I just did my first Lipolab-Session.

[Jonas2k7]

I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

• Syringes, I used 3ml ones
• Needles, preferably 30G needles
• Alcohol wipes to disinfect the injection area
• Pen, to mark every space you want to inject
• Lipolab vial, self-explanatory

Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM

 

[chadisbeingmade]

Maybe I'll post results in a few weeks.

Gonna take a lot longer than that - if you do weekly sessions.

I used Aqualyx for slight naso folds. Takes 1-2 whole vials of Aqualyx to get results.

 

[Jonas2k7]

Gonna take a lot longer than that - if you do weekly sessions.

I used Aqualyx for slight naso folds. Takes 1-2 whole vials of Aqualyx to get results.

Yeah, Aqualyx is a bit more effective. If I'd have to repeat this procedure I'd use Aqualyx, Lipolab was just a bit cheaper.

I should hopefully see some results in 2-3 weeks I guess.

 

[MyDreamIsToBe183CM]

I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

• Syringes, I used 3ml ones
• Needles, preferably 30G needles
• Alcohol wipes to disinfect the injection area
• Pen, to mark every space you want to inject
• Lipolab vial, self-explanatory

Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM

Damnn good shitt bhai

 

[meathead]

I should hopefully see some results in 2-3 weeks I guess.

you def need more

 

[lestoa]

Source and how much did you pay for everything ?

 

[Jonas2k7]

Damnn good shitt bhai

I finally did the procedure bro

What did you do different during your Aqualyx-session?

 

[Jonas2k7]

Source and how much did you pay for everything ?

I ordered from some german local site, Lipolab/Aqualyx should be available worldwide. I paid around 25 Euros shipment inclusive.

 

[lestoa]

I ordered from some german local site, Lipolab/Aqualyx should be available worldwide. I paid around 25 Euros shipment inclusive.

can you check dms

 

[MyDreamIsToBe183CM]

I finally did the procedure bro

What did you do different during your Aqualyx-session?

I used lipolab.
I did 19x per cheek 0.2 mL each injection spot

And shit I forgot how much for double chin was like 20+

 

[Jonas2k7]

@Orc @Angutoid @sb23 @mrmogger2882 @JohnBaza @Linus1888

Hopefully a decent and helpful thread.

 

[Angutoid]

big bolz

 

[FoidFumbler]

W

 

[demerol]

Did your face swell up sir.

 

[edodalic29]

fuck that shiet
Some bloated rice here tried doing the same thing and hit a nerve , and everyone who did lipolab or lemon bottle never posted a actual before and after so im guessing its cope

 

[Jonas2k7]

Did your face swell up sir.

Not yet. It should swell for up to 1-2 weeks significantly.

fuck that shiet
Some bloated rice here tried doing the same thing and hit a nerve , and everyone who did lipolab or lemon bottle never posted a actual before and after so im guessing its cope

Orc posted results if I remember correctly. Also you are right lemon bottle is cope, but Lipolab and Aqualyx really work.

 

[JohnBaza]

I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

• Syringes, I used 3ml ones
• Needles, preferably 30G needles
• Alcohol wipes to disinfect the injection area
• Pen, to mark every space you want to inject
• Lipolab vial, self-explanatory

Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM

what does this do

 

[4lt.Real]

Maybe I'll post results in a few weeks.

yay face rev

 

[Jonas2k7]

what does this do

Can spot-reduce fat literally.

So if you have stubborn fat in your abdomen area you could also inject there and get "leaner" around your core. It's a really good option.

 

[copercel123]

I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

• Syringes, I used 3ml ones
• Needles, preferably 30G needles
• Alcohol wipes to disinfect the injection area
• Pen, to mark every space you want to inject
• Lipolab vial, self-explanatory

Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM

where did you buy it

 

[niqfan625]

I used lipolab.
I did 19x per cheek 0.2 mL each injection spot

And shit I forgot how much for double chin was like 20+

How many sessions? I think ill do 3-4?

 

[niqfan625]

I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

• Syringes, I used 3ml ones
• Needles, preferably 30G needles
• Alcohol wipes to disinfect the injection area
• Pen, to mark every space you want to inject
• Lipolab vial, self-explanatory

Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM

Is there any reason you did 0,3 ml instead of 0,2 ml like orc suggests?

 

[Jonas2k7]

How many sessions? I think ill do 3-4?

You can do how many you want until you achieve the results you want, just space the sessions 2-3 weeks atleast apart.

Is there any reason you did 0,3 ml instead of 0,2 ml like orc suggests?

I think Orc used 0,2ml of Aqualyx, I used Lipolab (A little bit weaker version) so I did 0,3ml. Also I don't think the 0,1ml increase is that significant so I just did it. I had no complications so it's all good.

 

[niqfan625]

You can do how many you want until you achieve the results you want, just space the sessions 2-3 weeks atleast apart.

I think Orc used 0,2ml of Aqualyx, I used Lipolab (A little bit weaker version) so I did 0,3ml. Also I don't think the 0,1ml increase is that significant so I just did it. I had no complications so it's all good.

Ok i have lipolab too, so ill do 0,3 ml as well. Do i really need to wait 2-3 weeks? Or can i just do every week? Other wise id do every 2 weeks

 

[Jonas2k7]

Ok i have lipolab too, so ill do 0,3 ml as well. Do i really need to wait 2-3 weeks? Or can i just do every week? Other wise id do every 2 weeks

I'd recommend waiting 3 weeks, but if you feel good 2 weeks should be good enough. Rep me back nigguh

 

[niqfan625]

I'd recommend waiting 3 weeks, but if you feel good 2 weeks should be good enough. Rep me back nigguh

Alr bro yeah i want to ascend fast im also leanmaxxing rn so waiting 3 Weeks feels long

 

[niqfan625]

I'd recommend waiting 3 weeks, but if you feel good 2 weeks should be good enough. Rep me back nigguh

I asked chatgpt and he said i should wait 7-14 days between sessions

 

[Jonas2k7]

Alr bro yeah i want to ascend fast im also leanmaxxing rn so waiting 3 Weeks feels long

Yeah I feel that, but more = isnt better always. I'm also leanmaxxing right now.

I asked chatgpt and he said i should wait 7-14 days between sessions

Just do 2 weeks between each session then. But listen to your body if you don't feel ready to do the 2nd session.

 

[niqfan625]

Yeah I feel that, but more = isnt better always. I'm also leanmaxxing right now.

Just do 2 weeks between each session then. But listen to your body if you don't feel ready to do the 2nd session.

Ok ill start next week since im going to belgium for two days soon dont want to be bloated there

 

[DR. NICKGA]

You #chad

 

[Newday*V3]

Did you pinch the skin before hand to make sure it hit fat, or did you just pin the dots directly and estimate your subq fat stores?

 

[kitten]

I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

• Syringes, I used 3ml ones
• Needles, preferably 30G needles
• Alcohol wipes to disinfect the injection area
• Pen, to mark every space you want to inject
• Lipolab vial, self-explanatory

Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM

no isnt maybe please post results asap

 

[Jonas2k7]

Did you pinch the skin before hand to make sure it hit fat, or did you just pin the dots directly and estimate your subq fat stores?

I didn't pinch the skin, I was more comfortable going a bit less deep to compensate for that. Also I didnt make "dots", it was more like areas I marked.

 

[playxiing]

low iq

 

[Jonas2k7]

low iq

Explain rather than just commenting "low iq".

I also checked your thread history, most of them are posted in off-topic.

 

[SDPmaggot]

Some bloated rice here tried doing the same thing and hit a nerve

Who is it?
did he go blind or something??