I just did my first Lipolab-Session.

Jonasㅤㅤ

Jonasㅤㅤ

Slaying at the beach
Contributor
Joined
Sep 3, 2023
Posts
6,791
Reputation
22,303
I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

  • Syringes, I used 3ml ones
  • Needles, preferably 30G needles
  • Alcohol wipes to disinfect the injection area
  • Pen, to mark every space you want to inject
  • Lipolab vial, self-explanatory
Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM
 
  • +1
  • JFL
Reactions: everyone, EliDKing, penaldinho and 21 others
Maybe I'll post results in a few weeks.
Gonna take a lot longer than that - if you do weekly sessions.

I used Aqualyx for slight naso folds. Takes 1-2 whole vials of Aqualyx to get results.
 
  • +1
Reactions: everyone, JizzFarmer, narex054 and 1 other person
Gonna take a lot longer than that - if you do weekly sessions.

I used Aqualyx for slight naso folds. Takes 1-2 whole vials of Aqualyx to get results.
Yeah, Aqualyx is a bit more effective. If I'd have to repeat this procedure I'd use Aqualyx, Lipolab was just a bit cheaper.

I should hopefully see some results in 2-3 weeks I guess.
 
  • +1
Reactions: Krystoflachowski, St.Rotter, 4lt.Real and 1 other person
I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

  • Syringes, I used 3ml ones
  • Needles, preferably 30G needles
  • Alcohol wipes to disinfect the injection area
  • Pen, to mark every space you want to inject
  • Lipolab vial, self-explanatory
Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM
Damnn good shitt bhai
 
  • +1
  • Love it
Reactions: etherwake, StacyRepellent, Fusionxz and 1 other person
Source and how much did you pay for everything ?
 
  • +1
Reactions: Fusionxz and Jonasㅤㅤ
  • +1
Reactions: St.Rotter, Fusionxz and MyDreamIsToBe183CM
Source and how much did you pay for everything ?
I ordered from some german local site, Lipolab/Aqualyx should be available worldwide. I paid around 25 Euros shipment inclusive.
 
  • +1
  • Woah
Reactions: St.Rotter, Fusionxz, MyDreamIsToBe183CM and 1 other person
I ordered from some german local site, Lipolab/Aqualyx should be available worldwide. I paid around 25 Euros shipment inclusive.
can you check dms
 
  • +1
Reactions: Fusionxz and Jonasㅤㅤ
I finally did the procedure bro 😅

What did you do different during your Aqualyx-session?
I used lipolab.
I did 19x per cheek 0.2 mL each injection spot

And shit I forgot how much for double chin was like 20+
 
  • +1
Reactions: etherwake, StacyRepellent, niqfan625 and 1 other person
@Orc @Angutoid @sb23 @mrmogger2882 @JohnBaza @Linus1888

Hopefully a decent and helpful thread.
 
  • +1
  • Woah
Reactions: St.Rotter, tit, JohnBaza and 2 others
big bolz
 
  • Love it
  • +1
Reactions: Jonasㅤㅤ and Fusionxz
W
 
  • Love it
Reactions: Jonasㅤㅤ
Did your face swell up sir.
 
  • +1
Reactions: Jonasㅤㅤ
fuck that shiet
Some bloated rice here tried doing the same thing and hit a nerve , and everyone who did lipolab or lemon bottle never posted a actual before and after so im guessing its cope
 
  • +1
  • Woah
Reactions: SDPmaggot, lucifer6969 and Jonasㅤㅤ
Did your face swell up sir.
Not yet. It should swell for up to 1-2 weeks significantly.
fuck that shiet
Some bloated rice here tried doing the same thing and hit a nerve , and everyone who did lipolab or lemon bottle never posted a actual before and after so im guessing its cope
Orc posted results if I remember correctly. Also you are right lemon bottle is cope, but Lipolab and Aqualyx really work.
 
  • +1
Reactions: St.Rotter, demerol and Fusionxz
I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

  • Syringes, I used 3ml ones
  • Needles, preferably 30G needles
  • Alcohol wipes to disinfect the injection area
  • Pen, to mark every space you want to inject
  • Lipolab vial, self-explanatory
Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM
what does this do
 
  • +1
  • JFL
Reactions: Newday*V3 and Jonasㅤㅤ
what does this do
Can spot-reduce fat literally.

So if you have stubborn fat in your abdomen area you could also inject there and get "leaner" around your core. It's a really good option.
 
  • Woah
  • +1
Reactions: St.Rotter and JohnBaza
I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

  • Syringes, I used 3ml ones
  • Needles, preferably 30G needles
  • Alcohol wipes to disinfect the injection area
  • Pen, to mark every space you want to inject
  • Lipolab vial, self-explanatory
Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM
where did you buy it
 
  • +1
Reactions: jeff1234
  • +1
Reactions: Jonasㅤㅤ
I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

  • Syringes, I used 3ml ones
  • Needles, preferably 30G needles
  • Alcohol wipes to disinfect the injection area
  • Pen, to mark every space you want to inject
  • Lipolab vial, self-explanatory
Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM
Is there any reason you did 0,3 ml instead of 0,2 ml like orc suggests?
 
  • +1
Reactions: Jonasㅤㅤ
How many sessions? I think ill do 3-4?
You can do how many you want until you achieve the results you want, just space the sessions 2-3 weeks atleast apart.
Is there any reason you did 0,3 ml instead of 0,2 ml like orc suggests?
I think Orc used 0,2ml of Aqualyx, I used Lipolab (A little bit weaker version) so I did 0,3ml. Also I don't think the 0,1ml increase is that significant so I just did it. I had no complications so it's all good.
 
  • +1
Reactions: St.Rotter and niqfan625
You can do how many you want until you achieve the results you want, just space the sessions 2-3 weeks atleast apart.

I think Orc used 0,2ml of Aqualyx, I used Lipolab (A little bit weaker version) so I did 0,3ml. Also I don't think the 0,1ml increase is that significant so I just did it. I had no complications so it's all good.
Ok i have lipolab too, so ill do 0,3 ml as well. Do i really need to wait 2-3 weeks? Or can i just do every week? Other wise id do every 2 weeks
 
  • +1
Reactions: Jonasㅤㅤ
Ok i have lipolab too, so ill do 0,3 ml as well. Do i really need to wait 2-3 weeks? Or can i just do every week? Other wise id do every 2 weeks
I'd recommend waiting 3 weeks, but if you feel good 2 weeks should be good enough. Rep me back nigguh :ogre:
 
  • +1
Reactions: St.Rotter and niqfan625
I'd recommend waiting 3 weeks, but if you feel good 2 weeks should be good enough. Rep me back nigguh :ogre:
Alr bro😂 yeah i want to ascend fast im also leanmaxxing rn so waiting 3 Weeks feels long
 
  • +1
Reactions: Jonasㅤㅤ
I'd recommend waiting 3 weeks, but if you feel good 2 weeks should be good enough. Rep me back nigguh :ogre:
I asked chatgpt and he said i should wait 7-14 days between sessions
 
  • +1
Reactions: Jonasㅤㅤ
Alr bro😂 yeah i want to ascend fast im also leanmaxxing rn so waiting 3 Weeks feels long
Yeah I feel that, but more = isnt better always. I'm also leanmaxxing right now.
I asked chatgpt and he said i should wait 7-14 days between sessions
Just do 2 weeks between each session then. But listen to your body if you don't feel ready to do the 2nd session.
 
  • +1
Reactions: St.Rotter and niqfan625
Yeah I feel that, but more = isnt better always. I'm also leanmaxxing right now.

Just do 2 weeks between each session then. But listen to your body if you don't feel ready to do the 2nd session.
Ok ill start next week since im going to belgium for two days soon dont want to be bloated there
 
  • +1
Reactions: Jonasㅤㅤ
You #chad
 
  • Love it
  • +1
Reactions: NCKAxBNSMH and Jonasㅤㅤ
Did you pinch the skin before hand to make sure it hit fat, or did you just pin the dots directly and estimate your subq fat stores?
 
  • +1
Reactions: Jonasㅤㅤ
I injected the whole 10ml vial into the submental area and beside the ramus.

I opted for 0.3ml per injection site and did around 20 injections.

To replicate this procedure you need the following:

  • Syringes, I used 3ml ones
  • Needles, preferably 30G needles
  • Alcohol wipes to disinfect the injection area
  • Pen, to mark every space you want to inject
  • Lipolab vial, self-explanatory
Preload the needles with the compound and disinfect the injection sites. After that mark every spot you want to inject each 1-2cm spaced apart. Try to go for a 45° angle and around 0.3-.04 inches deepness.

Feel free to choose what injection site you want to inject in, I chose the submental area and ramus because I lack definition in these areas. You can also go for the cheeks, but only subcutaneous because the deeper fat pads don't contribute to the hollowing most likely.

I had a bit of a burning sensation during the injection and afterwards, but that means it works. The injection pain wasn't that big, it's more of a head thing.

I only encountered one problem: A bit of the compound clumped around my ramus, to fix this you could just massage the tissue and try to get more blood flow in your neck.

Maybe I'll post results in a few weeks.

Tags:
@lestoa
@halloweed
@N1666
@DR. NICKGA
@MyDreamIsToBe183CM
no isnt maybe please post results asap
 
Did you pinch the skin before hand to make sure it hit fat, or did you just pin the dots directly and estimate your subq fat stores?
I didn't pinch the skin, I was more comfortable going a bit less deep to compensate for that. Also I didnt make "dots", it was more like areas I marked.

1740144133434
 
  • +1
Reactions: St.Rotter
Explain rather than just commenting "low iq".

I also checked your thread history, most of them are posted in off-topic.
 
  • +1
Reactions: everyone and St.Rotter
Yeah, Aqualyx is a bit more effective. If I'd have to repeat this procedure I'd use Aqualyx, Lipolab was just a bit cheaper.

I should hopefully see some results in 2-3 weeks I guess.
It takes 2 weeks just for the swelling to be gone. If you see anything from the first session, it will be around 4 weeks at the earliest. Final results tend to manifest around 12 weeks.
 
  • +1
Reactions: Jonasㅤㅤ
fuck that shiet
Some bloated rice here tried doing the same thing and hit a nerve , and everyone who did lipolab or lemon bottle never posted a actual before and after so im guessing its cope
Send thread
 
It takes 2 weeks just for the swelling to be gone. If you see anything from the first session, it will be around 4 weeks at the earliest. Final results tend to manifest around 12 weeks.
Does this apply for aqualyx also?
 

Similar threads

ropemaxxxx
Replies
56
Views
1K
mirinturbolowinhib
mirinturbolowinhib
renos
Replies
32
Views
347
Amceo
Amceo
GigaAryenMaxxer
Replies
80
Views
2K
slaters
slaters
Copercel
Replies
143
Views
4K
Copercel
Copercel
mcmentalonthemic
Replies
72
Views
4K
shibeed
shibeed

Users who are viewing this thread

Back
Top