how YOU yes you will synthesize your own GHK-Cu for MUCH cheaper (chemcels GTFIH)

[drxkes]

Yes you heard it right, i've been researching this for a couple of days and came to the realization that buying some of these peptides that are EASILY made (so not hgh, tren, test, etc) is totally useless and you should just make your own. So the question begins, how am I going to source & make this compound?:

First, the raw materials these are the ones provided:
$161 for 5g free base GHK (no copper / glcyl-L-Histidyl-L-Lysine)
$120 for 500mg Copper(II) chloride dihydrate, 98%
$9 ph strips

Distilled water + bacteriostatic water
Cheap Scale
Some Beakers
Either a home freeze-dryer or pay some lab $50 / run

You may be thinking "hey dude this is super expensive I thought this was a budget alternative" -> and to that your correct you can buy much lesser amounts, but the cost : amount ratio is gonna be much higher. If your intending this for personal use 1g of pure 99% GHK-Cu is not that outrageous that's only like 500 days if you pin every day & use 2mg. Also note that these took literally 1 minute to source I assure you if you find some Chinese or Indian connect the raw cost of these materials is gonna be much cheaper.

Okay so lets start, how do we cook?

Here's a 30 minute recipe (at most) on how to make it:

1. Weigh exactly 1.00 g GHK freebase (glcyl-L-Histidyl-L-Lysine) and add to a beaker
2. Add 70mL distilled water (note this should dissolve in ~10 seconds and be crystal clear)
3. Weigh the entire 500mg copper chloride (honestly just dump he entire bottle)
4. Pour copper and this observe as it hits the solution there should be a relative timeline to this:
0 sec = clear
3 sec = sky blue
10 sec = turquoise
25 sec = perfect deep royal blue

5. Stir 2 more minutes, top up to exactly 80mL total volume
6. Measure the PH should be around 5-7
6. Pour into two shallow freezer trays -> freeze solid overnight
7. Lyophilize it (either buy one or send it to some lab)

So boys, what's our yield? This yields for about 1.20 g and of 98.9-99.5% purity GHK-Cu (market price is around $1000-$1200 as most vendors sell a 50mg vial for $50 **not grey market obviously**)

 

[drxkes]

@bruhtoobrutal @Nexom

 

[Nexom]

Good thread, the problem is people will have to find new and safe sources for the raw materials and a lot of them are not willing to go through that.

 

[drxkes]

Good thread, the problem is people will have to find new and safe sources for the raw materials and a lot of them are not willing to go through that.

yeah true and lyophilizing

 

[drxkes]

bump

 

[Deleted member 60526]

Only makes sense if you are creating a lifetimes supply

 

[8psl100harmony]

bump for effort

 

[aids]

Fucking stupid thread. Just buy GHK-CU raws for cheaper Can source it for like $5-6/g.

 

[drxkes]

Fucking stupid thread. Just buy GHK-CU raws for cheaper Can source it for like $5-6/g.

So obviously your a bit lacking in IQ but that’s fine I clearly said this can and WILL be done cheaper it’s just a proof of concept that is much cheaper. If you actually buy the raw materials for the correct non jew cost it’d be very cheap

 

[aids]

So obviously your a bit lacking in IQ but that’s fine I clearly said this can and WILL be done cheaper it’s just a proof of concept that is much cheaper. If you actually buy the raw materials for the correct non jew cost it’d be very cheap

No point to buy GHK and copper raws separately when GHK-CU raws cost the exact same as GHK raws you dipshit.
You're adding extra steps and extra cost for no reason, with an even higher chance of sterility issues, assuming this 'method' even works.

 

[drxkes]

No point to buy GHK and copper raws separately when GHK-CU raws cost the exact same as GHK raws you dipshit.
You're adding extra steps and extra cost for no reason, with an even higher chance of sterility issues, assuming this 'method' even works.

wdym assuming the method works it’s basic chemistry ffs it’s just combining freebase and copper and binding them holy shit

 

[chadisbeingmade]

wdym assuming the method works it’s basic chemistry ffs it’s just combining freebase and copper and binding them holy shit

the point is your method is inferior and redundant

 

[aids]

wdym assuming the method works it’s basic chemistry ffs it’s just combining freebase and copper and binding them holy shit

Because I DNR'd the entire thing after I read the prices.
Stop replying to only the particular part of my sentence you can rebut, address the fact that the price of GHK raws is the same as GHK-CU raws, and the prices you mentioned here are fucking horrid.
You can't, so your thread is shit, as aforementioned.

 

[drxkes]

No point to buy GHK and copper raws separately when GHK-CU raws cost the exact same as GHK raws you dipshit.
You're adding extra steps and extra cost for no reason, with an even higher chance of sterility issues, assuming this 'method' even works.

it’s the same sterility issues as your just mixing solution if there was some type of pathogen in the air no matter what itd get to your solution

 

[hej1377]

Yeah lets spend money to have to do more shit when the raw finished product is dirt cheap

 

[drxkes]

Because I DNR'd the entire thing after I read the prices.
Stop replying to only the particular part of my sentence you can rebut, address the fact that the price of GHK raws is the same as GHK-CU raws, and the prices you mentioned here are fucking horrid.
You can't, so your thread is shit, as aforementioned.

the idea of the thread is still valid, there is a CHEAPER alternative although it may not but your favorite we can’t all win. I’m not doubting that GHK rates are sold for very cheap but that probably means they arent providing COAS or assuring purity, please send your magic GHK vendor so we can all see how good they are

 

[drxkes]

Yeah lets spend money to have to do nore shit when the raw finished product is dirt cheap

like i said these websites i provided are for chemistry not efficient cheap peptide production rates i can assure you its cheaper to buy it individually once you have a good vendor

 

[hej1377]

like i said these websites i provided are for chemistry not efficient cheap peptide production rates i can assure you its cheaper to buy it individually once you have a good vendor

Still even if you find cheaper sources youre saving such an insignificant amount of money, why bother?

A gram is like 20$, why the fuck shoudl anyone do an entire fucking synthesis and buy a bunch of equipment to be able to get it for 15$/gram

You have too much free time, get a hobby

 

[Deleted member 112562]

You may be thinking "hey dude this is super expensive I thought this was a budget alternative" -> and to that your correct you can buy much lesser amounts, but the cost : amount ratio is gonna be much higher. If your intending this for personal use 1g of pure 99% GHK-Cu is not that outrageous that's only like 500 days if you pin every day & use 2mg. Also note that these took literally 1 minute to source I assure you if you find some Chinese or Indian connect the raw cost of these materials is gonna be much cheaper.

That's why I pay them.
Why would I spend time and risk stress for saving money I could make in that time with a surplus?

JFL at those replies.

 

[44z]

dnr, doing all of this for Ghk Cu

 

[Greyascension]

Waste of time, time is money

 

[slaters]

Nigga

 

[drxkes]

this takes like 2 minutes maybe less to do

 

[Blue Steel]

This is fucking shit. OP is turning into Heisenberg just to save a few bucks. Jew.

 

[drxkes]

This is fucking shit. OP is turning into Heisenberg just to save a few bucks. Jew.

literally just mixing 2 compounds

 

[Blue Steel]

literally just mixing 2 compounds

Your post-rep ratio highlights how disgusting your retarded posts are

 

[drxkes]

Your post-rep ratio highlights how disgusting your retarded posts are

old posts and comments contributed nothing trying to get better — didnt know powdered Ghk was so cheap, but again this is just to learn more because i’m interning at pfizer in addition to that I will soon be making DMT and 2c-b to get better at chemistry.

 

[Ravn]

@EliDKing

 

[hej1377]

old posts and comments contributed nothing trying to get better — didnt know powdered Ghk was so cheap, but again this is just to learn more because i’m interning at pfizer in addition to that I will soon be making DMT and 2c-b to get better at chemistry.

The dmt and 2cb synthesis seems more interesting as ut might actually be usefull, please post that

 

[xorsot]

Have you tried this yourself though

 

[5.5psl]

Yes you heard it right, i've been researching this for a couple of days and came to the realization that buying some of these peptides that are EASILY made (so not hgh, tren, test, etc) is totally useless and you should just make your own. So the question begins, how am I going to source & make this compound?:

First, the raw materials these are the ones provided:
$161 for 5g free base GHK (no copper / glcyl-L-Histidyl-L-Lysine)
$120 for 500mg Copper(II) chloride dihydrate, 98%
$9 ph strips

Distilled water + bacteriostatic water
Cheap Scale
Some Beakers
Either a home freeze-dryer or pay some lab $50 / run

You may be thinking "hey dude this is super expensive I thought this was a budget alternative" -> and to that your correct you can buy much lesser amounts, but the cost : amount ratio is gonna be much higher. If your intending this for personal use 1g of pure 99% GHK-Cu is not that outrageous that's only like 500 days if you pin every day & use 2mg. Also note that these took literally 1 minute to source I assure you if you find some Chinese or Indian connect the raw cost of these materials is gonna be much cheaper.

Okay so lets start, how do we cook?

Here's a 30 minute recipe (at most) on how to make it:

1. Weigh exactly 1.00 g GHK freebase (glcyl-L-Histidyl-L-Lysine) and add to a beaker
2. Add 70mL distilled water (note this should dissolve in ~10 seconds and be crystal clear)
3. Weigh the entire 500mg copper chloride (honestly just dump he entire bottle)
4. Pour copper and this observe as it hits the solution there should be a relative timeline to this:
0 sec = clear
3 sec = sky blue
10 sec = turquoise
25 sec = perfect deep royal blue

5. Stir 2 more minutes, top up to exactly 80mL total volume
6. Measure the PH should be around 5-7
6. Pour into two shallow freezer trays -> freeze solid overnight
7. Lyophilize it (either buy one or send it to some lab)

So boys, what's our yield? This yields for about 1.20 g and of 98.9-99.5% purity GHK-Cu (market price is around $1000-$1200 as most vendors sell a 50mg vial for $50 **not grey market obviously**)

HOMEBREWING IS NOT RECOMMENDED DUDE JUST BUY IT OFF A TRUSTED SOURCE YOU CAN SERIOUSLY FUCK UP IF YOU DONT KNOW WHAT YOU ARE DOING ( AND BELIEVE ME YOU DONT KNOW EVERYTHING)