My New Mouth Widening Invention Without Smile Lines

[Angutoid]

So this is how it looks like:

I could make it more complicated but i wanted it to cost less so every narrow mouthcel could benefit.
Wear this overnight!!!

You need 2 more things (1 if you don't care about smile lines) to use with this:
A rubber band (Smaller the size more the pressure is)
Double sided tape (To avoid smile lines)

So the first step is to tear the rubber band and tie it after passing it through both of the hooks.
This is how it should look like:

Then you need to cut 2 pieces of double sided tape and remove one side of them only. (Or just use a really strong tape, I don't have any right now)
Stretch the skin here and put on the tape individually so they hold the stretch in these areas:

Make sure you stretch the skin well, this is how it should look like:

So your final setup should look like this:

Now let's get to the the pros:

1. The pressure is sooooo much more than the old one.
2. (Read 1. again) The results will come quicker than ever.
3. You will achieve a wider mouth without having to deal with naso folds.

I could demonstrate it IRL but i promised some users to post this today so maybe later.

Here you have the link:

3D design Mouth Widening 2024 - Tinkercad

3D design Mouth Widening 2024

www.tinkercad.com

I could actually make this model cost like a dollar to kinda avoid tiktokcels from benefitting from it but idk just have it for free

Tags:
@oppastoppathe2nd
@cc_7373
@castizo
@alpslover
@no-mogger-no-cry
@97baHater
@antony 726
@14yearoldpslmogger
@6PSLcel
@NZb6Air

 

[IBlameLucifer]

So this is how it looks like:
View attachment 3166967
I could make it more complicated but i wanted it to cost less so every narrow mouthcel could benefit.
Wear this overnight!!!

You need 2 more things (1 if you don't care about smile lines) to use with this:
A rubber band (Smaller the size more the pressure is)
Double sided tape (To avoid smile lines)

So the first step is to tear the rubber band and tie it after passing it through both of the hooks.
This is how it should look like:
View attachment 3166970

Then you need to cut 2 pieces of double sided tape and remove one side of them only. (Or just use a really strong tape, I don't have any right now)
Stretch the skin here and put on the tape individually so they hold the stretch in these areas:

View attachment 3166976

Make sure you stretch the skin well, this is how it should look like:
View attachment 3166985

So your final setup should look like this:

View attachment 3166988

Now let's get to the the pros:

1. The pressure is sooooo much more than the old one.
2. (Read 1. again) The results will come quicker than ever.
3. You will achieve a wider mouth without having to deal with naso folds.

I could demonstrate it IRL but i promised some users to post this today so maybe later.

Here you have the link:

3D design Mouth Widening 2024 - Tinkercad

3D design Mouth Widening 2024

www.tinkercad.com

I could actually make this model cost like a dollar to kinda avoid tiktokcels from benefitting from it but idk just have it for free

Tags:
@oppastoppathe2nd
@cc_7373
@castizo
@alpslover
@no-mogger-no-cry
@97baHater
@antony 726
@14yearoldpslmogger
@6PSLcel
@NZb6Air

+99 karma for you this is a great idea.

 

[PeakIncels]

 

[StarvedEpi]

this is gonna fuck people palate up lol they don't have the expertise just fucking grind and get a palate expander at that point your gonna need real orthodontics to fix your palate with this autist orthodontics.

every week i swear there is some new orthodontic cope

 

[Angutoid]

this is gonna fuck people palate up lol they don't have the expertise just fucking grind and get a palate expander at that point your gonna need real orthodontics to fix your palate with this autist orthodontics.

every week i swear there is some new orthodontic cope

Palate? This is for lips....

 

[geenk worg]

based. good shit op

 

[StarvedEpi]

Palate? This is for lips....

sorry unc i thought this was some retarded new palate mouth pull method, im as autist as the people who do them

 

[Angutoid]

bump

 

[cc_7373]

So this is how it looks like:
View attachment 3166967
I could make it more complicated but i wanted it to cost less so every narrow mouthcel could benefit.
Wear this overnight!!!

You need 2 more things (1 if you don't care about smile lines) to use with this:
A rubber band (Smaller the size more the pressure is)
Double sided tape (To avoid smile lines)

So the first step is to tear the rubber band and tie it after passing it through both of the hooks.
This is how it should look like:
View attachment 3166970

Then you need to cut 2 pieces of double sided tape and remove one side of them only. (Or just use a really strong tape, I don't have any right now)
Stretch the skin here and put on the tape individually so they hold the stretch in these areas:

View attachment 3166976

Make sure you stretch the skin well, this is how it should look like:
View attachment 3166985

So your final setup should look like this:

View attachment 3166988

Now let's get to the the pros:

1. The pressure is sooooo much more than the old one.
2. (Read 1. again) The results will come quicker than ever.
3. You will achieve a wider mouth without having to deal with naso folds.

I could demonstrate it IRL but i promised some users to post this today so maybe later.

Here you have the link:

3D design Mouth Widening 2024 - Tinkercad

3D design Mouth Widening 2024

www.tinkercad.com

I could actually make this model cost like a dollar to kinda avoid tiktokcels from benefitting from it but idk just have it for free

Tags:
@oppastoppathe2nd
@cc_7373
@castizo
@alpslover
@no-mogger-no-cry
@97baHater
@antony 726
@14yearoldpslmogger
@6PSLcel
@NZb6Air

Seems good, now we just need some grey or curry to test it

 

[yue]

the tape stuff sounds legit, but why the different design, the old one worked just fine

 

[Angutoid]

the tape stuff sounds legit, but why the different design, the old one worked just fine

Do u mean the original one or the splitted version i made of it

 

[Angutoid]

the tape stuff sounds legit, but why the different design, the old one worked just fine

With this design the pressure is adjustable by changing the rubber band length

 

[yue]

With this design the pressure is adjustable by changing the rubber band length

oh yea I guess

 

[ronald_2]

Isnt it possible to achieve the same results of a mouth widening device by just stretching the corners of the mouth with the fingers everyday for several minutes?

 

[Angutoid]

Isnt it possible to achieve the same results of a mouth widening device by just stretching the corners of the mouth with the fingers everyday for several minutes?

U cant stretch your mouth with fingers overnight nor apply the same amount of pressure in both fingers

 

[Angutoid]

bump

 

[Angutoid]

Last bump

 

[Angutoid]

Why dont the tagged niggas rep!! Do they all think this is bs!!!????
@alpslover
@no-mogger-no-cry
@antony 726
@14yearoldpslmogger
@6PSLcel

 

[princeofpeace]

So this is how it looks like:
View attachment 3166967
I could make it more complicated but i wanted it to cost less so every narrow mouthcel could benefit.
Wear this overnight!!!

You need 2 more things (1 if you don't care about smile lines) to use with this:
A rubber band (Smaller the size more the pressure is)
Double sided tape (To avoid smile lines)

So the first step is to tear the rubber band and tie it after passing it through both of the hooks.
This is how it should look like:
View attachment 3166970

Then you need to cut 2 pieces of double sided tape and remove one side of them only. (Or just use a really strong tape, I don't have any right now)
Stretch the skin here and put on the tape individually so they hold the stretch in these areas:

View attachment 3166976

Make sure you stretch the skin well, this is how it should look like:
View attachment 3166985

So your final setup should look like this:

View attachment 3166988

Now let's get to the the pros:

1. The pressure is sooooo much more than the old one.
2. (Read 1. again) The results will come quicker than ever.
3. You will achieve a wider mouth without having to deal with naso folds.

I could demonstrate it IRL but i promised some users to post this today so maybe later.

Here you have the link:

3D design Mouth Widening 2024 - Tinkercad

3D design Mouth Widening 2024

www.tinkercad.com

I could actually make this model cost like a dollar to kinda avoid tiktokcels from benefitting from it but idk just have it for free

Tags:
@oppastoppathe2nd
@cc_7373
@castizo
@alpslover
@no-mogger-no-cry
@97baHater
@antony 726
@14yearoldpslmogger
@6PSLcel
@NZb6Air

You are a W. I’ve had this same exact concept in mind just was going to use elastic clips with attachments but never got around to it. This looks cleaner. Good work.

 

[princeofpeace]

Isnt it possible to achieve the same results of a mouth widening device by just stretching the corners of the mouth with the fingers everyday for several minutes?

Yes but your fingers become numb after a couple minutes and for me they feel really hot because my mouth warms them so it’s just uncomfortable and inefficient. This is superior.

 

[Rigged]

So this is how it looks like:
View attachment 3166967
I could make it more complicated but i wanted it to cost less so every narrow mouthcel could benefit.
Wear this overnight!!!

You need 2 more things (1 if you don't care about smile lines) to use with this:
A rubber band (Smaller the size more the pressure is)
Double sided tape (To avoid smile lines)

So the first step is to tear the rubber band and tie it after passing it through both of the hooks.
This is how it should look like:
View attachment 3166970

Then you need to cut 2 pieces of double sided tape and remove one side of them only. (Or just use a really strong tape, I don't have any right now)
Stretch the skin here and put on the tape individually so they hold the stretch in these areas:

View attachment 3166976

Make sure you stretch the skin well, this is how it should look like:
View attachment 3166985

So your final setup should look like this:

View attachment 3166988

Now let's get to the the pros:

1. The pressure is sooooo much more than the old one.
2. (Read 1. again) The results will come quicker than ever.
3. You will achieve a wider mouth without having to deal with naso folds.

I could demonstrate it IRL but i promised some users to post this today so maybe later.

Here you have the link:

3D design Mouth Widening 2024 - Tinkercad

3D design Mouth Widening 2024

www.tinkercad.com

I could actually make this model cost like a dollar to kinda avoid tiktokcels from benefitting from it but idk just have it for free

Tags:
@oppastoppathe2nd
@cc_7373
@castizo
@alpslover
@no-mogger-no-cry
@97baHater
@antony 726
@14yearoldpslmogger
@6PSLcel
@NZb6Air

Make it a product and sell it, also in theory taking a donut shaped object making it vibrate and adjustable could make lips thicker

Ofcourse im not good at drawing but it would fill up the mouth and mainly push up and down till the lips stretched

 

[ronald_2]

Yes but your fingers become numb after a couple minutes and for me they feel really hot because my mouth warms them so it’s just uncomfortable and inefficient. This is superior.

Well what I do is apply a force strong enough that it makes me feel pain in my mouth and keep that tension for like 20 seconds. And I do it several times a day. I dont know if it will work but at least I feel like Im doing something.

 

[Angutoid]

Make it a product and sell it, also in theory taking a donut shaped object making it vibrate and adjustable could make lips thicker

Ofcourse im not good at drawing but it would fill up the mouth and mainly push up and down till the lips stretched

pm me we can make a more detailed sketch

 

[Angutoid]

Give me contributer role

I am an inventor https://looksmax.org/threads/mouth-widening-appliance-improved-version.1078564/ https://looksmax.org/threads/my-new-mouth-widening-invention-without-smile-lines.1150984/

looksmax.org

rep this please everybody

 

[cooldude1231]

Wont this throw off the chin to mouth ratio?

 

[Angutoid]

Wont this throw off the chin to mouth ratio?

depends

 

[DNRDniggerking]

would rather reincarnate

 

[Angutoid]

Wont this throw off the chin to mouth ratio?

even if it does widening the chin with surgery is a lot simpler/safer than widening mouth with surgery so i think ur good

 

[cooldude1231]

even if it does widening the chin with surgery is a lot simpler/safer than widening mouth with surgery so i think ur good

Assuming people get surgery though

 

[Angutoid]

Assuming people get surgery though

theres pretty much nothing into looksmaxxing except for hardmaxxing tbh

 

[thegiganigga]

mirin, willing to test

 

[Angutoid]

mirin, willing to test

Lmk

 

[thegiganigga]

Lmk

right now, how much is it? can you ship it to canada

 

[Angutoid]

right now, how much is it? can you ship it to canada

I didnt produce it bro the model is free you should get it printed from ur local 3d printing service

 

[thegiganigga]

I didnt produce it bro the model is free you should get it printed from ur local 3d printing service

based doin that shi asap

 

[Angutoid]

based doin that shi asap

U can also check out my previous model (its an improved version of the existing one in botb) it gives me results

 

[thegiganigga]

U can also check out my previous model (its an improved version of the existing one in botb) it gives me results

bet i’ll let you know

thanks man

 

[Angutoid]

bet i’ll let you know

thanks man

ur welcome bro

 

[NZb6Air]

i dont get notifs from post tags for some reason

the stretch has to be gentle and u have to pin GHKcu, then it'll work maybe

 

[Angutoid]

Bump

 

[thecel]

Disclaimer: DO NOT USE. This "invention" would probably fuck up your eyes.

 

[Angutoid]

Woah

 

[antony 726]

So this is how it looks like:
View attachment 3166967
I could make it more complicated but i wanted it to cost less so every narrow mouthcel could benefit.
Wear this overnight!!!

You need 2 more things (1 if you don't care about smile lines) to use with this:
A rubber band (Smaller the size more the pressure is)
Double sided tape (To avoid smile lines)

So the first step is to tear the rubber band and tie it after passing it through both of the hooks.
This is how it should look like:
View attachment 3166970

Then you need to cut 2 pieces of double sided tape and remove one side of them only. (Or just use a really strong tape, I don't have any right now)
Stretch the skin here and put on the tape individually so they hold the stretch in these areas:

View attachment 3166976

Make sure you stretch the skin well, this is how it should look like:
View attachment 3166985

So your final setup should look like this:

View attachment 3166988

Now let's get to the the pros:

1. The pressure is sooooo much more than the old one.
2. (Read 1. again) The results will come quicker than ever.
3. You will achieve a wider mouth without having to deal with naso folds.

I could demonstrate it IRL but i promised some users to post this today so maybe later.

Here you have the link:

3D design Mouth Widening 2024 - Tinkercad

3D design Mouth Widening 2024

www.tinkercad.com

I could actually make this model cost like a dollar to kinda avoid tiktokcels from benefitting from it but idk just have it for free

Tags:
@oppastoppathe2nd
@cc_7373
@castizo
@alpslover
@no-mogger-no-cry
@97baHater
@antony 726
@14yearoldpslmogger
@6PSLcel
@NZb6Air

Amazing bro thanks a lot I fill make something like this soon