears up. I would. Water has to go somewhere, if it is moisture. Wouldn't hurt.
Brewing/Brewing Heat
HEATING, HOT PLATE, DAMAGING POWDERS: You can use a thermometer. you could affect it, but we're talking somewhere above 600f. I've been doing this for quite a while so it's kind of like muscle memory to me. I set my hot plate at a certain temp and do everything by touch and sight. I doubt my oil reaches over the desired 250f that I set as standard. When the beaker is on the hot plate you can see the oil slightly swirl around. Basically mixing itself. I then turn off the hot plate and allow the beaker to remain on the heated plate and allow it to slowly reduce its temp. While the oil is still very warm then filter making it easier for your product to move through the filter. I avoid water baths. Water and oil don't mix. There's absolutely no reason in the world to use a water bath. As far as heating, there's no reason you can't warm it. I wouldn't heat it very hot, but 200 degrees ain't gonna hurt the hormone. Appr 250f will not degrade your product and will make things much easier and faster. Keep it pretty warm while filtering. Heat makes it all so much faster and easier. There's really no down side to using heat unless you go really high temps and then the product starts to degrade. But we're talking temps of over 5 - 6 hundred degrees f. If you heat at temps of about 250f your powder will dissolve in minutes and you can see the oil swirling around a bit mixing and dissolving product. Let it warm to a temp where you can comfortably hold the beaker and feel it's warmth and filter at that temp for a much easier filtering process. First off, when you heated the shit out of the one batch and got the black residue at the bottom you probably burnt some of your raws. Remember, when your raws aren't completely dissolved that means you still have powder in the mix and can be burnt. Some will say no heat, but just warm it. You should be able to comfortably pick up the beaker and it feel just a little bit warm. As for the sludge. Shit, I don't know. Water would give a look like that but not really be sludgy. You can try filtering it, putting it back in the beaker and baking it for about 30 to 45 minutes on about 300 to 350f. Not optimal, but you may salvage your product with minor degradation. Oh, and then filter again before bottling in vials.
TRENBOLONE ACETATE
Trenbolone Acetate, Recipe: Add about 25ml bb and 25ml oil and heat and mix at about 250 for a few minutes and let it cool. Re filter and bottle. That will give you 100mg/ml and hold at just under 18% bb and 1.3% ba. it's 150mg/ml as it stands right now. if 150mg/ml was for some reason just absolutely necessary what I would do is add the 25ml bb, 20ml MCT and 7.5 grams of powder. That will hold, but there may he some pip. Warm the tren as brewing. Keep it warm as would while filtering. not hot. I can pick the beaker with warm product up with my hands and it will feel nicely warm, not hot. being warm help dissolve the powder and helps filter much easier and will not damage the product
TRENBOLONE, CRASHED
Probably water or crashed. You can try placing in the oven at about 250 degrees and see if it clears up. I would. Water has to go somewhere, if it is moisture. Wouldn't hurt.
Brewing/Brewing Heat
HEATING, HOT PLATE, DAMAGING POWDERS: You can use a thermometer. you could affect it, but we're talking somewhere above 600f. I've been doing this for quite a while so it's kind of like muscle memory to me. I set my hot plate at a certain temp and do everything by touch and sight. I doubt my oil reaches over the desired 250f that I set as standard. When the beaker is on the hot plate you can see the oil slightly swirl around. Basically mixing itself. I then turn off the hot plate and allow the beaker to remain on the heated plate and allow it to slowly reduce its temp. While the oil is still very warm then filter making it easier for your product to move through the filter. I avoid water baths. Water and oil don't mix. There's absolutely no reason in the world to use a water bath. As far as heating, there's no reason you can't warm it. I wouldn't heat it very hot, but 200 degrees ain't gonna hurt the hormone. Appr 250f will not degrade your product and will make things much easier and faster. Keep it pretty warm while filtering. Heat makes it all so much faster and easier. There's really no down side to using heat unless you go really high temps and then the product starts to degrade. But we're talking temps of over 5 - 6 hundred degrees f. If you heat at temps of about 250f your powder will dissolve in minutes and you can see the oil swirling around a bit mixing and dissolving product. Let it warm to a temp where you can comfortably hold the beaker and feel it's warmth and filter at that temp for a much easier filtering process. First off, when you heated the shit out of the one batch and got the black residue at the bottom you probably burnt some of your raws. Remember, when your raws aren't completely dissolved that means you still have powder in the mix and can be burnt. Some will say no heat, but just warm it. You should be able to comfortably pick up the beaker and it feel just a little bit warm. As for the sludge. Shit, I don't know. Water would give a look like that but not really be sludgy. You can try filtering it, putting it back in the beaker and baking it for about 30 to 45 minutes on about 300 to 350f. Not optimal, but you may salvage your product with minor degradation. Oh, and then filter again before bottling in vials.
Made a doc myself has other recipes for other roids I dont remember if i wrote this all myself or gathered info here is a brewing supplies list i found
Equipment Link List
Benzyl Alcohol
Benzyl Benzoate
MCT Oil
Glass Rods
Scale
Mixer Hotplate
Beakers
Magnetic Stirrer Bar
Vacuum Pump
Obviously need syringes, syringe filters, and sterile 10ml vials
Sold on amazon
Equipment Link List
Benzyl Alcohol
Benzyl Benzoate
MCT Oil
Glass Rods
Scale
Mixer Hotplate
Beakers
Magnetic Stirrer Bar
Vacuum Pump
Obviously need syringes, syringe filters, and sterile 10ml vials
Sold on amazon
