How to pin steroids CORRECTLY

ropemaxxxx

ropemaxxxx

Gold
Joined
Nov 8, 2024
Posts
834
Reputation
467
To start things off, I have seen a shit ton of posts on here about the use of anabolic steroids, but all they ever mention is doses, compounds etc. Never the small details that either make or break the experience (pinning).

There is a whole lot more to think about than just sticking a needle into your arse.

SYRINGES

Alright so first off your gonna need a good syringe, one that matches the amount you will be injecting.

There are syringes from 0,5 ml to 50 ml (your most likely never gonna need anything bigger than a 2 ml, if even that)

The standard for anabolic compounds is a 1 ml syringe, if the amount your going to be injecting is over that, just pin more than once for god sakes. Otherwise it will increase risk of pain and complications. But we will get into that later.

NEEDLES

Your going to need 2 different needles for each injection, a drawing needle and an injection needle (don’t be stupid and use only the injection needle because it WILL get dull from drawing and hurt significantly more)

For a drawing needle I would recommend anything between a 18-21 gauge needle. If the steroid your using has a higher concentration (for an example 400 mg/ml test) use an 18 gauge as the liquid will be a lot thicker. Length does not really matter but it should be around 1-1,5 inches.

For a injection needle I would recommend anything between a 23-27 gauge needle, the higher the gauge the less painful it will be, but it will take a lot longer to inject. We will cover the optimal length of the injection needle later, since it is relative to your injection site.

Picking a injection site

There are many different sites you can choose to inject in, some more painful than others. My list will be for people who are injecting themselves (assuming you guys don’t have any friends 💔)

🥇 Ventrogluteal site

Minor amount of blood vessels/nerves
Easy to reach
Can hold large amounts of liquid (up to 3ml)

This is overall my favorite one, little to no pain and you can do it easily by yourself.

For this site you should be using ATLEAST a 1,5 inch needle as you most likely have high fat storage here.

🥈Vastus lateralis

Easy to reach
Can hold a large amounts of liquid (up to 3 ml)
Safe from larger blood vessels/nerves

This site is pretty comparable to the ventrogluteal site, but I would say it is more painful.
Average adult should use a 1 inch needle, if your fat use a 1,5 inch needle.

🥉Deltoid

This is the classic injection site, most people use it for the simplicity.

Easy to do yourself
Good for smaller injections (can only hold up to 1 ml)

It is a very easy to pick spot, but I would not recommend it since it is very painful, there are nerves and it can only hold a smaller amount of liquid.

1 Inch needle is recommended.

General tips

Use gloves
Use an alcohol swab before and after injecting
Use the Z-track method
Inject slowly
1 ml a time is the least painful
Rotate between injection sites (dont use the same spot over and over again)

And that is about it, if you found this helpful please give me a thumbs up 🥹 my rep is actually shit.
 
  • +1
  • JFL
Reactions: KeepCopingLads, Iraniancel, KaisenMaxxer and 17 others
good thread ngl
 
  • +1
Reactions: Toggle9877
  • +1
Reactions: Bitterschön, ss07 and inversions
Can yall roidcels gtfih 💔
 
  • +1
Reactions: Bitterschön
To start things off, I have seen a shit ton of posts on here about the use of anabolic steroids, but all they ever mention is doses, compounds etc. Never the small details that either make or break the experience (pinning).

There is a whole lot more to think about than just sticking a needle into your arse.

SYRINGES

Alright so first off your gonna need a good syringe, one that matches the amount you will be injecting.

There are syringes from 0,5 ml to 50 ml (your most likely never gonna need anything bigger than a 2 ml, if even that)

The standard for anabolic compounds is a 1 ml syringe, if the amount your going to be injecting is over that, just pin more than once for god sakes. Otherwise it will increase risk of pain and complications. But we will get into that later.

NEEDLES

Your going to need 2 different needles for each injection, a drawing needle and an injection needle (don’t be stupid and use only the injection needle because it WILL get dull from drawing and hurt significantly more)

For a drawing needle I would recommend anything between a 18-21 gauge needle. If the steroid your using has a higher concentration (for an example 400 mg/ml test) use an 18 gauge as the liquid will be a lot thicker. Length does not really matter but it should be around 1-1,5 inches.

For a injection needle I would recommend anything between a 23-27 gauge needle, the higher the gauge the less painful it will be, but it will take a lot longer to inject. We will cover the optimal length of the injection needle later, since it is relative to your injection site.

Picking a injection site

There are many different sites you can choose to inject in, some more painful than others. My list will be for people who are injecting themselves (assuming you guys don’t have any friends 💔)

🥇 Ventrogluteal site

Minor amount of blood vessels/nerves
Easy to reach
Can hold large amounts of liquid (up to 3ml)

This is overall my favorite one, little to no pain and you can do it easily by yourself.

For this site you should be using ATLEAST a 1,5 inch needle as you most likely have high fat storage here.

🥈Vastus lateralis

Easy to reach
Can hold a large amounts of liquid (up to 3 ml)
Safe from larger blood vessels/nerves

This site is pretty comparable to the ventrogluteal site, but I would say it is more painful.
Average adult should use a 1 inch needle, if your fat use a 1,5 inch needle.

🥉Deltoid

This is the classic injection site, most people use it for the simplicity.

Easy to do yourself
Good for smaller injections (can only hold up to 1 ml)

It is a very easy to pick spot, but I would not recommend it since it is very painful, there are nerves and it can only hold a smaller amount of liquid.

1 Inch needle is recommended.

General tips

Use gloves
Use an alcohol swab before and after injecting
Use the Z-track method
Inject slowly
1 ml a time is the least painful
Rotate between injection sites (dont use the same spot over and over again)

And that is about it, if you found this helpful please give me a thumbs up 🥹 my rep is actually shit.
bump
 
i’d like to add to this for certain compounds, atleast test, you don’t necessarily need that long of a needle when pinning the glutes, fat absorption and intra muscular has shown to be about the same. if you can’t process the oils and are getting lumps/ injecting too frequenelty or too many ML, then yes it would be a better option
 
i’d like to add to this for certain compounds, atleast test, you don’t necessarily need that long of a needle when pinning the glutes, fat absorption and intra muscular has shown to be about the same. if you can’t process the oils and are getting lumps/ injecting too frequenelty or too many ML, then yes it would be a better option
Yeah I heard something about injecting test in the SubQ, but I dont really know much about it therefore I just recommended the classics for intramuscular injections.
 
  • +1
Reactions: Bitterschön
Missed one of the most important things: aspirate the needle to make sure you are not in a VEIN or you will have fun with oil embolism.
 
  • +1
Reactions: Bitterschön
Missed one of the most important things: aspirate the needle to make sure you are not in a VEIN or you will have fun with oil embolism.
Not always necessary, rather low chances of complications and it hurts 💔
 
  • +1
Reactions: Bitterschön
Not always necessary, rather low chances of complications and it hurts 💔

I don’t like to aspirate because it hurts. :lul:

I know the chance is low but I’ve been pinning for more than seven years now and it’s a lot of rolls of the dice.

And I’ve never found it to hurt actually, that’s strange.
 
  • +1
Reactions: Bitterschön
Missed one of the most important things: aspirate the needle to make sure you are not in a VEIN or you will have fun with oil embolism.
i never aspirated, even while injecting tren
never got tren cough
 
I don’t like to aspirate because it hurts. :lul:

I know the chance is low but I’ve been pinning for more than seven years now and it’s a lot of rolls of the dice.

And I’ve never found it to hurt actually, that’s strange.
The pain is probably in my head, but the sites I listed are all safe away from major blood vessels. I mean sure, if you want that extra safety, you can go ahead but in my eyes it is not really worth it.
 
  • +1
Reactions: Bitterschön
The pain is probably in my head, but the sites I listed are all safe away from major blood vessels. I mean sure, if you want that extra safety, you can go ahead but in my eyes it is not really worth it.

Unsure if there is a minimum size of blood vessel to cause issues but I have certainly seen significant leaks of venous blood after needle withdrawal which mean a vein of some size was punctured as the needle passed through it. Although I have never actually aspirated blood so far. The probability of actually ending up with the tip in a vein is extremely low.
 
  • +1
Reactions: Bitterschön
Unsure if there is a minimum size of blood vessel to cause issues but I have certainly seen significant leaks of venous blood after needle withdrawal which mean a vein of some size was punctured as the needle passed through it. Although I have never actually aspirated blood so far. The probability of actually ending up with the tip in a vein is extremely low.
Do you use ztrack?
 
  • +1
Reactions: Bitterschön
Repped + bookmarked. Will need this in 2 weeks when I start roiding
 
  • Love it
  • +1
Reactions: bruhtoobrutal and ropemaxxxx
Was thinking 250mg weekly for now and see how it goes. Whats your recommendation?
I would say 500 mg, the difference between 250 and 500 in terms of benefits are huge, while it is basically the same side effects, and if your truly gonna cruise, 500 mg is 100% the best starter option.
 
  • +1
Reactions: Bitterschön and Foreverbrad
I would say 500 mg, the difference between 250 and 500 in terms of benefits are huge, while it is basically the same side effects, and if your truly gonna cruise, 500 mg is 100% the best starter option.
Whats the usual cruise dose if blast is 500mg
 
  • +1
Reactions: Bitterschön
That was a Beautiful post ❤️‍🩹 But is it dangerous to use Steroids at 14 and where can I get the equipment for that ? And gives you Steroids more Bonemass and density?
 
That was a Beautiful post ❤️‍🩹 But is it dangerous to use Steroids at 14 and where can I get the equipment for that ? And gives you Steroids more Bonemass and density?
At 14, yes. Your endocrine system will never recover
 
  • +1
Reactions: Bitterschön
When should I start ? And what can I do now for good bonemass and a good maxilla
Its pretty individual, if you were an early bloomer you could start at 16. I do suppose you could take hgh, but I doubt it’s affordable
 
Its pretty individual, if you were an early bloomer you could start at 16. I do suppose you could take hgh, but I doubt it’s affordable
HGH is for good bonemass? Here in Swiss you can get it free by the doctor i think 🤔 You just have to tell than that you bones are weak
 
great thread, bookmarked for future use
 
  • Love it
Reactions: ropemaxxxx
  • +1
Reactions: longliveropemaxxing and Bitterschön
I would say 500 mg, the difference between 250 and 500 in terms of benefits are huge, while it is basically the same side effects, and if your truly gonna cruise, 500 mg is 100% the best starter option.
thx
 
  • +1
Reactions: ropemaxxxx
bump this sheet, before I read this I used to pin gh, tren, cheque drops right in my butthole
 
Dnr.
Injecting Test E subq reusing the same insulin pin for the 10th time
 
  • JFL
Reactions: Sadist
To start things off, I have seen a shit ton of posts on here about the use of anabolic steroids, but all they ever mention is doses, compounds etc. Never the small details that either make or break the experience (pinning).

There is a whole lot more to think about than just sticking a needle into your arse.

SYRINGES

Alright so first off your gonna need a good syringe, one that matches the amount you will be injecting.

There are syringes from 0,5 ml to 50 ml (your most likely never gonna need anything bigger than a 2 ml, if even that)

The standard for anabolic compounds is a 1 ml syringe, if the amount your going to be injecting is over that, just pin more than once for god sakes. Otherwise it will increase risk of pain and complications. But we will get into that later.

NEEDLES

Your going to need 2 different needles for each injection, a drawing needle and an injection needle (don’t be stupid and use only the injection needle because it WILL get dull from drawing and hurt significantly more)
I used single needles and it was fine
For a drawing needle I would recommend anything between a 18-21 gauge needle. If the steroid your using has a higher concentration (for an example 400 mg/ml test) use an 18 gauge as the liquid will be a lot thicker. Length does not really matter but it should be around 1-1,5 inches.

For a injection needle I would recommend anything between a 23-27 gauge needle, the higher the gauge the less painful it will be, but it will take a lot longer to inject. We will cover the optimal length of the injection needle later, since it is relative to your injection site.

Picking a injection site

There are many different sites you can choose to inject in, some more painful than others. My list will be for people who are injecting themselves (assuming you guys don’t have any friends 💔)

🥇 Ventrogluteal site

Minor amount of blood vessels/nerves
Easy to reach
Can hold large amounts of liquid (up to 3ml)

This is overall my favorite one, little to no pain and you can do it easily by yourself.

For this site you should be using ATLEAST a 1,5 inch needle as you most likely have high fat storage here.

🥈Vastus lateralis

Easy to reach
Can hold a large amounts of liquid (up to 3 ml)
Safe from larger blood vessels/nerves

This site is pretty comparable to the ventrogluteal site, but I would say it is more painful.
Average adult should use a 1 inch needle, if your fat use a 1,5 inch needle.

🥉Deltoid

This is the classic injection site, most people use it for the simplicity.

Easy to do yourself
Good for smaller injections (can only hold up to 1 ml)

It is a very easy to pick spot, but I would not recommend it since it is very painful, there are nerves and it can only hold a smaller amount of liquid.

1 Inch needle is recommended.
Delt is 10x less painful than quads to me
5/8in needles work if you are not obese
I did only 1ml injections in delts & quads
General tips

Use gloves
Use an alcohol swab before and after injecting
on the vial too if you use a single needle
Use the Z-track method
Inject slowly
1 ml a time is the least painful
Rotate between injection sites (dont use the same spot over and over again)

And that is about it, if you found this helpful please give me a thumbs up 🥹 my rep is actually shit.
 
good thread.
i would also recommend getting a screw-on syringe/needle systems instead of the slip-ons, as the latter tend to explode once the pressure gets too high
also, https://spotinjections.com/index3.htm can come in handy, especially for newer users, its very self-explanatory
 
  • +1
Reactions: ropemaxxxx
I used single needles and it was fine

Delt is 10x less painful than quads to me
5/8in needles work if you are not obese
I did only 1ml injections in delts & quads

on the vial too if you use a single needle
Yeah everything is pretty individual, just wrote about the usual routes to injecting 🙂
 
  • +1
Reactions: KaisenMaxxer

Similar threads

Will_381231
Replies
14
Views
303
Kane211
K
desvelosoul
Replies
19
Views
716
Swarthy Knight
Swarthy Knight
Hernan
Replies
94
Views
913
flambria
flambria
Sachlichkeit
Replies
12
Views
239
hapagenes2
hapagenes2

Users who are viewing this thread

Back
Top