Science-Based Lifting 101: The Complete Guide

[til<3D]

absolutely unnecessary to dedicate an entire day to arms

"science based" and in the next sentence you claim a split containing a separate arm day is "solid overall"?

Arnold Split is shit but I wanted to be nice because he was nice to me

 

[til<3D]

“if your training is bad you will not build muscle”

Yeah that’s true

 

[lent vent]

absolutely unnecessary to dedicate an entire day to arms

I know, but I like to train arms, and I have only 30 min to workout the day I do it

 

[lent vent]

Arnold Split is shit but I wanted to be nice because he was nice to me

Which split would you recommend?

 

[til<3D]

Which split would you recommend?

Full body 3× per week (or every other day)
Upper 3× per week (or every other day)
Any 2 on / 1 off split (Upper/Lower, Push/Pull without legs, Torso/Limbs)

 

[redeemthecard]

Arnold Split is shit but I wanted to be nice because he was nice to me

you can tell him his split sucks dick without being rude about it lol.

 

[lent vent]

Full body 3× per week (or every other day)
Upper 3× per week (or every other day)
Any 2 on / 1 off split (Upper/Lower, Push/Pull without legs, Torso/Limbs)

I can go to the gym 4 days a week, do you think 3 days upper and 1 lower would be a good split? And how would you divide it

 

[til<3D]

I can go to the gym 4 days a week, do you think 3 days upper and 1 lower would be a good split? And how would you divide it

just Upper with min 2 sleeps between each day

 

[lent vent]

just Upper with min 2 sleeps between each day

Why not train legs?

 

[til<3D]

Why not train legs?

makes no fun + 1 times a week not very productive + you need rest when you play Tennis and this chinese thing

 

[lent vent]

makes no fun + 1 times a week not very productive + you need rest when you play Tennis and this chinese thing

Lol

 

[lent vent]

makes no fun + 1 times a week not very productive + you need rest when you play Tennis and this chinese thing

Would you rate my physique?

 

[til<3D]

Would you rate my physique?

sure

 

[lent vent]

sure

Im 16 and go to the gym for about 2 years, I'm 1,81 cm and 81 kg

 

[til<3D]

Im 16 and go to the gym for about 2 years, I'm 1,81 cm and 81 kg

you have a phenomenal aesthetic foundation

Strong Parts: Arms, Shoulders and Face

Weak Parts : Focus heavily on Chest and Legs



Monday: Upper (Chest Focus)

Tuesday: Lower

Wednesday: Rest

Thursday: Upper (Chest Focus) + Tennis

Friday: Lower + Tennis

Saturday: Rest / Jiu-Jitsu

Sunday: Rest

 

[lent vent]

you have a phenomenal aesthetic foundation

Strong Parts: Arms, Shoulders and Face

Weak Parts : Focus heavily on Chest and Legs



Monday: Upper (Chest Focus)

Tuesday: Lower

Wednesday: Rest

Thursday: Upper (Chest Focus) + Tennis

Friday: Lower + Tennis

Saturday: Rest / Jiu-Jitsu

Sunday: Rest

Thanks man, appreciate it.
I will follow this training schedule this week, thanks.

 

[lent vent]

you have a phenomenal aesthetic foundation

Strong Parts: Arms, Shoulders and Face

Weak Parts : Focus heavily on Chest and Legs



Monday: Upper (Chest Focus)

Tuesday: Lower

Wednesday: Rest

Thursday: Upper (Chest Focus) + Tennis

Friday: Lower + Tennis

Saturday: Rest / Jiu-Jitsu

Sunday: Rest

My legs look like that

 

[til<3D]

My legs look like that

I would cut down to 10% bf bc of Summer and then start a clean lean bulk where I would focus on my weak points

Btw your legs are brutal as well

 

[lent vent]

I would cut down to 10% bf bc of Summer and then start a clean lean bulk where I would focus on my weak points

Btw your legs are brutal as well

Im at 11% bf right now.
Thanks , in my opinion my legs are the strongest part of my physique, thats why I dont work them as much as the other parts

 

[jrown]

is bench press w pec fly fine or should I only do one?

 

[til<3D]

Im at 11% bf right now.
Thanks , in my opinion my legs are the strongest part of my physique, thats why I dont work them as much as the other parts

On the pictures you sent or are they old

Yeah your Quads are massive and the hamstring are probably well too but to much body fat

 

[lent vent]

On the pictures you sent or are they old

Yeah your Quads are massive and the hamstring are probably well too but to much body fat

The legs photo are old, I stopped training them a lot because they got too big.
Im like de third photo, thats aprox 11% , on the others i was 12%,11,5%

 

[til<3D]

is bench press w pec fly fine or should I only do one?

I would suggest option 1 but a more stable pressing movement like a good chest press machine or in the smith machine

 

[lent vent]

On the pictures you sent or are they old

Yeah your Quads are massive and the hamstring are probably well too but to much body fat

So overall, what would you rate my physique
For my age, and for general.

 

[til<3D]

The legs photo are old, I stopped training them a lot because they got too big.
Im like de third photo, thats aprox 11% , on the others i was 12%,11,5%

You look more like a solid 15 or 16% tbh

 

[til<3D]

So overall, what would you rate my physique
For my age, and for general.

Age: 9/10 maybe 9,5 if you work on your bf and chest
General: 8/10
Shredded 8-10%: 11/10

 

[lent vent]

You look more like a solid 15 or 16% tbh

Wich bf would you estimate here?

 

[Ruinedbyfaceshape]

mirin effort SBL is good just sounds so fucking cringe out loud i lowkey just copied dorian saraci split im ngl its a little retarded but im doing ULURULR been running it for 6 months already might switch to FB since im getting bored how would you program an FB

 

[lent vent]

Age: 9/10 maybe 9,5 if you work on your bf and chest
General: 8/10
Shredded 8-10%: 11/10

Thanks, my chest just dont grow, it was way smaller before, when I stardew with incline bench it grew a lot

 

[til<3D]

mirin effort SBL is good just sounds so fucking cringe out loud i lowkey just copied dorian saraci split im ngl its a little retarded but im doing ULURULR been running it for 6 months already might switch to FB since im getting bored how would you program an FB

make yourself a list with muscle groups you wanna train get yourself a good exercise for each muscle and do 1-2 sets

Pec Fly 2 Sets
Latpulldown 2 Sets
Upper Back Row 1-2 Sets
Lateral Raise 1-2 Sets
Bicep Curl 1-2 Sets
Tricep Pushdowns 1-2 Sets
Abs 1-2 Sets
Leg Ext 2 Sets
Hamstring Curl 2 Sets


Optional:
Front/ Rear Delt each 1 set
calves 1 Set
Adductor 1-2 Sets
Hip thrusts 1-2 Sets

 

[combatingNorwooding]

Good gpt guide lol

 

[combatingNorwooding]

Your choices are pretty good for the mashines but i wouldn’t go to the gym for 4 sets

Lets take for example day 1
You only do 5 sets to failure

I would do:

Incline press smith 80kg

3 warm ups

30kg x 8 reps

60kg x 4 reps

75kg x 2 reps

Then:

3 failure


Peck deck 80kg

1 warm up

75kg x 2 reps

More of needed

2 failure

Triceps one arm pushdown 40kg

2 warm ups

25kg x 5 reps

35kg x 2 reps

2 failure each arm


JM press 50kg

1 warm up

45kg x 2

1 failure


Lateral raises 15kg

2-3 warm ups

7,5kg x 5

12,5kg x 2

2 failure


Shoulder Press 90 degrees 50kg

1 warm up

45kg

1 failure


Warm ups are not really sets you count
Warm ups:

Light weight and much reps
Mid weight and mid reps
90% of your weight you gonna lift at your top set x 2 reps

Add more warm ups sets if needed

Hahaha

@ce10098 @mikre Look at this retarded and his guide it’s actually dangerous that someone like him can give advices and people will listen

 

[ce10098]

Hahaha

@ce10098 @mikre Look at this retarded and his guide it’s actually dangerous that someone like him can give advices and people will listen

bro said 5 sets to failure

 

[til<3D]

bro said 5 sets to failure

What would you do instead

 

[ce10098]

What would you do instead

less

 

[til<3D]

less

How many sets should I do on a push day then?

 

[Fleez]

This is a comprehensive guide for both beginners and advanced lifters. Everything you'll read here is based on my personal experience as a science-based lifter.

If the term "science-based lifting" already turns you off, feel free to leave now — because this guide is 100% science-based and 100% evidence-driven. No guesswork, no bro-science, no "this worked for me once so it must be universal."

Before we start, I want to make one thing clear: this is very likely the most extensive true guide you'll find on this forum. The goal is not to overwhelm, but to explain things properly — from the ground up — and connect the dots most people never explain.

I'm writing this guide in collaboration with ChatGPT. That's why you won't hear any insults here - unfortunately. My input is written in my native language, and ChatGPT helps translate and structure everything into clear English. The reason is simple:

• I don't feel like writing everything out in German and translating it afterward, and
• writing has never been my strongest skill — clarity and correctness matter more than fancy wording.

What does matter is that the information in this guide is accurate, practical, and backed by real evidence.


Let's get started.

---

PART 1: TRAINING FUNDAMENTALS​

Training – The Foundation of Everything​

Training is by far the most important factor when it comes to building muscle. It's not even close.

Training determines whether you build muscle — or whether nothing happens at all.

You can have perfect nutrition.
You can sleep eight hours every night.
You can take every supplement on the market.

If your training is bad, you will not build muscle.

Nutrition, sleep, and supplements do not build muscle by themselves. They only support the adaptation that is created by training.

---

Muscle Growth: What Actually Builds Muscle​

When it comes to hypertrophy, there is one primary driver: mechanical tension.

Mechanical tension is the stimulus that tells your body: "We need to adapt. We need more muscle."

Things that do NOT directly build muscle:

• metabolic stress
• the pump
• sweating
• soreness
• feeling exhausted after a workout

These can occur during good training, but they are not the cause of muscle growth.

If mechanical tension is not present — meaning sufficiently heavy load, controlled execution, and proximity to failure — hypertrophy will be minimal or nonexistent.

---

Repetitions, Intensity, and Proximity to Failure​

We know from both research and practical experience that the last ~5 repetitions of a set create the majority of the hypertrophy stimulus.

These are the reps where mechanical tension is highest.

That is why, in every program presented in this guide, we will work with:

• 5–8 repetitions per set
• 0–1 RIR (Reps in Reserve)

This means most sets are taken very close to failure, or directly to failure, in a controlled and intentional way.

Low effort does not build muscle. Hard sets do.

---

Progressive Overload – What It Actually Is​

Progressive overload is not optional.

It is the only reliable short-term indicator that you are actually building muscle.

If, under the same conditions:

• same exercise
• same technique
• same range of motion
• same setup
• same nutrition
• same training time

...you are able to move more weight or perform more repetitions, then one thing is clear:

You have built muscle.

Why Progressive Overload Matters​

Muscle growth is not something you can feel from session to session. Visual changes take time, and soreness means nothing.

Progressive overload is different.

It is the only short-term feedback system that tells you your training is working.

If performance goes up under standardized conditions, muscle tissue had to adapt. There is no workaround, no placebo, no "mind-muscle connection" explanation that replaces this.

What Progressive Overload Is NOT​

• It is not chasing a pump
• It is not random PRs with worse form
• It is not ego lifting
• It is not adding volume without progression

Overload only counts if execution stays consistent.

The Importance of a Training Log​

Because of this, we track everything.

You must keep a training log.

For every exercise, you write down:

• the machine or variation used
• the load
• the repetitions performed

If you don't track your lifts, you don't know whether you are progressing — and if you don't know that, you are guessing.

No logbook = no data.
No data = no progress.

How it should look like:

Pull-FB:

Exercise - last Load and reps from first set of last week
Weight x Reps (+ note if necessary)
Weight x Reps (+ note if necessary)

Exercise - last Load and reps from first set of last week
Weight x Reps (+ note if necessary)
Weight x Reps (+ note if necessary)
…

Short-Term vs. Long-Term Indicators​

Long term, you will see changes in your physique.
Short term, progressive overload is the signal.

That's why everything in this guide — split selection, volume, exercise choice — ultimately serves one purpose: making progressive overload possible and repeatable.

---

Progressive Overload in Practice – The Double Progression Method​

Now that we understand why progressive overload matters, we need to understand how to apply it systematically.

We already know we work in the 5–8 rep range at 0–1 RIR. But how do we actually progress from session to session?

The answer is double progression.

How Double Progression Works​

Here's the simple rule:

1. You start with a weight you can perform for 5 clean reps (at 0–1 RIR)
2. Every session, you try to add reps with that same weight
3. Once you reach 8 reps with that weight, you increase the load
4. With the new, heavier weight, you drop back down to 5 reps — and repeat the cycle

Practical Example: Lat Pulldown​

• Week 1: 80 kg × 5 reps
• Week 2: 80 kg × 6 reps
• Week 3: 80 kg × 7 reps
• Week 4: 80 kg × 8 reps → progression threshold reached
• Week 5: 85 kg × 5 reps → weight increased, reps reset

And the cycle repeats.

---

PART 2: PROGRAM DESIGN​

Training Frequency and Split Selection​

Based on the latest scientific evidence, we know that a higher training frequency is superior for hypertrophy.

Hitting a muscle at least twice per week is considered optimal.

The reason is simple: A muscle only grows for roughly 24–48 hours after a sufficient training stimulus. After that window, muscle protein synthesis returns to baseline. If you wait too long before training that muscle again, you are wasting potential growth time.

That is why, throughout this guide, we will generally work with higher frequencies rather than once-per-week "bro splits."

Recommended Training Splits​

The following splits are all solid, evidence-based options and work very well when programmed correctly:

• Upper / Lower
• Push-FB / Pull-FB
• Full Body Every Other Day (FEOD)
• Push Pull Legs

(FB = Full Body)

Other highly effective splits include:

• Anterior / Posterior
• Torso / Limbs (Maybe too much for your arms)
• Full Body 3x per week

All of these splits allow for adequate volume, sufficient intensity, and — most importantly — an appropriate frequency per muscle group.

---

Training Volume per Muscle Group – A Sleep-Based Approach​

When talking about training volume, most people think in weekly sets per muscle group.

In this guide, we will use a more practical and recovery-oriented approach:

Volume will be planned based on sleeps, not weeks.

The key question is not: "How many sets per week do I do?"

The key question is: "How many sleeps do I have to recover before I train that muscle again?"

What Do We Mean by "Sleeps"?​

A "sleep" simply refers to one full night of sleep between two sessions that train the same muscle group.

Examples:

• Upper / Lower / Rest / Upper → 3 sleeps between upper-body sessions
• Full Body Every Other Day (FEOD) → 2 sleeps between full-body sessions
• Push / Pull / Legs → 4 sleeps before the same muscle group is trained again

Recovery capacity — and therefore tolerable volume — scales with the number of sleeps available.

Volume Allocation Based on Sleeps​

Instead of distributing volume across a calendar week, we distribute volume across recovery windows.

General guidelines:

• 2 sleeps → 1–3 sets per muscle group (3 sets maximum)
• 3 sleeps → 2–5 sets per muscle group (5 sets maximum)
• 4 sleeps → up to ~6 sets per muscle group

This volume refers to hard, effective sets performed in the 5–8 rep range at 0–1 RIR.

More volume than this does not automatically mean more growth — it often just means more fatigue and worse performance in the next session.

Why This Works​

Muscle growth happens during recovery. The more recovery time you have, the more high-quality volume you can tolerate and benefit from.

Planning volume around sleeps:

• respects individual recovery
• works across different splits
• prevents unnecessary junk volume

This approach allows us to build programs that are aggressive enough to grow, but conservative enough to recover from.

---

Muscle Prioritization – How to Actually Focus on a Muscle Group​

There is a common misconception: People think that certain splits "prioritize" certain muscle groups.

This is not true.

No split inherently prioritizes anything. A Push/Pull/Legs split does not prioritize chest. An Upper/Lower split does not prioritize back. A Full Body split does not prioritize legs.

The split does not determine priority. Exercise order does.

How to Prioritize a Muscle Group​

If you want to prioritize a muscle group, the method is extremely simple:

Train it first.

When you are fresh — not pre-fatigued, not systemically tired — you will:

• lift heavier weights
• perform more quality reps
• execute with better technique
• recover better between sets

That is where the best stimulus happens.

Practical Example: Prioritizing Shoulders​

Let's say you want to focus on shoulder development.

Instead of this order:

1. Chest Press
2. Pec Deck
3. Lateral Raises
4. Triceps Pushdowns

You do this:

1. Lateral Raises ← trained first, when fresh
2. Chest Press
3. Pec Deck
4. Triceps Pushdowns

Same split. Same exercises. Different priority.

Why This Works​

Your performance capacity is highest at the start of a session. By the time you reach the last exercises, you are:

• neurally fatigued
• systemically tired
• less focused

The muscles you train first get the best version of you. The muscles you train last get what's left.

That is prioritization.

---

If You Hate Training Legs (Reality Check Included)​

Ideally, you should train everything.

That said, if you really don't want to train legs properly, there are still workable (though suboptimal) options, such as:

• Upper Every Other Day
• Push / Pull (with minimal or no leg training)

These setups can still produce upper-body progress, but understand this clearly:

Avoiding leg training is a choice, not an optimal strategy.

---

PART 3: EXERCISE SELECTION​

Exercise Selection – Avoiding Redundancy and Wasted Time​

One of the biggest mistakes people make when designing training programs is exercise redundancy.

You see it all the time:

• Three different curl variations in the same session
• Four different rowing movements for the upper back
• Multiple chest presses from slightly different angles

This is not "hitting the muscle from all angles."
This is wasting time and recovery capacity.

How to Choose Exercises Properly​

The method is simple:

1. Identify the primary action of the muscle you want to train
2. Choose one exercise that performs that action
3. Do not add more exercises that perform the exact same action

That's it.

Practical Example: Chest Training​

The primary action of the chest is horizontal adduction of the humerus (bringing the upper arm across the body).

If you do:

• Pec Deck / Butterfly Machine

You are already training horizontal adduction.

Now, if you also add:

• Dumbbell Bench Press

You are performing the exact same movement pattern again — horizontal adduction of the humerus.

This is redundant.

Both exercises train the same muscle action. The second one does not add anything meaningful. It just costs you time and recovery capacity.

What Redundancy Looks Like​

Here are common examples of redundant exercise pairings:

Biceps:

• Preacher Curls + Alternating Dumbbell Curls
  → Both perform elbow flexion with supination — redundant

Triceps:

• Rope Pushdowns + Straight-Bar Pushdowns
  → Both perform elbow extension — redundant

Chest:

• Butterfly + Dumbbell Bench Press
  → Both perform horizontal adduction — redundant

Upper Back:

• T-Bar Row + Seated Cable Row + Chest-Supported Row
  → All perform horizontal pulling / scapular retraction — redundant

Why This Matters​

Every exercise you do:

• costs energy
• creates fatigue
• requires recovery

If two exercises train the same muscle action, the second one is not giving you more growth — it's just giving you more fatigue.

Instead of wasting that time and recovery on redundant work, you could:

• train another muscle group
• add more rest between sets for better performance
• leave the gym earlier and recover better

How to Check for Redundancy​

Ask yourself two questions:

1. What is the primary muscle action of this exercise?
2. Am I already doing another exercise with the exact same action?

If yes → remove one of them.

The Right Way: One Exercise Per Muscle Action​

For chest:

• One exercise for horizontal adduction (Pec Deck, Chest Press, etc.)
  → Done. Move on.

For biceps:

• One exercise for elbow flexion (Preacher Curls, Cable Curls, etc.)
  → Done. Move on.

For triceps:

• One exercise for elbow extension (Pushdowns, Overhead Extensions, etc.)
  → Done. Move on.

This approach:

• saves time
• saves recovery capacity
• keeps training focused and efficient
• allows you to train more muscle groups or rest more between quality sets

---

When Two Exercises for the Same Muscle ARE Justified​

Now, you might notice something in the example programs:

We do both Chest Press and Butterfly for chest.
We do both Squats (or Hack Squat) and Leg Extensions for quads.

Wait — didn't we just say redundancy is bad?

This is NOT redundancy. Here's why:

Isolation vs. Compound Movements​

There is a critical difference between:

Isolation exercises — where only one joint moves, and the target muscle works alone

Compound exercises — where multiple joints move, and multiple muscles work together

Example 1: Chest​

Butterfly / Pec Deck → Pure isolation

• Only the shoulder joint moves (horizontal adduction)
• The chest works almost completely alone
• Triceps are not involved

Chest Press → Compound movement

• Both shoulder AND elbow joints move
• Chest performs horizontal adduction
• Triceps perform elbow extension
• Both muscles work together

These two exercises are not redundant because:

• The Butterfly ensures the chest is fully stimulated in isolation
• The Chest Press allows you to load the movement pattern more heavily with triceps assistance

Together, they ensure you cover all muscle fibers and maximize mechanical tension on the chest.

Example 2: Quads​

Leg Extensions → Pure isolation

• Only the knee joint moves (knee extension)
• Quads work alone

Hack Squat / Belt Squat → Compound movement

• Both knee AND hip joints move
• Quads perform knee extension
• Glutes perform hip extension
• Both muscles work together

Again, not redundant:

• Leg Extensions isolate the quads completely
• Squats allow heavier loading through a multi-joint pattern

This combination ensures complete quad development.

The Rule: One Isolation + One Compound = Optimal Coverage​

For most major muscle groups, the ideal setup is:

One isolation exercise (to fully isolate the target muscle)
+
One compound exercise (to load the movement pattern more heavily)

This ensures:

• all muscle fibers are reached
• mechanical tension is maximized
• you're not leaving growth on the table

What IS Still Redundant​

The following would still be redundant:

• Pec Deck + Dumbbell Flyes → both are isolation for horizontal adduction
• Chest Press + Incline Press → both are compounds with the same joint actions
• Leg Extensions + Sissy Squats → both are knee extension isolations
• Preacher Curls + Cable Curls → both are elbow flexion isolations

These pairings don't add anything meaningful — they just add fatigue.

Conclusion​

Two exercises for the same muscle group are justified when:

• One is an isolation movement
• One is a compound movement

This is not redundancy — this is smart programming.

But doing multiple isolations or multiple compounds for the same muscle action? That's still wasted time and recovery.

---

Exercise Consistency – Why You Should NOT Change Exercises Every Week​

We already established that mechanical tension is the primary driver of hypertrophy.

But here's what most people don't understand:

To maximize mechanical tension, you need optimal execution.
To develop optimal execution, you need neurological adaptation.
Neurological adaptation takes time — and consistency.

The Problem with Constantly Changing Exercises​

Let's say you train biceps like this:

• Week 1: Preacher Curls
• Week 2: Incline Dumbbell Curls
• Week 3: Cable Curls
• Week 4: Hammer Curls

You are constantly forcing your nervous system to re-learn movement patterns.

Every time you switch exercises, your body has to:

• coordinate new motor units
• learn the range of motion
• stabilize in a new way
• figure out how to optimally recruit the target muscle

While this is happening, you cannot express maximum mechanical tension on the target muscle — because you are still learning the lift.

The Better Approach: Stick with Exercises for Entire Training Blocks​

Now compare that to someone who does:

• Week 1–20: Preacher Curls (entire mesocycle)

This lifter:

• becomes more efficient at the movement every session
• recruits the biceps more effectively over time
• progressively overloads the same exercise with better execution
• maximizes mechanical tension because technique is no longer a limiting factor

This is why consistency wins.

When Should You Change Exercises?​

There are only a few valid reasons to switch an exercise:

1. You've "mixed out" the exercise — meaning you can no longer progress on it effectively
2. The exercise causes pain or discomfort that doesn't resolve
3. Equipment is no longer available

Otherwise? Keep the exercise.

Why "Muscle Confusion" Is Nonsense​

Your muscles don't get "confused."
Your muscles respond to mechanical tension.

If you want to maximize tension, you need to maximize performance — and that requires neurological efficiency, which only comes from repetition.

Changing exercises every week is not "keeping the muscle guessing."
It's keeping your nervous system guessing — and that limits your progress.

---

How to Build the Perfect Training Plan​

At this point, we already know the key variables:

• multiple splits work very well (as listed earlier)
• recovery limits our maximum usable volume
• we work in a fixed rep range (5–8 reps at 0–1 RIR)

Now the question becomes: How do we actually build a training plan step by step?

Let's walk through a practical example using a Full-Body Push / Full-Body Pull setup.

Step 1: Identify the Muscle Groups for Each Day​

Before choosing exercises, we first define which muscle groups are trained on each day.

Full-Body Push Day – Involved Muscle Groups

On a push-focused full-body day, we train:

• Chest
• Shoulders
• Triceps
• Quads
• Glutes
• Adductors

Once the muscle groups are defined, exercise selection becomes straightforward.

Step 2: Choose Appropriate Exercises Based on Availability and Stability​

We now select exercises that:

• are available in most gyms
• allow high mechanical tension
• are stable and easy to progressively overload

Chest

• Pec Deck / Butterfly
• Chest Press (machine)

These are stable, easy to load, and excellent for controlled hypertrophy work.

Shoulders

• Lateral Raise Machine
• Cable lateral raises
• Dumbbell lateral raises
• Shoulder Press 90*

Any variation works as long as it allows strict execution and progression.

Triceps

• Cable Triceps Pushdowns

A simple isolation exercise that is easy to load and recover from.

Quads

We use both:

• Quad isolation: Leg Extensions
• Quad compound: Belt Squat or Hack Squat

These are among the most stable and quad-dominant lower-body exercises available.

Glutes

• Hip Thrusts

One of the best options for loading the glutes through a large range of motion.

Adductors

• Adductor Machine

Simple, effective, and often neglected — but important for balanced leg development.

---

Full-Body Pull Day – Involved Muscle Groups

On a pull-focused full-body day, we train:

• Latissimus
• Upper Back / Trapezius
• Rear Delts
• Biceps
• Hamstrings
• Calves
• Abs

Step 3: Exercise Selection for Pull Day​

Latissimus

We use:

• Vertical pull: Lat Pulldown or Neutral-Grip Pulldown
• Sagittal-plane movement: Single-arm cable row or Cable pullover

This combination covers both shoulder extension and elbow flexion patterns.

Upper Back / Traps

• Upper-back rowing movement: T-Bar Row or Wide-grip machine row

The goal is horizontal pulling with an emphasis on scapular retraction.

Rear Delts

• Reverse Pec Deck
• Cable rear-delt flyes

Simple isolation with high stimulus and low systemic fatigue.

Biceps

• Preacher Curls

Stable, easy to overload, and very consistent in execution.

Hamstrings

• Lying Leg Curl

Calves

• Standing Calf Raise Machine

Straight-leg position to emphasize the gastrocnemius.

Abs

• Ab Machine with spinal flexion

Any ab exercise works as long as:

• it allows progressive overload
• it includes active spinal flexion

Why This Approach Works​

We:

• start with the split
• define muscle groups
• choose stable, overload-friendly exercises
• avoid unnecessary complexity
• avoid redundant exercises

This creates a plan that is:

• easy to recover from
• easy to progress
• highly repeatable
• fully aligned with a science-based approach

Notice what we did NOT do:

• Add three different chest press variations
• Include four different rowing movements
• Program multiple redundant curl variations

Every exercise serves a clear, distinct purpose. No wasted effort.

Complete Full-Body Push / Full-Body Pull Training Program

This is a 4-day training split that alternates between two Push and two Pull variations:

Weekly Schedule:

• Day 1: FB Push A
• Day 2: FB Pull A
• Day 3: Rest
• Day 4: FB Push B
• Day 5: FB Pull B
• Day 6: Rest
• Repeat

---

View attachment 4536121View attachment 4536122

View attachment 4536124View attachment 4536123


Program Notes:

• These are movement patterns, not specific exercises. Choose the actual exercises based on what equipment is available in your gym. For example, "Chest Press Variation" could be a machine chest press, barbell bench press, or dumbbell press — whatever you have access to and can progressively overload consistently.
• Each session totals exactly 15 working sets
• All sets are performed at 1-0 RIR (very close to or at failure)
• Rest periods are standardized at 3 minutes (adjust based on heart rate recovery)
• Exercise variations (A vs B) allow for continued neurological adaptation while preventing excessive CNS fatigue
• This structure provides 2 training sessions per muscle group per week with adequate recovery (2 sleeps between sessions)
• Once you select a specific exercise for each movement pattern, stick with it for the entire training block (12-20 weeks) to maximize progressive overload
• Beginner modification: If you are new to resistance training (less than 2-3 months of consistent training experience), start with 2-3 RIR instead of 1-0 RIR for the first 4-8 weeks. This allows you to learn proper exercise execution and minimize injury risk while your body adapts to hard training. Once your technique is solid and consistent, gradually progress to 1-0 RIR.

---

PART 4: EXECUTION & TECHNIQUE​

Warm-Up Sets – More Than Just Injury Prevention​

Warm-up sets are not just about avoiding injury.
They can directly improve your performance on your working sets.

Many people experience this: They perform more reps on their second working set than on their first.

Why? Because their warm-up was inadequate.

How Many Warm-Up Sets?​

The answer depends on three factors:

1. Is the muscle already warm? (e.g., if you already did another exercise for that muscle)
2. Do you have any pain or discomfort? (you may need extra warm-up sets to prepare the joint)
3. How heavy is your working weight? (heavier loads require more warm-up)

In general, 1–3 warm-up sets are recommended.

Post-Activation Potentiation (PAP) – Unlocking Peak Performance​

To achieve maximum performance on your working sets, we want to trigger something called Post-Activation Potentiation (PAP).

PAP is a short-term increase in muscle performance that occurs when your nervous system and muscles are primed for maximum effort.

In simple terms: Your body becomes "ready" to produce maximum force.

How to Achieve PAP​

The method is straightforward:

1. Perform 1–2 reps at 85–95% of your working weight
2. Rest for 30–60 seconds (until you feel ready)
3. Perform your working set

This "priming" set activates your nervous system without creating fatigue, allowing you to express full strength on your working set.

Practical Example: Bench Press with 90 kg Working Weight​

Let's say your working weight is 90 kg for 5–8 reps.

Your warm-up progression might look like this:

• Warm-up Set 1: 50 kg × 7 reps
• Warm-up Set 2: 70 kg × 4 reps
• PAP Set: 90 kg × 1–2 reps
• Rest: 30–60 seconds (until you feel ready)
• Working Set 1: 90 kg × 5–8 reps (at 0–1 RIR)

Why This Works​

The PAP set:

• activates high-threshold motor units
• prepares your nervous system for maximum effort
• does not create significant fatigue (only 1–2 reps)

The result? You perform better on your first working set — and avoid the common problem of having a "wasted" first set.

Key Takeaway​

Warm-up sets are not filler work.
Done correctly, they directly improve your working-set performance.

Use PAP, and make sure your first working set is your best working set.

---

Form & Technique – The Standardization Rule​

Your technique must look identical to the week before.

This is not negotiable.

If your form changes, your progressive overload data becomes meaningless. You're not comparing apples to apples anymore.

How to Ensure Consistency​

The best method: film every set.

Use a phone on a tripod and record each working set from the same angle every session. Compare your execution to the previous week.

If the form is the same and the load or reps increased → you progressed.
If the form deteriorated → the progression doesn't count.

Standardization is everything.

---

Tempo – How Fast Should You Lift?​

Concentric (lifting phase): As fast as possible.
Lift explosively. Move the weight with maximum intent.

Eccentric (lowering phase): Controlled, but not exaggerated.
Lower the weight at a speed where, if someone yelled "STOP!", you could actually stop the movement.

This means:

• Don't drop the weight uncontrolled
• But also don't take 5–10 seconds on the eccentric

Eccentric work does not need to be slow to be effective. Control is what matters — not artificially prolonged time under tension.

---

Range of Motion (ROM) – Standardization Over Extremes​

Full range of motion is important — but not for the reason most people think.

ROM matters for standardization.

You need to use the same range of motion every session so that your progressive overload is valid.

Example: Lat Pulldown​

Biomechanically, the latissimus has its best leverage at around 90 degrees of shoulder extension. You could, in theory, stop there and still get an excellent stimulus.

You don't necessarily need to pull all the way down until your upper arm touches your torso — but if that's the ROM you use, then you must use that same ROM every session.

The point:​

Extreme full ROM is not required for hypertrophy. What is required is consistent ROM so you can track progress accurately.

Pick a ROM that:

• feels stable
• allows you to load the movement well
• can be repeated identically week after week

Then stick to it.

---

Rest Times Between Sets – Listen to Your Body​

Rest times are not arbitrary numbers.

The rule is simple: Rest until your heart rate returns to baseline.

After a hard set of squats at 0 RIR, you will need significant rest — potentially 3–5 minutes or more — because the systemic demand is high.

After a set of preacher curls, you might only need 1–2 minutes, because the systemic fatigue is much lower.

The key: Don't rush. Wait until your breathing has normalized and your heart rate is back to resting levels.

Unilateral Training (Single-Arm/Leg Work)​

For single-arm or single-leg exercises, do not go directly from right to left.

Instead:

• Perform the right side
• Rest until your heart rate normalizes
• Perform the left side
• Rest again before the next set

This ensures each side gets maximum performance, not just whatever you have left.

---

Training to Failure – Always 0–1 RIR​

Yes. Every working set should be performed at 0–1 RIR.

There are no exceptions.

This is not "sometimes" or "on certain exercises." This is the standard for every working set in this system.

If you're not training close to failure, you're not creating sufficient mechanical tension — and that means suboptimal growth.

Hard sets build muscle. Easy sets do not.

---

Lifting Straps – Stop Being Stupid About Them​

Let's address something that needs to be said clearly:

You are not tougher, stronger, or "more hardcore" because you refuse to use lifting straps.

You are just limiting your back development for no good reason.

The Simple Truth About Building a Big Back​

If you want to build a thick, well-developed back, use lifting straps.

Why?

Because your grip will fail long before your back is fully stimulated.

When you're doing heavy rows, pulldowns, or deadlifts without straps:

• Your forearms give out first
• Your back never reaches true mechanical failure
• You leave growth on the table

"But I Want to Train My Grip Strength!"​

Two responses to this:

First: Even when using straps, you are still training your grip.
You still have to hold the bar. The straps just prevent your grip from being the limiting factor.

Second: If you actually want to train grip strength, then train it directly.

Don't handicap your back training just to get suboptimal grip work.

Add dedicated grip training:

• Farmer's walks
• Dead hangs
• Grip trainers

Train grip when it makes sense — not when it limits your back growth.

The Reality​

Using straps is not "cheating."
It's smart training.

The goal of back training is to build your back — not to test your forearms.

If your grip fails at rep 5, but your lats could have done 8 reps, you just wasted a set.

Straps allow you to:

• push your back to true failure
• maximize mechanical tension on the target muscle
• progress more effectively

When to Use Straps​

Use straps on:

• Heavy rowing movements (T-Bar Rows, Cable Rows, etc.)
• Lat Pulldowns (especially with heavier loads)
• Deadlifts or RDLs (if grip is limiting)

Don't use straps on:

• Exercises where grip isn't the issue (leg work, pressing, etc.)

---

PART 5: PROGRESSION & TROUBLESHOOTING​

Double Progression – Does It Apply to All Sets?​

Double progression applies primarily to the first set.

If you progress on the first set with identical execution, the second and third sets will also progress naturally over time.

You don't need to track progression separately for every set. Focus on the first set, and the rest will follow.

---

Weight Jumps – Adjust Based on the Exercise​

The size of weight increases depends on the exercise:

Large compound movements (Squats, Leg Press, etc.):
Increase by 5–10 kg when you hit 8 reps

Upper-body compounds (Chest Press, Rows, etc.):
Increase by 2.5–5 kg

Isolation movements (Curls, Lateral Raises, etc.):
Increase by 1–2.5 kg

The heavier the exercise and the more muscle mass involved, the larger the jumps can be.

---

What to Do When You Stop Progressing​

If you hit a plateau and can no longer add reps or weight, follow this checklist in order:

1. Check your execution
   Is your form still identical to previous weeks? Film yourself and compare.
   
   
2. Improve recovery
   Are you sleeping enough? Managing stress?
   
   
3. Improve nutrition
   Are you eating enough? Getting adequate protein?
   
   
4. Improve hydration
   Are you drinking enough water throughout the day?
   
   
5. Improve your warm-up
   Are you using PAP effectively? Are you adequately prepared?
   
   
6. Reduce grinding and "ego" reps
   Are you pushing so hard that you're frying your CNS?
   
   
7. Only then: Adjust volume
   If everything else is dialed in and you still can't progress, try reducing volume for that muscle group by one set for 2 weeks and reassess.

Most of the time, the issue is not the program — it's execution, recovery, or nutrition.

---

Deload Phases – Not Necessary with Proper Volume Management​

If you are managing volume intelligently using the sleep-based approach outlined earlier, deloads are generally unnecessary.

Why?

Because you are already adjusting volume based on recovery windows. You're not accumulating excessive fatigue in the first place.

Most people need deloads because they program too much volume and don't respect recovery. If you avoid that mistake, planned deloads become redundant.

---

PART 6: ADDITIONAL CONSIDERATIONS​

Cardio – Should You Do It?​

Yes. Absolutely.

There are two main reasons to do cardiovascular training:

Reason 1: Health and Longevity​

Regular Zone 2 cardio training can increase your lifespan by approximately 17%.

This is not optional if you care about long-term health.

Reason 2: Preventing Cardiovascular Failure During Training​

When you perform exercises like squats or leg presses, you need adequate cardiovascular capacity.

If your conditioning is poor, you will experience cardiovascular failure before muscular failure.

This means:

• Your legs could do more reps
• But your heart and lungs give out first
• You never reach true mechanical failure on the target muscle

Cardio ensures that when you fail on a set, it's because your muscles failed — not because you ran out of breath.

How Much Cardio?​

Minimum: 60 minutes per week

You can structure this however it fits your schedule:

• 1 session of 60 minutes
• 6 sessions of 10 minutes (e.g., every morning)
• 2 sessions of 30 minutes
• Any combination that totals at least 60 minutes

In a Bulk: Stick to the minimum (60 minutes/week)
In a Cut: You can increase as needed — there is no upper limit

When Should You Do Cardio?​

Timing is generally flexible, with one exception:

Do NOT do cardio immediately before your resistance training.

If you do cardio right before lifting, you will:

• be pre-fatigued
• perform worse on your working sets
• compromise your progressive overload

Better options:

• On rest days (ideal)
• In the morning, with resistance training in the afternoon/evening
• After your resistance training (if you must do it on the same day)

Zone 2 cardio is already demanding, so plan accordingly.

Does Cardio Hurt Your Gains?​

Short answer: Not really — and it may even help.

The concern: Cardio creates systemic fatigue, which could theoretically interfere with muscle growth.

The reality: Cardio and resistance training use different muscle fiber types:

• Resistance training (5–8 reps at 0–1 RIR): Type 2 muscle fibers
• Zone 2 cardio: Type 1 muscle fibers

Because they target different fiber types, cardio does not directly interfere with hypertrophy adaptations.

In fact, improved cardiovascular capacity supports better training performance — which ultimately supports better gains.

---

Mind-Muscle Connection – Does It Matter?​

No. Mind-muscle connection is not important for hypertrophy in this system.

Why?

Because we train in the 5–8 rep range at 0–1 RIR, lactate does not accumulate in the muscle during the set.

This means:

• You won't feel a "burn"
• You won't feel a strong pump
• You won't have a clear sensation that you're "hitting the muscle"

And that's fine. Mechanical tension — not "feeling" — is what drives growth.

Optional Test:​

If you're unsure whether you're targeting the right muscle, you can occasionally do a high-rep "feel" session (15–20 reps) to get feedback from the pump and burn.

This can help you confirm that your setup and execution are correct. But this is diagnostic, not your regular training approach.

---

Beginners vs. Advanced Lifters – Is There a Difference?​

Not really. The core principles remain the same.

One potential difference:

Advanced lifters may benefit from including slightly more isolation exercises in their programs.

However: Even beginners should use plenty of isolation exercises.

Why?

Isolation exercises allow you to recruit more motor units specifically for the target muscle, without interference from synergists or stabilizers.

This makes them highly effective for hypertrophy — regardless of training experience.

---

holy cow thats good

 

[Datto29]

 

[tittenoderarsch?]

This is a comprehensive guide for both beginners and advanced lifters. Everything you'll read here is based on my personal experience as a science-based lifter.

If the term "science-based lifting" already turns you off, feel free to leave now — because this guide is 100% science-based and 100% evidence-driven. No guesswork, no bro-science, no "this worked for me once so it must be universal."

Before we start, I want to make one thing clear: this is very likely the most extensive true guide you'll find on this forum. The goal is not to overwhelm, but to explain things properly — from the ground up — and connect the dots most people never explain.

I'm writing this guide in collaboration with ChatGPT. That's why you won't hear any insults here - unfortunately. My input is written in my native language, and ChatGPT helps translate and structure everything into clear English. The reason is simple:

• I don't feel like writing everything out in German and translating it afterward, and
• writing has never been my strongest skill — clarity and correctness matter more than fancy wording.

What does matter is that the information in this guide is accurate, practical, and backed by real evidence.


Let's get started.

---

PART 1: TRAINING FUNDAMENTALS​

Training – The Foundation of Everything​

Training is by far the most important factor when it comes to building muscle. It's not even close.

Training determines whether you build muscle — or whether nothing happens at all.

You can have perfect nutrition.
You can sleep eight hours every night.
You can take every supplement on the market.

If your training is bad, you will not build muscle.

Nutrition, sleep, and supplements do not build muscle by themselves. They only support the adaptation that is created by training.

---

Muscle Growth: What Actually Builds Muscle​

When it comes to hypertrophy, there is one primary driver: mechanical tension.

Mechanical tension is the stimulus that tells your body: "We need to adapt. We need more muscle."

Things that do NOT directly build muscle:

• metabolic stress
• the pump
• sweating
• soreness
• feeling exhausted after a workout

These can occur during good training, but they are not the cause of muscle growth.

If mechanical tension is not present — meaning sufficiently heavy load, controlled execution, and proximity to failure — hypertrophy will be minimal or nonexistent.

---

Repetitions, Intensity, and Proximity to Failure​

We know from both research and practical experience that the last ~5 repetitions of a set create the majority of the hypertrophy stimulus.

These are the reps where mechanical tension is highest.

That is why, in every program presented in this guide, we will work with:

• 5–8 repetitions per set
• 0–1 RIR (Reps in Reserve)

This means most sets are taken very close to failure, or directly to failure, in a controlled and intentional way.

Low effort does not build muscle. Hard sets do.

---

Progressive Overload – What It Actually Is​

Progressive overload is not optional.

It is the only reliable short-term indicator that you are actually building muscle.

If, under the same conditions:

• same exercise
• same technique
• same range of motion
• same setup
• same nutrition
• same training time

...you are able to move more weight or perform more repetitions, then one thing is clear:

You have built muscle.

Why Progressive Overload Matters​

Muscle growth is not something you can feel from session to session. Visual changes take time, and soreness means nothing.

Progressive overload is different.

It is the only short-term feedback system that tells you your training is working.

If performance goes up under standardized conditions, muscle tissue had to adapt. There is no workaround, no placebo, no "mind-muscle connection" explanation that replaces this.

What Progressive Overload Is NOT​

• It is not chasing a pump
• It is not random PRs with worse form
• It is not ego lifting
• It is not adding volume without progression

Overload only counts if execution stays consistent.

The Importance of a Training Log​

Because of this, we track everything.

You must keep a training log.

For every exercise, you write down:

• the machine or variation used
• the load
• the repetitions performed

If you don't track your lifts, you don't know whether you are progressing — and if you don't know that, you are guessing.

No logbook = no data.
No data = no progress.

How it should look like:

Pull-FB:

Exercise - last Load and reps from first set of last week
Weight x Reps (+ note if necessary)
Weight x Reps (+ note if necessary)

Exercise - last Load and reps from first set of last week
Weight x Reps (+ note if necessary)
Weight x Reps (+ note if necessary)
…

Short-Term vs. Long-Term Indicators​

Long term, you will see changes in your physique.
Short term, progressive overload is the signal.

That's why everything in this guide — split selection, volume, exercise choice — ultimately serves one purpose: making progressive overload possible and repeatable.

---

Progressive Overload in Practice – The Double Progression Method​

Now that we understand why progressive overload matters, we need to understand how to apply it systematically.

We already know we work in the 5–8 rep range at 0–1 RIR. But how do we actually progress from session to session?

The answer is double progression.

How Double Progression Works​

Here's the simple rule:

1. You start with a weight you can perform for 5 clean reps (at 0–1 RIR)
2. Every session, you try to add reps with that same weight
3. Once you reach 8 reps with that weight, you increase the load
4. With the new, heavier weight, you drop back down to 5 reps — and repeat the cycle

Practical Example: Lat Pulldown​

• Week 1: 80 kg × 5 reps
• Week 2: 80 kg × 6 reps
• Week 3: 80 kg × 7 reps
• Week 4: 80 kg × 8 reps → progression threshold reached
• Week 5: 85 kg × 5 reps → weight increased, reps reset

And the cycle repeats.

---

PART 2: PROGRAM DESIGN​

Training Frequency and Split Selection​

Based on the latest scientific evidence, we know that a higher training frequency is superior for hypertrophy.

Hitting a muscle at least twice per week is considered optimal.

The reason is simple: A muscle only grows for roughly 24–48 hours after a sufficient training stimulus. After that window, muscle protein synthesis returns to baseline. If you wait too long before training that muscle again, you are wasting potential growth time.

That is why, throughout this guide, we will generally work with higher frequencies rather than once-per-week "bro splits."

Recommended Training Splits​

The following splits are all solid, evidence-based options and work very well when programmed correctly:

• Upper / Lower
• Push-FB / Pull-FB
• Full Body Every Other Day (FEOD)
• Push Pull Legs

(FB = Full Body)

Other highly effective splits include:

• Anterior / Posterior
• Torso / Limbs (Maybe too much for your arms)
• Full Body 3x per week

All of these splits allow for adequate volume, sufficient intensity, and — most importantly — an appropriate frequency per muscle group.

---

Training Volume per Muscle Group – A Sleep-Based Approach​

When talking about training volume, most people think in weekly sets per muscle group.

In this guide, we will use a more practical and recovery-oriented approach:

Volume will be planned based on sleeps, not weeks.

The key question is not: "How many sets per week do I do?"

The key question is: "How many sleeps do I have to recover before I train that muscle again?"

What Do We Mean by "Sleeps"?​

A "sleep" simply refers to one full night of sleep between two sessions that train the same muscle group.

Examples:

• Upper / Lower / Rest / Upper → 3 sleeps between upper-body sessions
• Full Body Every Other Day (FEOD) → 2 sleeps between full-body sessions
• Push / Pull / Legs → 4 sleeps before the same muscle group is trained again

Recovery capacity — and therefore tolerable volume — scales with the number of sleeps available.

Volume Allocation Based on Sleeps​

Instead of distributing volume across a calendar week, we distribute volume across recovery windows.

General guidelines:

• 2 sleeps → 1–3 sets per muscle group (3 sets maximum)
• 3 sleeps → 2–5 sets per muscle group (5 sets maximum)
• 4 sleeps → up to ~6 sets per muscle group

This volume refers to hard, effective sets performed in the 5–8 rep range at 0–1 RIR.

More volume than this does not automatically mean more growth — it often just means more fatigue and worse performance in the next session.

Why This Works​

Muscle growth happens during recovery. The more recovery time you have, the more high-quality volume you can tolerate and benefit from.

Planning volume around sleeps:

• respects individual recovery
• works across different splits
• prevents unnecessary junk volume

This approach allows us to build programs that are aggressive enough to grow, but conservative enough to recover from.

---

Muscle Prioritization – How to Actually Focus on a Muscle Group​

There is a common misconception: People think that certain splits "prioritize" certain muscle groups.

This is not true.

No split inherently prioritizes anything. A Push/Pull/Legs split does not prioritize chest. An Upper/Lower split does not prioritize back. A Full Body split does not prioritize legs.

The split does not determine priority. Exercise order does.

How to Prioritize a Muscle Group​

If you want to prioritize a muscle group, the method is extremely simple:

Train it first.

When you are fresh — not pre-fatigued, not systemically tired — you will:

• lift heavier weights
• perform more quality reps
• execute with better technique
• recover better between sets

That is where the best stimulus happens.

Practical Example: Prioritizing Shoulders​

Let's say you want to focus on shoulder development.

Instead of this order:

1. Chest Press
2. Pec Deck
3. Lateral Raises
4. Triceps Pushdowns

You do this:

1. Lateral Raises ← trained first, when fresh
2. Chest Press
3. Pec Deck
4. Triceps Pushdowns

Same split. Same exercises. Different priority.

Why This Works​

Your performance capacity is highest at the start of a session. By the time you reach the last exercises, you are:

• neurally fatigued
• systemically tired
• less focused

The muscles you train first get the best version of you. The muscles you train last get what's left.

That is prioritization.

---

If You Hate Training Legs (Reality Check Included)​

Ideally, you should train everything.

That said, if you really don't want to train legs properly, there are still workable (though suboptimal) options, such as:

• Upper Every Other Day
• Push / Pull (with minimal or no leg training)

These setups can still produce upper-body progress, but understand this clearly:

Avoiding leg training is a choice, not an optimal strategy.

---

PART 3: EXERCISE SELECTION​

Exercise Selection – Avoiding Redundancy and Wasted Time​

One of the biggest mistakes people make when designing training programs is exercise redundancy.

You see it all the time:

• Three different curl variations in the same session
• Four different rowing movements for the upper back
• Multiple chest presses from slightly different angles

This is not "hitting the muscle from all angles."
This is wasting time and recovery capacity.

How to Choose Exercises Properly​

The method is simple:

1. Identify the primary action of the muscle you want to train
2. Choose one exercise that performs that action
3. Do not add more exercises that perform the exact same action

That's it.

Practical Example: Chest Training​

The primary action of the chest is horizontal adduction of the humerus (bringing the upper arm across the body).

If you do:

• Pec Deck / Butterfly Machine

You are already training horizontal adduction.

Now, if you also add:

• Dumbbell Bench Press

You are performing the exact same movement pattern again — horizontal adduction of the humerus.

This is redundant.

Both exercises train the same muscle action. The second one does not add anything meaningful. It just costs you time and recovery capacity.

What Redundancy Looks Like​

Here are common examples of redundant exercise pairings:

Biceps:

• Preacher Curls + Alternating Dumbbell Curls
  → Both perform elbow flexion with supination — redundant

Triceps:

• Rope Pushdowns + Straight-Bar Pushdowns
  → Both perform elbow extension — redundant

Chest:

• Butterfly + Dumbbell Bench Press
  → Both perform horizontal adduction — redundant

Upper Back:

• T-Bar Row + Seated Cable Row + Chest-Supported Row
  → All perform horizontal pulling / scapular retraction — redundant

Why This Matters​

Every exercise you do:

• costs energy
• creates fatigue
• requires recovery

If two exercises train the same muscle action, the second one is not giving you more growth — it's just giving you more fatigue.

Instead of wasting that time and recovery on redundant work, you could:

• train another muscle group
• add more rest between sets for better performance
• leave the gym earlier and recover better

How to Check for Redundancy​

Ask yourself two questions:

1. What is the primary muscle action of this exercise?
2. Am I already doing another exercise with the exact same action?

If yes → remove one of them.

The Right Way: One Exercise Per Muscle Action​

For chest:

• One exercise for horizontal adduction (Pec Deck, Chest Press, etc.)
  → Done. Move on.

For biceps:

• One exercise for elbow flexion (Preacher Curls, Cable Curls, etc.)
  → Done. Move on.

For triceps:

• One exercise for elbow extension (Pushdowns, Overhead Extensions, etc.)
  → Done. Move on.

This approach:

• saves time
• saves recovery capacity
• keeps training focused and efficient
• allows you to train more muscle groups or rest more between quality sets

---

When Two Exercises for the Same Muscle ARE Justified​

Now, you might notice something in the example programs:

We do both Chest Press and Butterfly for chest.
We do both Squats (or Hack Squat) and Leg Extensions for quads.

Wait — didn't we just say redundancy is bad?

This is NOT redundancy. Here's why:

Isolation vs. Compound Movements​

There is a critical difference between:

Isolation exercises — where only one joint moves, and the target muscle works alone

Compound exercises — where multiple joints move, and multiple muscles work together

Example 1: Chest​

Butterfly / Pec Deck → Pure isolation

• Only the shoulder joint moves (horizontal adduction)
• The chest works almost completely alone
• Triceps are not involved

Chest Press → Compound movement

• Both shoulder AND elbow joints move
• Chest performs horizontal adduction
• Triceps perform elbow extension
• Both muscles work together

These two exercises are not redundant because:

• The Butterfly ensures the chest is fully stimulated in isolation
• The Chest Press allows you to load the movement pattern more heavily with triceps assistance

Together, they ensure you cover all muscle fibers and maximize mechanical tension on the chest.

Example 2: Quads​

Leg Extensions → Pure isolation

• Only the knee joint moves (knee extension)
• Quads work alone

Hack Squat / Belt Squat → Compound movement

• Both knee AND hip joints move
• Quads perform knee extension
• Glutes perform hip extension
• Both muscles work together

Again, not redundant:

• Leg Extensions isolate the quads completely
• Squats allow heavier loading through a multi-joint pattern

This combination ensures complete quad development.

The Rule: One Isolation + One Compound = Optimal Coverage​

For most major muscle groups, the ideal setup is:

One isolation exercise (to fully isolate the target muscle)
+
One compound exercise (to load the movement pattern more heavily)

This ensures:

• all muscle fibers are reached
• mechanical tension is maximized
• you're not leaving growth on the table

What IS Still Redundant​

The following would still be redundant:

• Pec Deck + Dumbbell Flyes → both are isolation for horizontal adduction
• Chest Press + Incline Press → both are compounds with the same joint actions
• Leg Extensions + Sissy Squats → both are knee extension isolations
• Preacher Curls + Cable Curls → both are elbow flexion isolations

These pairings don't add anything meaningful — they just add fatigue.

Conclusion​

Two exercises for the same muscle group are justified when:

• One is an isolation movement
• One is a compound movement

This is not redundancy — this is smart programming.

But doing multiple isolations or multiple compounds for the same muscle action? That's still wasted time and recovery.

---

Exercise Consistency – Why You Should NOT Change Exercises Every Week​

We already established that mechanical tension is the primary driver of hypertrophy.

But here's what most people don't understand:

To maximize mechanical tension, you need optimal execution.
To develop optimal execution, you need neurological adaptation.
Neurological adaptation takes time — and consistency.

The Problem with Constantly Changing Exercises​

Let's say you train biceps like this:

• Week 1: Preacher Curls
• Week 2: Incline Dumbbell Curls
• Week 3: Cable Curls
• Week 4: Hammer Curls

You are constantly forcing your nervous system to re-learn movement patterns.

Every time you switch exercises, your body has to:

• coordinate new motor units
• learn the range of motion
• stabilize in a new way
• figure out how to optimally recruit the target muscle

While this is happening, you cannot express maximum mechanical tension on the target muscle — because you are still learning the lift.

The Better Approach: Stick with Exercises for Entire Training Blocks​

Now compare that to someone who does:

• Week 1–20: Preacher Curls (entire mesocycle)

This lifter:

• becomes more efficient at the movement every session
• recruits the biceps more effectively over time
• progressively overloads the same exercise with better execution
• maximizes mechanical tension because technique is no longer a limiting factor

This is why consistency wins.

When Should You Change Exercises?​

There are only a few valid reasons to switch an exercise:

1. You've "mixed out" the exercise — meaning you can no longer progress on it effectively
2. The exercise causes pain or discomfort that doesn't resolve
3. Equipment is no longer available

Otherwise? Keep the exercise.

Why "Muscle Confusion" Is Nonsense​

Your muscles don't get "confused."
Your muscles respond to mechanical tension.

If you want to maximize tension, you need to maximize performance — and that requires neurological efficiency, which only comes from repetition.

Changing exercises every week is not "keeping the muscle guessing."
It's keeping your nervous system guessing — and that limits your progress.

---

How to Build the Perfect Training Plan​

At this point, we already know the key variables:

• multiple splits work very well (as listed earlier)
• recovery limits our maximum usable volume
• we work in a fixed rep range (5–8 reps at 0–1 RIR)

Now the question becomes: How do we actually build a training plan step by step?

Let's walk through a practical example using a Full-Body Push / Full-Body Pull setup.

Step 1: Identify the Muscle Groups for Each Day​

Before choosing exercises, we first define which muscle groups are trained on each day.

Full-Body Push Day – Involved Muscle Groups

On a push-focused full-body day, we train:

• Chest
• Shoulders
• Triceps
• Quads
• Glutes
• Adductors

Once the muscle groups are defined, exercise selection becomes straightforward.

Step 2: Choose Appropriate Exercises Based on Availability and Stability​

We now select exercises that:

• are available in most gyms
• allow high mechanical tension
• are stable and easy to progressively overload

Chest

• Pec Deck / Butterfly
• Chest Press (machine)

These are stable, easy to load, and excellent for controlled hypertrophy work.

Shoulders

• Lateral Raise Machine
• Cable lateral raises
• Dumbbell lateral raises
• Shoulder Press 90*

Any variation works as long as it allows strict execution and progression.

Triceps

• Cable Triceps Pushdowns

A simple isolation exercise that is easy to load and recover from.

Quads

We use both:

• Quad isolation: Leg Extensions
• Quad compound: Belt Squat or Hack Squat

These are among the most stable and quad-dominant lower-body exercises available.

Glutes

• Hip Thrusts

One of the best options for loading the glutes through a large range of motion.

Adductors

• Adductor Machine

Simple, effective, and often neglected — but important for balanced leg development.

---

Full-Body Pull Day – Involved Muscle Groups

On a pull-focused full-body day, we train:

• Latissimus
• Upper Back / Trapezius
• Rear Delts
• Biceps
• Hamstrings
• Calves
• Abs

Step 3: Exercise Selection for Pull Day​

Latissimus

We use:

• Vertical pull: Lat Pulldown or Neutral-Grip Pulldown
• Sagittal-plane movement: Single-arm cable row or Cable pullover

This combination covers both shoulder extension and elbow flexion patterns.

Upper Back / Traps

• Upper-back rowing movement: T-Bar Row or Wide-grip machine row

The goal is horizontal pulling with an emphasis on scapular retraction.

Rear Delts

• Reverse Pec Deck
• Cable rear-delt flyes

Simple isolation with high stimulus and low systemic fatigue.

Biceps

• Preacher Curls

Stable, easy to overload, and very consistent in execution.

Hamstrings

• Lying Leg Curl

Calves

• Standing Calf Raise Machine

Straight-leg position to emphasize the gastrocnemius.

Abs

• Ab Machine with spinal flexion

Any ab exercise works as long as:

• it allows progressive overload
• it includes active spinal flexion

Why This Approach Works​

We:

• start with the split
• define muscle groups
• choose stable, overload-friendly exercises
• avoid unnecessary complexity
• avoid redundant exercises

This creates a plan that is:

• easy to recover from
• easy to progress
• highly repeatable
• fully aligned with a science-based approach

Notice what we did NOT do:

• Add three different chest press variations
• Include four different rowing movements
• Program multiple redundant curl variations

Every exercise serves a clear, distinct purpose. No wasted effort.

Complete Full-Body Push / Full-Body Pull Training Program

This is a 4-day training split that alternates between two Push and two Pull variations:

Weekly Schedule:

• Day 1: FB Push A
• Day 2: FB Pull A
• Day 3: Rest
• Day 4: FB Push B
• Day 5: FB Pull B
• Day 6: Rest
• Repeat

---

View attachment 4536121View attachment 4536122

View attachment 4536124View attachment 4536123


Program Notes:

• These are movement patterns, not specific exercises. Choose the actual exercises based on what equipment is available in your gym. For example, "Chest Press Variation" could be a machine chest press, barbell bench press, or dumbbell press — whatever you have access to and can progressively overload consistently.
• Each session totals exactly 15 working sets
• All sets are performed at 1-0 RIR (very close to or at failure)
• Rest periods are standardized at 3 minutes (adjust based on heart rate recovery)
• Exercise variations (A vs B) allow for continued neurological adaptation while preventing excessive CNS fatigue
• This structure provides 2 training sessions per muscle group per week with adequate recovery (2 sleeps between sessions)
• Once you select a specific exercise for each movement pattern, stick with it for the entire training block (12-20 weeks) to maximize progressive overload
• Beginner modification: If you are new to resistance training (less than 2-3 months of consistent training experience), start with 2-3 RIR instead of 1-0 RIR for the first 4-8 weeks. This allows you to learn proper exercise execution and minimize injury risk while your body adapts to hard training. Once your technique is solid and consistent, gradually progress to 1-0 RIR.

---

PART 4: EXECUTION & TECHNIQUE​

Warm-Up Sets – More Than Just Injury Prevention​

Warm-up sets are not just about avoiding injury.
They can directly improve your performance on your working sets.

Many people experience this: They perform more reps on their second working set than on their first.

Why? Because their warm-up was inadequate.

How Many Warm-Up Sets?​

The answer depends on three factors:

1. Is the muscle already warm? (e.g., if you already did another exercise for that muscle)
2. Do you have any pain or discomfort? (you may need extra warm-up sets to prepare the joint)
3. How heavy is your working weight? (heavier loads require more warm-up)

In general, 1–3 warm-up sets are recommended.

Post-Activation Potentiation (PAP) – Unlocking Peak Performance​

To achieve maximum performance on your working sets, we want to trigger something called Post-Activation Potentiation (PAP).

PAP is a short-term increase in muscle performance that occurs when your nervous system and muscles are primed for maximum effort.

In simple terms: Your body becomes "ready" to produce maximum force.

How to Achieve PAP​

The method is straightforward:

1. Perform 1–2 reps at 85–95% of your working weight
2. Rest for 30–60 seconds (until you feel ready)
3. Perform your working set

This "priming" set activates your nervous system without creating fatigue, allowing you to express full strength on your working set.

Practical Example: Bench Press with 90 kg Working Weight​

Let's say your working weight is 90 kg for 5–8 reps.

Your warm-up progression might look like this:

• Warm-up Set 1: 50 kg × 7 reps
• Warm-up Set 2: 70 kg × 4 reps
• PAP Set: 90 kg × 1–2 reps
• Rest: 30–60 seconds (until you feel ready)
• Working Set 1: 90 kg × 5–8 reps (at 0–1 RIR)

Why This Works​

The PAP set:

• activates high-threshold motor units
• prepares your nervous system for maximum effort
• does not create significant fatigue (only 1–2 reps)

The result? You perform better on your first working set — and avoid the common problem of having a "wasted" first set.

Key Takeaway​

Warm-up sets are not filler work.
Done correctly, they directly improve your working-set performance.

Use PAP, and make sure your first working set is your best working set.

---

Form & Technique – The Standardization Rule​

Your technique must look identical to the week before.

This is not negotiable.

If your form changes, your progressive overload data becomes meaningless. You're not comparing apples to apples anymore.

How to Ensure Consistency​

The best method: film every set.

Use a phone on a tripod and record each working set from the same angle every session. Compare your execution to the previous week.

If the form is the same and the load or reps increased → you progressed.
If the form deteriorated → the progression doesn't count.

Standardization is everything.

---

Tempo – How Fast Should You Lift?​

Concentric (lifting phase): As fast as possible.
Lift explosively. Move the weight with maximum intent.

Eccentric (lowering phase): Controlled, but not exaggerated.
Lower the weight at a speed where, if someone yelled "STOP!", you could actually stop the movement.

This means:

• Don't drop the weight uncontrolled
• But also don't take 5–10 seconds on the eccentric

Eccentric work does not need to be slow to be effective. Control is what matters — not artificially prolonged time under tension.

---

Range of Motion (ROM) – Standardization Over Extremes​

Full range of motion is important — but not for the reason most people think.

ROM matters for standardization.

You need to use the same range of motion every session so that your progressive overload is valid.

Example: Lat Pulldown​

Biomechanically, the latissimus has its best leverage at around 90 degrees of shoulder extension. You could, in theory, stop there and still get an excellent stimulus.

You don't necessarily need to pull all the way down until your upper arm touches your torso — but if that's the ROM you use, then you must use that same ROM every session.

The point:​

Extreme full ROM is not required for hypertrophy. What is required is consistent ROM so you can track progress accurately.

Pick a ROM that:

• feels stable
• allows you to load the movement well
• can be repeated identically week after week

Then stick to it.

---

Rest Times Between Sets – Listen to Your Body​

Rest times are not arbitrary numbers.

The rule is simple: Rest until your heart rate returns to baseline.

After a hard set of squats at 0 RIR, you will need significant rest — potentially 3–5 minutes or more — because the systemic demand is high.

After a set of preacher curls, you might only need 1–2 minutes, because the systemic fatigue is much lower.

The key: Don't rush. Wait until your breathing has normalized and your heart rate is back to resting levels.

Unilateral Training (Single-Arm/Leg Work)​

For single-arm or single-leg exercises, do not go directly from right to left.

Instead:

• Perform the right side
• Rest until your heart rate normalizes
• Perform the left side
• Rest again before the next set

This ensures each side gets maximum performance, not just whatever you have left.

---

Training to Failure – Always 0–1 RIR​

Yes. Every working set should be performed at 0–1 RIR.

There are no exceptions.

This is not "sometimes" or "on certain exercises." This is the standard for every working set in this system.

If you're not training close to failure, you're not creating sufficient mechanical tension — and that means suboptimal growth.

Hard sets build muscle. Easy sets do not.

---

Lifting Straps – Stop Being Stupid About Them​

Let's address something that needs to be said clearly:

You are not tougher, stronger, or "more hardcore" because you refuse to use lifting straps.

You are just limiting your back development for no good reason.

The Simple Truth About Building a Big Back​

If you want to build a thick, well-developed back, use lifting straps.

Why?

Because your grip will fail long before your back is fully stimulated.

When you're doing heavy rows, pulldowns, or deadlifts without straps:

• Your forearms give out first
• Your back never reaches true mechanical failure
• You leave growth on the table

"But I Want to Train My Grip Strength!"​

Two responses to this:

First: Even when using straps, you are still training your grip.
You still have to hold the bar. The straps just prevent your grip from being the limiting factor.

Second: If you actually want to train grip strength, then train it directly.

Don't handicap your back training just to get suboptimal grip work.

Add dedicated grip training:

• Farmer's walks
• Dead hangs
• Grip trainers

Train grip when it makes sense — not when it limits your back growth.

The Reality​

Using straps is not "cheating."
It's smart training.

The goal of back training is to build your back — not to test your forearms.

If your grip fails at rep 5, but your lats could have done 8 reps, you just wasted a set.

Straps allow you to:

• push your back to true failure
• maximize mechanical tension on the target muscle
• progress more effectively

When to Use Straps​

Use straps on:

• Heavy rowing movements (T-Bar Rows, Cable Rows, etc.)
• Lat Pulldowns (especially with heavier loads)
• Deadlifts or RDLs (if grip is limiting)

Don't use straps on:

• Exercises where grip isn't the issue (leg work, pressing, etc.)

---

PART 5: PROGRESSION & TROUBLESHOOTING​

Double Progression – Does It Apply to All Sets?​

Double progression applies primarily to the first set.

If you progress on the first set with identical execution, the second and third sets will also progress naturally over time.

You don't need to track progression separately for every set. Focus on the first set, and the rest will follow.

---

Weight Jumps – Adjust Based on the Exercise​

The size of weight increases depends on the exercise:

Large compound movements (Squats, Leg Press, etc.):
Increase by 5–10 kg when you hit 8 reps

Upper-body compounds (Chest Press, Rows, etc.):
Increase by 2.5–5 kg

Isolation movements (Curls, Lateral Raises, etc.):
Increase by 1–2.5 kg

The heavier the exercise and the more muscle mass involved, the larger the jumps can be.

---

What to Do When You Stop Progressing​

If you hit a plateau and can no longer add reps or weight, follow this checklist in order:

1. Check your execution
   Is your form still identical to previous weeks? Film yourself and compare.
   
   
2. Improve recovery
   Are you sleeping enough? Managing stress?
   
   
3. Improve nutrition
   Are you eating enough? Getting adequate protein?
   
   
4. Improve hydration
   Are you drinking enough water throughout the day?
   
   
5. Improve your warm-up
   Are you using PAP effectively? Are you adequately prepared?
   
   
6. Reduce grinding and "ego" reps
   Are you pushing so hard that you're frying your CNS?
   
   
7. Only then: Adjust volume
   If everything else is dialed in and you still can't progress, try reducing volume for that muscle group by one set for 2 weeks and reassess.

Most of the time, the issue is not the program — it's execution, recovery, or nutrition.

---

Deload Phases – Not Necessary with Proper Volume Management​

If you are managing volume intelligently using the sleep-based approach outlined earlier, deloads are generally unnecessary.

Why?

Because you are already adjusting volume based on recovery windows. You're not accumulating excessive fatigue in the first place.

Most people need deloads because they program too much volume and don't respect recovery. If you avoid that mistake, planned deloads become redundant.

---

PART 6: ADDITIONAL CONSIDERATIONS​

Cardio – Should You Do It?​

Yes. Absolutely.

There are two main reasons to do cardiovascular training:

Reason 1: Health and Longevity​

Regular Zone 2 cardio training can increase your lifespan by approximately 17%.

This is not optional if you care about long-term health.

Reason 2: Preventing Cardiovascular Failure During Training​

When you perform exercises like squats or leg presses, you need adequate cardiovascular capacity.

If your conditioning is poor, you will experience cardiovascular failure before muscular failure.

This means:

• Your legs could do more reps
• But your heart and lungs give out first
• You never reach true mechanical failure on the target muscle

Cardio ensures that when you fail on a set, it's because your muscles failed — not because you ran out of breath.

How Much Cardio?​

Minimum: 60 minutes per week

You can structure this however it fits your schedule:

• 1 session of 60 minutes
• 6 sessions of 10 minutes (e.g., every morning)
• 2 sessions of 30 minutes
• Any combination that totals at least 60 minutes

In a Bulk: Stick to the minimum (60 minutes/week)
In a Cut: You can increase as needed — there is no upper limit

When Should You Do Cardio?​

Timing is generally flexible, with one exception:

Do NOT do cardio immediately before your resistance training.

If you do cardio right before lifting, you will:

• be pre-fatigued
• perform worse on your working sets
• compromise your progressive overload

Better options:

• On rest days (ideal)
• In the morning, with resistance training in the afternoon/evening
• After your resistance training (if you must do it on the same day)

Zone 2 cardio is already demanding, so plan accordingly.

Does Cardio Hurt Your Gains?​

Short answer: Not really — and it may even help.

The concern: Cardio creates systemic fatigue, which could theoretically interfere with muscle growth.

The reality: Cardio and resistance training use different muscle fiber types:

• Resistance training (5–8 reps at 0–1 RIR): Type 2 muscle fibers
• Zone 2 cardio: Type 1 muscle fibers

Because they target different fiber types, cardio does not directly interfere with hypertrophy adaptations.

In fact, improved cardiovascular capacity supports better training performance — which ultimately supports better gains.

---

Mind-Muscle Connection – Does It Matter?​

No. Mind-muscle connection is not important for hypertrophy in this system.

Why?

Because we train in the 5–8 rep range at 0–1 RIR, lactate does not accumulate in the muscle during the set.

This means:

• You won't feel a "burn"
• You won't feel a strong pump
• You won't have a clear sensation that you're "hitting the muscle"

And that's fine. Mechanical tension — not "feeling" — is what drives growth.

Optional Test:​

If you're unsure whether you're targeting the right muscle, you can occasionally do a high-rep "feel" session (15–20 reps) to get feedback from the pump and burn.

This can help you confirm that your setup and execution are correct. But this is diagnostic, not your regular training approach.

---

Beginners vs. Advanced Lifters – Is There a Difference?​

Not really. The core principles remain the same.

One potential difference:

Advanced lifters may benefit from including slightly more isolation exercises in their programs.

However: Even beginners should use plenty of isolation exercises.

Why?

Isolation exercises allow you to recruit more motor units specifically for the target muscle, without interference from synergists or stabilizers.

This makes them highly effective for hypertrophy — regardless of training experience.

---

bump

 

[tittenoderarsch?]

This is a comprehensive guide for both beginners and advanced lifters. Everything you'll read here is based on my personal experience as a science-based lifter.

If the term "science-based lifting" already turns you off, feel free to leave now — because this guide is 100% science-based and 100% evidence-driven. No guesswork, no bro-science, no "this worked for me once so it must be universal."

Before we start, I want to make one thing clear: this is very likely the most extensive true guide you'll find on this forum. The goal is not to overwhelm, but to explain things properly — from the ground up — and connect the dots most people never explain.

I'm writing this guide in collaboration with ChatGPT. That's why you won't hear any insults here - unfortunately. My input is written in my native language, and ChatGPT helps translate and structure everything into clear English. The reason is simple:

• I don't feel like writing everything out in German and translating it afterward, and
• writing has never been my strongest skill — clarity and correctness matter more than fancy wording.

What does matter is that the information in this guide is accurate, practical, and backed by real evidence.


Let's get started.

---

PART 1: TRAINING FUNDAMENTALS​

Training – The Foundation of Everything​

Training is by far the most important factor when it comes to building muscle. It's not even close.

Training determines whether you build muscle — or whether nothing happens at all.

You can have perfect nutrition.
You can sleep eight hours every night.
You can take every supplement on the market.

If your training is bad, you will not build muscle.

Nutrition, sleep, and supplements do not build muscle by themselves. They only support the adaptation that is created by training.

---

Muscle Growth: What Actually Builds Muscle​

When it comes to hypertrophy, there is one primary driver: mechanical tension.

Mechanical tension is the stimulus that tells your body: "We need to adapt. We need more muscle."

Things that do NOT directly build muscle:

• metabolic stress
• the pump
• sweating
• soreness
• feeling exhausted after a workout

These can occur during good training, but they are not the cause of muscle growth.

If mechanical tension is not present — meaning sufficiently heavy load, controlled execution, and proximity to failure — hypertrophy will be minimal or nonexistent.

---

Repetitions, Intensity, and Proximity to Failure​

We know from both research and practical experience that the last ~5 repetitions of a set create the majority of the hypertrophy stimulus.

These are the reps where mechanical tension is highest.

That is why, in every program presented in this guide, we will work with:

• 5–8 repetitions per set
• 0–1 RIR (Reps in Reserve)

This means most sets are taken very close to failure, or directly to failure, in a controlled and intentional way.

Low effort does not build muscle. Hard sets do.

---

Progressive Overload – What It Actually Is​

Progressive overload is not optional.

It is the only reliable short-term indicator that you are actually building muscle.

If, under the same conditions:

• same exercise
• same technique
• same range of motion
• same setup
• same nutrition
• same training time

...you are able to move more weight or perform more repetitions, then one thing is clear:

You have built muscle.

Why Progressive Overload Matters​

Muscle growth is not something you can feel from session to session. Visual changes take time, and soreness means nothing.

Progressive overload is different.

It is the only short-term feedback system that tells you your training is working.

If performance goes up under standardized conditions, muscle tissue had to adapt. There is no workaround, no placebo, no "mind-muscle connection" explanation that replaces this.

What Progressive Overload Is NOT​

• It is not chasing a pump
• It is not random PRs with worse form
• It is not ego lifting
• It is not adding volume without progression

Overload only counts if execution stays consistent.

The Importance of a Training Log​

Because of this, we track everything.

You must keep a training log.

For every exercise, you write down:

• the machine or variation used
• the load
• the repetitions performed

If you don't track your lifts, you don't know whether you are progressing — and if you don't know that, you are guessing.

No logbook = no data.
No data = no progress.

How it should look like:

Pull-FB:

Exercise - last Load and reps from first set of last week
Weight x Reps (+ note if necessary)
Weight x Reps (+ note if necessary)

Exercise - last Load and reps from first set of last week
Weight x Reps (+ note if necessary)
Weight x Reps (+ note if necessary)
…

Short-Term vs. Long-Term Indicators​

Long term, you will see changes in your physique.
Short term, progressive overload is the signal.

That's why everything in this guide — split selection, volume, exercise choice — ultimately serves one purpose: making progressive overload possible and repeatable.

---

Progressive Overload in Practice – The Double Progression Method​

Now that we understand why progressive overload matters, we need to understand how to apply it systematically.

We already know we work in the 5–8 rep range at 0–1 RIR. But how do we actually progress from session to session?

The answer is double progression.

How Double Progression Works​

Here's the simple rule:

1. You start with a weight you can perform for 5 clean reps (at 0–1 RIR)
2. Every session, you try to add reps with that same weight
3. Once you reach 8 reps with that weight, you increase the load
4. With the new, heavier weight, you drop back down to 5 reps — and repeat the cycle

Practical Example: Lat Pulldown​

• Week 1: 80 kg × 5 reps
• Week 2: 80 kg × 6 reps
• Week 3: 80 kg × 7 reps
• Week 4: 80 kg × 8 reps → progression threshold reached
• Week 5: 85 kg × 5 reps → weight increased, reps reset

And the cycle repeats.

---

PART 2: PROGRAM DESIGN​

Training Frequency and Split Selection​

Based on the latest scientific evidence, we know that a higher training frequency is superior for hypertrophy.

Hitting a muscle at least twice per week is considered optimal.

The reason is simple: A muscle only grows for roughly 24–48 hours after a sufficient training stimulus. After that window, muscle protein synthesis returns to baseline. If you wait too long before training that muscle again, you are wasting potential growth time.

That is why, throughout this guide, we will generally work with higher frequencies rather than once-per-week "bro splits."

Recommended Training Splits​

The following splits are all solid, evidence-based options and work very well when programmed correctly:

• Upper / Lower
• Push-FB / Pull-FB
• Full Body Every Other Day (FEOD)
• Push Pull Legs

(FB = Full Body)

Other highly effective splits include:

• Anterior / Posterior
• Torso / Limbs (Maybe too much for your arms)
• Full Body 3x per week

All of these splits allow for adequate volume, sufficient intensity, and — most importantly — an appropriate frequency per muscle group.

---

Training Volume per Muscle Group – A Sleep-Based Approach​

When talking about training volume, most people think in weekly sets per muscle group.

In this guide, we will use a more practical and recovery-oriented approach:

Volume will be planned based on sleeps, not weeks.

The key question is not: "How many sets per week do I do?"

The key question is: "How many sleeps do I have to recover before I train that muscle again?"

What Do We Mean by "Sleeps"?​

A "sleep" simply refers to one full night of sleep between two sessions that train the same muscle group.

Examples:

• Upper / Lower / Rest / Upper → 3 sleeps between upper-body sessions
• Full Body Every Other Day (FEOD) → 2 sleeps between full-body sessions
• Push / Pull / Legs → 4 sleeps before the same muscle group is trained again

Recovery capacity — and therefore tolerable volume — scales with the number of sleeps available.

Volume Allocation Based on Sleeps​

Instead of distributing volume across a calendar week, we distribute volume across recovery windows.

General guidelines:

• 2 sleeps → 1–3 sets per muscle group (3 sets maximum)
• 3 sleeps → 2–5 sets per muscle group (5 sets maximum)
• 4 sleeps → up to ~6 sets per muscle group

This volume refers to hard, effective sets performed in the 5–8 rep range at 0–1 RIR.

More volume than this does not automatically mean more growth — it often just means more fatigue and worse performance in the next session.

Why This Works​

Muscle growth happens during recovery. The more recovery time you have, the more high-quality volume you can tolerate and benefit from.

Planning volume around sleeps:

• respects individual recovery
• works across different splits
• prevents unnecessary junk volume

This approach allows us to build programs that are aggressive enough to grow, but conservative enough to recover from.

---

Muscle Prioritization – How to Actually Focus on a Muscle Group​

There is a common misconception: People think that certain splits "prioritize" certain muscle groups.

This is not true.

No split inherently prioritizes anything. A Push/Pull/Legs split does not prioritize chest. An Upper/Lower split does not prioritize back. A Full Body split does not prioritize legs.

The split does not determine priority. Exercise order does.

How to Prioritize a Muscle Group​

If you want to prioritize a muscle group, the method is extremely simple:

Train it first.

When you are fresh — not pre-fatigued, not systemically tired — you will:

• lift heavier weights
• perform more quality reps
• execute with better technique
• recover better between sets

That is where the best stimulus happens.

Practical Example: Prioritizing Shoulders​

Let's say you want to focus on shoulder development.

Instead of this order:

1. Chest Press
2. Pec Deck
3. Lateral Raises
4. Triceps Pushdowns

You do this:

1. Lateral Raises ← trained first, when fresh
2. Chest Press
3. Pec Deck
4. Triceps Pushdowns

Same split. Same exercises. Different priority.

Why This Works​

Your performance capacity is highest at the start of a session. By the time you reach the last exercises, you are:

• neurally fatigued
• systemically tired
• less focused

The muscles you train first get the best version of you. The muscles you train last get what's left.

That is prioritization.

---

If You Hate Training Legs (Reality Check Included)​

Ideally, you should train everything.

That said, if you really don't want to train legs properly, there are still workable (though suboptimal) options, such as:

• Upper Every Other Day
• Push / Pull (with minimal or no leg training)

These setups can still produce upper-body progress, but understand this clearly:

Avoiding leg training is a choice, not an optimal strategy.

---

PART 3: EXERCISE SELECTION​

Exercise Selection – Avoiding Redundancy and Wasted Time​

One of the biggest mistakes people make when designing training programs is exercise redundancy.

You see it all the time:

• Three different curl variations in the same session
• Four different rowing movements for the upper back
• Multiple chest presses from slightly different angles

This is not "hitting the muscle from all angles."
This is wasting time and recovery capacity.

How to Choose Exercises Properly​

The method is simple:

1. Identify the primary action of the muscle you want to train
2. Choose one exercise that performs that action
3. Do not add more exercises that perform the exact same action

That's it.

Practical Example: Chest Training​

The primary action of the chest is horizontal adduction of the humerus (bringing the upper arm across the body).

If you do:

• Pec Deck / Butterfly Machine

You are already training horizontal adduction.

Now, if you also add:

• Dumbbell Bench Press

You are performing the exact same movement pattern again — horizontal adduction of the humerus.

This is redundant.

Both exercises train the same muscle action. The second one does not add anything meaningful. It just costs you time and recovery capacity.

What Redundancy Looks Like​

Here are common examples of redundant exercise pairings:

Biceps:

• Preacher Curls + Alternating Dumbbell Curls
  → Both perform elbow flexion with supination — redundant

Triceps:

• Rope Pushdowns + Straight-Bar Pushdowns
  → Both perform elbow extension — redundant

Chest:

• Butterfly + Dumbbell Bench Press
  → Both perform horizontal adduction — redundant

Upper Back:

• T-Bar Row + Seated Cable Row + Chest-Supported Row
  → All perform horizontal pulling / scapular retraction — redundant

Why This Matters​

Every exercise you do:

• costs energy
• creates fatigue
• requires recovery

If two exercises train the same muscle action, the second one is not giving you more growth — it's just giving you more fatigue.

Instead of wasting that time and recovery on redundant work, you could:

• train another muscle group
• add more rest between sets for better performance
• leave the gym earlier and recover better

How to Check for Redundancy​

Ask yourself two questions:

1. What is the primary muscle action of this exercise?
2. Am I already doing another exercise with the exact same action?

If yes → remove one of them.

The Right Way: One Exercise Per Muscle Action​

For chest:

• One exercise for horizontal adduction (Pec Deck, Chest Press, etc.)
  → Done. Move on.

For biceps:

• One exercise for elbow flexion (Preacher Curls, Cable Curls, etc.)
  → Done. Move on.

For triceps:

• One exercise for elbow extension (Pushdowns, Overhead Extensions, etc.)
  → Done. Move on.

This approach:

• saves time
• saves recovery capacity
• keeps training focused and efficient
• allows you to train more muscle groups or rest more between quality sets

---

When Two Exercises for the Same Muscle ARE Justified​

Now, you might notice something in the example programs:

We do both Chest Press and Butterfly for chest.
We do both Squats (or Hack Squat) and Leg Extensions for quads.

Wait — didn't we just say redundancy is bad?

This is NOT redundancy. Here's why:

Isolation vs. Compound Movements​

There is a critical difference between:

Isolation exercises — where only one joint moves, and the target muscle works alone

Compound exercises — where multiple joints move, and multiple muscles work together

Example 1: Chest​

Butterfly / Pec Deck → Pure isolation

• Only the shoulder joint moves (horizontal adduction)
• The chest works almost completely alone
• Triceps are not involved

Chest Press → Compound movement

• Both shoulder AND elbow joints move
• Chest performs horizontal adduction
• Triceps perform elbow extension
• Both muscles work together

These two exercises are not redundant because:

• The Butterfly ensures the chest is fully stimulated in isolation
• The Chest Press allows you to load the movement pattern more heavily with triceps assistance

Together, they ensure you cover all muscle fibers and maximize mechanical tension on the chest.

Example 2: Quads​

Leg Extensions → Pure isolation

• Only the knee joint moves (knee extension)
• Quads work alone

Hack Squat / Belt Squat → Compound movement

• Both knee AND hip joints move
• Quads perform knee extension
• Glutes perform hip extension
• Both muscles work together

Again, not redundant:

• Leg Extensions isolate the quads completely
• Squats allow heavier loading through a multi-joint pattern

This combination ensures complete quad development.

The Rule: One Isolation + One Compound = Optimal Coverage​

For most major muscle groups, the ideal setup is:

One isolation exercise (to fully isolate the target muscle)
+
One compound exercise (to load the movement pattern more heavily)

This ensures:

• all muscle fibers are reached
• mechanical tension is maximized
• you're not leaving growth on the table

What IS Still Redundant​

The following would still be redundant:

• Pec Deck + Dumbbell Flyes → both are isolation for horizontal adduction
• Chest Press + Incline Press → both are compounds with the same joint actions
• Leg Extensions + Sissy Squats → both are knee extension isolations
• Preacher Curls + Cable Curls → both are elbow flexion isolations

These pairings don't add anything meaningful — they just add fatigue.

Conclusion​

Two exercises for the same muscle group are justified when:

• One is an isolation movement
• One is a compound movement

This is not redundancy — this is smart programming.

But doing multiple isolations or multiple compounds for the same muscle action? That's still wasted time and recovery.

---

Exercise Consistency – Why You Should NOT Change Exercises Every Week​

We already established that mechanical tension is the primary driver of hypertrophy.

But here's what most people don't understand:

To maximize mechanical tension, you need optimal execution.
To develop optimal execution, you need neurological adaptation.
Neurological adaptation takes time — and consistency.

The Problem with Constantly Changing Exercises​

Let's say you train biceps like this:

• Week 1: Preacher Curls
• Week 2: Incline Dumbbell Curls
• Week 3: Cable Curls
• Week 4: Hammer Curls

You are constantly forcing your nervous system to re-learn movement patterns.

Every time you switch exercises, your body has to:

• coordinate new motor units
• learn the range of motion
• stabilize in a new way
• figure out how to optimally recruit the target muscle

While this is happening, you cannot express maximum mechanical tension on the target muscle — because you are still learning the lift.

The Better Approach: Stick with Exercises for Entire Training Blocks​

Now compare that to someone who does:

• Week 1–20: Preacher Curls (entire mesocycle)

This lifter:

• becomes more efficient at the movement every session
• recruits the biceps more effectively over time
• progressively overloads the same exercise with better execution
• maximizes mechanical tension because technique is no longer a limiting factor

This is why consistency wins.

When Should You Change Exercises?​

There are only a few valid reasons to switch an exercise:

1. You've "mixed out" the exercise — meaning you can no longer progress on it effectively
2. The exercise causes pain or discomfort that doesn't resolve
3. Equipment is no longer available

Otherwise? Keep the exercise.

Why "Muscle Confusion" Is Nonsense​

Your muscles don't get "confused."
Your muscles respond to mechanical tension.

If you want to maximize tension, you need to maximize performance — and that requires neurological efficiency, which only comes from repetition.

Changing exercises every week is not "keeping the muscle guessing."
It's keeping your nervous system guessing — and that limits your progress.

---

How to Build the Perfect Training Plan​

At this point, we already know the key variables:

• multiple splits work very well (as listed earlier)
• recovery limits our maximum usable volume
• we work in a fixed rep range (5–8 reps at 0–1 RIR)

Now the question becomes: How do we actually build a training plan step by step?

Let's walk through a practical example using a Full-Body Push / Full-Body Pull setup.

Step 1: Identify the Muscle Groups for Each Day​

Before choosing exercises, we first define which muscle groups are trained on each day.

Full-Body Push Day – Involved Muscle Groups

On a push-focused full-body day, we train:

• Chest
• Shoulders
• Triceps
• Quads
• Glutes
• Adductors

Once the muscle groups are defined, exercise selection becomes straightforward.

Step 2: Choose Appropriate Exercises Based on Availability and Stability​

We now select exercises that:

• are available in most gyms
• allow high mechanical tension
• are stable and easy to progressively overload

Chest

• Pec Deck / Butterfly
• Chest Press (machine)

These are stable, easy to load, and excellent for controlled hypertrophy work.

Shoulders

• Lateral Raise Machine
• Cable lateral raises
• Dumbbell lateral raises
• Shoulder Press 90*

Any variation works as long as it allows strict execution and progression.

Triceps

• Cable Triceps Pushdowns

A simple isolation exercise that is easy to load and recover from.

Quads

We use both:

• Quad isolation: Leg Extensions
• Quad compound: Belt Squat or Hack Squat

These are among the most stable and quad-dominant lower-body exercises available.

Glutes

• Hip Thrusts

One of the best options for loading the glutes through a large range of motion.

Adductors

• Adductor Machine

Simple, effective, and often neglected — but important for balanced leg development.

---

Full-Body Pull Day – Involved Muscle Groups

On a pull-focused full-body day, we train:

• Latissimus
• Upper Back / Trapezius
• Rear Delts
• Biceps
• Hamstrings
• Calves
• Abs

Step 3: Exercise Selection for Pull Day​

Latissimus

We use:

• Vertical pull: Lat Pulldown or Neutral-Grip Pulldown
• Sagittal-plane movement: Single-arm cable row or Cable pullover

This combination covers both shoulder extension and elbow flexion patterns.

Upper Back / Traps

• Upper-back rowing movement: T-Bar Row or Wide-grip machine row

The goal is horizontal pulling with an emphasis on scapular retraction.

Rear Delts

• Reverse Pec Deck
• Cable rear-delt flyes

Simple isolation with high stimulus and low systemic fatigue.

Biceps

• Preacher Curls

Stable, easy to overload, and very consistent in execution.

Hamstrings

• Lying Leg Curl

Calves

• Standing Calf Raise Machine

Straight-leg position to emphasize the gastrocnemius.

Abs

• Ab Machine with spinal flexion

Any ab exercise works as long as:

• it allows progressive overload
• it includes active spinal flexion

Why This Approach Works​

We:

• start with the split
• define muscle groups
• choose stable, overload-friendly exercises
• avoid unnecessary complexity
• avoid redundant exercises

This creates a plan that is:

• easy to recover from
• easy to progress
• highly repeatable
• fully aligned with a science-based approach

Notice what we did NOT do:

• Add three different chest press variations
• Include four different rowing movements
• Program multiple redundant curl variations

Every exercise serves a clear, distinct purpose. No wasted effort.

Complete Full-Body Push / Full-Body Pull Training Program

This is a 4-day training split that alternates between two Push and two Pull variations:

Weekly Schedule:

• Day 1: FB Push A
• Day 2: FB Pull A
• Day 3: Rest
• Day 4: FB Push B
• Day 5: FB Pull B
• Day 6: Rest
• Repeat

---

View attachment 4536121View attachment 4536122

View attachment 4536124View attachment 4536123


Program Notes:

• These are movement patterns, not specific exercises. Choose the actual exercises based on what equipment is available in your gym. For example, "Chest Press Variation" could be a machine chest press, barbell bench press, or dumbbell press — whatever you have access to and can progressively overload consistently.
• Each session totals exactly 15 working sets
• All sets are performed at 1-0 RIR (very close to or at failure)
• Rest periods are standardized at 3 minutes (adjust based on heart rate recovery)
• Exercise variations (A vs B) allow for continued neurological adaptation while preventing excessive CNS fatigue
• This structure provides 2 training sessions per muscle group per week with adequate recovery (2 sleeps between sessions)
• Once you select a specific exercise for each movement pattern, stick with it for the entire training block (12-20 weeks) to maximize progressive overload
• Beginner modification: If you are new to resistance training (less than 2-3 months of consistent training experience), start with 2-3 RIR instead of 1-0 RIR for the first 4-8 weeks. This allows you to learn proper exercise execution and minimize injury risk while your body adapts to hard training. Once your technique is solid and consistent, gradually progress to 1-0 RIR.

---

PART 4: EXECUTION & TECHNIQUE​

Warm-Up Sets – More Than Just Injury Prevention​

Warm-up sets are not just about avoiding injury.
They can directly improve your performance on your working sets.

Many people experience this: They perform more reps on their second working set than on their first.

Why? Because their warm-up was inadequate.

How Many Warm-Up Sets?​

The answer depends on three factors:

1. Is the muscle already warm? (e.g., if you already did another exercise for that muscle)
2. Do you have any pain or discomfort? (you may need extra warm-up sets to prepare the joint)
3. How heavy is your working weight? (heavier loads require more warm-up)

In general, 1–3 warm-up sets are recommended.

Post-Activation Potentiation (PAP) – Unlocking Peak Performance​

To achieve maximum performance on your working sets, we want to trigger something called Post-Activation Potentiation (PAP).

PAP is a short-term increase in muscle performance that occurs when your nervous system and muscles are primed for maximum effort.

In simple terms: Your body becomes "ready" to produce maximum force.

How to Achieve PAP​

The method is straightforward:

1. Perform 1–2 reps at 85–95% of your working weight
2. Rest for 30–60 seconds (until you feel ready)
3. Perform your working set

This "priming" set activates your nervous system without creating fatigue, allowing you to express full strength on your working set.

Practical Example: Bench Press with 90 kg Working Weight​

Let's say your working weight is 90 kg for 5–8 reps.

Your warm-up progression might look like this:

• Warm-up Set 1: 50 kg × 7 reps
• Warm-up Set 2: 70 kg × 4 reps
• PAP Set: 90 kg × 1–2 reps
• Rest: 30–60 seconds (until you feel ready)
• Working Set 1: 90 kg × 5–8 reps (at 0–1 RIR)

Why This Works​

The PAP set:

• activates high-threshold motor units
• prepares your nervous system for maximum effort
• does not create significant fatigue (only 1–2 reps)

The result? You perform better on your first working set — and avoid the common problem of having a "wasted" first set.

Key Takeaway​

Warm-up sets are not filler work.
Done correctly, they directly improve your working-set performance.

Use PAP, and make sure your first working set is your best working set.

---

Form & Technique – The Standardization Rule​

Your technique must look identical to the week before.

This is not negotiable.

If your form changes, your progressive overload data becomes meaningless. You're not comparing apples to apples anymore.

How to Ensure Consistency​

The best method: film every set.

Use a phone on a tripod and record each working set from the same angle every session. Compare your execution to the previous week.

If the form is the same and the load or reps increased → you progressed.
If the form deteriorated → the progression doesn't count.

Standardization is everything.

---

Tempo – How Fast Should You Lift?​

Concentric (lifting phase): As fast as possible.
Lift explosively. Move the weight with maximum intent.

Eccentric (lowering phase): Controlled, but not exaggerated.
Lower the weight at a speed where, if someone yelled "STOP!", you could actually stop the movement.

This means:

• Don't drop the weight uncontrolled
• But also don't take 5–10 seconds on the eccentric

Eccentric work does not need to be slow to be effective. Control is what matters — not artificially prolonged time under tension.

---

Range of Motion (ROM) – Standardization Over Extremes​

Full range of motion is important — but not for the reason most people think.

ROM matters for standardization.

You need to use the same range of motion every session so that your progressive overload is valid.

Example: Lat Pulldown​

Biomechanically, the latissimus has its best leverage at around 90 degrees of shoulder extension. You could, in theory, stop there and still get an excellent stimulus.

You don't necessarily need to pull all the way down until your upper arm touches your torso — but if that's the ROM you use, then you must use that same ROM every session.

The point:​

Extreme full ROM is not required for hypertrophy. What is required is consistent ROM so you can track progress accurately.

Pick a ROM that:

• feels stable
• allows you to load the movement well
• can be repeated identically week after week

Then stick to it.

---

Rest Times Between Sets – Listen to Your Body​

Rest times are not arbitrary numbers.

The rule is simple: Rest until your heart rate returns to baseline.

After a hard set of squats at 0 RIR, you will need significant rest — potentially 3–5 minutes or more — because the systemic demand is high.

After a set of preacher curls, you might only need 1–2 minutes, because the systemic fatigue is much lower.

The key: Don't rush. Wait until your breathing has normalized and your heart rate is back to resting levels.

Unilateral Training (Single-Arm/Leg Work)​

For single-arm or single-leg exercises, do not go directly from right to left.

Instead:

• Perform the right side
• Rest until your heart rate normalizes
• Perform the left side
• Rest again before the next set

This ensures each side gets maximum performance, not just whatever you have left.

---

Training to Failure – Always 0–1 RIR​

Yes. Every working set should be performed at 0–1 RIR.

There are no exceptions.

This is not "sometimes" or "on certain exercises." This is the standard for every working set in this system.

If you're not training close to failure, you're not creating sufficient mechanical tension — and that means suboptimal growth.

Hard sets build muscle. Easy sets do not.

---

Lifting Straps – Stop Being Stupid About Them​

Let's address something that needs to be said clearly:

You are not tougher, stronger, or "more hardcore" because you refuse to use lifting straps.

You are just limiting your back development for no good reason.

The Simple Truth About Building a Big Back​

If you want to build a thick, well-developed back, use lifting straps.

Why?

Because your grip will fail long before your back is fully stimulated.

When you're doing heavy rows, pulldowns, or deadlifts without straps:

• Your forearms give out first
• Your back never reaches true mechanical failure
• You leave growth on the table

"But I Want to Train My Grip Strength!"​

Two responses to this:

First: Even when using straps, you are still training your grip.
You still have to hold the bar. The straps just prevent your grip from being the limiting factor.

Second: If you actually want to train grip strength, then train it directly.

Don't handicap your back training just to get suboptimal grip work.

Add dedicated grip training:

• Farmer's walks
• Dead hangs
• Grip trainers

Train grip when it makes sense — not when it limits your back growth.

The Reality​

Using straps is not "cheating."
It's smart training.

The goal of back training is to build your back — not to test your forearms.

If your grip fails at rep 5, but your lats could have done 8 reps, you just wasted a set.

Straps allow you to:

• push your back to true failure
• maximize mechanical tension on the target muscle
• progress more effectively

When to Use Straps​

Use straps on:

• Heavy rowing movements (T-Bar Rows, Cable Rows, etc.)
• Lat Pulldowns (especially with heavier loads)
• Deadlifts or RDLs (if grip is limiting)

Don't use straps on:

• Exercises where grip isn't the issue (leg work, pressing, etc.)

---

PART 5: PROGRESSION & TROUBLESHOOTING​

Double Progression – Does It Apply to All Sets?​

Double progression applies primarily to the first set.

If you progress on the first set with identical execution, the second and third sets will also progress naturally over time.

You don't need to track progression separately for every set. Focus on the first set, and the rest will follow.

---

Weight Jumps – Adjust Based on the Exercise​

The size of weight increases depends on the exercise:

Large compound movements (Squats, Leg Press, etc.):
Increase by 5–10 kg when you hit 8 reps

Upper-body compounds (Chest Press, Rows, etc.):
Increase by 2.5–5 kg

Isolation movements (Curls, Lateral Raises, etc.):
Increase by 1–2.5 kg

The heavier the exercise and the more muscle mass involved, the larger the jumps can be.

---

What to Do When You Stop Progressing​

If you hit a plateau and can no longer add reps or weight, follow this checklist in order:

1. Check your execution
   Is your form still identical to previous weeks? Film yourself and compare.
   
   
2. Improve recovery
   Are you sleeping enough? Managing stress?
   
   
3. Improve nutrition
   Are you eating enough? Getting adequate protein?
   
   
4. Improve hydration
   Are you drinking enough water throughout the day?
   
   
5. Improve your warm-up
   Are you using PAP effectively? Are you adequately prepared?
   
   
6. Reduce grinding and "ego" reps
   Are you pushing so hard that you're frying your CNS?
   
   
7. Only then: Adjust volume
   If everything else is dialed in and you still can't progress, try reducing volume for that muscle group by one set for 2 weeks and reassess.

Most of the time, the issue is not the program — it's execution, recovery, or nutrition.

---

Deload Phases – Not Necessary with Proper Volume Management​

If you are managing volume intelligently using the sleep-based approach outlined earlier, deloads are generally unnecessary.

Why?

Because you are already adjusting volume based on recovery windows. You're not accumulating excessive fatigue in the first place.

Most people need deloads because they program too much volume and don't respect recovery. If you avoid that mistake, planned deloads become redundant.

---

PART 6: ADDITIONAL CONSIDERATIONS​

Cardio – Should You Do It?​

Yes. Absolutely.

There are two main reasons to do cardiovascular training:

Reason 1: Health and Longevity​

Regular Zone 2 cardio training can increase your lifespan by approximately 17%.

This is not optional if you care about long-term health.

Reason 2: Preventing Cardiovascular Failure During Training​

When you perform exercises like squats or leg presses, you need adequate cardiovascular capacity.

If your conditioning is poor, you will experience cardiovascular failure before muscular failure.

This means:

• Your legs could do more reps
• But your heart and lungs give out first
• You never reach true mechanical failure on the target muscle

Cardio ensures that when you fail on a set, it's because your muscles failed — not because you ran out of breath.

How Much Cardio?​

Minimum: 60 minutes per week

You can structure this however it fits your schedule:

• 1 session of 60 minutes
• 6 sessions of 10 minutes (e.g., every morning)
• 2 sessions of 30 minutes
• Any combination that totals at least 60 minutes

In a Bulk: Stick to the minimum (60 minutes/week)
In a Cut: You can increase as needed — there is no upper limit

When Should You Do Cardio?​

Timing is generally flexible, with one exception:

Do NOT do cardio immediately before your resistance training.

If you do cardio right before lifting, you will:

• be pre-fatigued
• perform worse on your working sets
• compromise your progressive overload

Better options:

• On rest days (ideal)
• In the morning, with resistance training in the afternoon/evening
• After your resistance training (if you must do it on the same day)

Zone 2 cardio is already demanding, so plan accordingly.

Does Cardio Hurt Your Gains?​

Short answer: Not really — and it may even help.

The concern: Cardio creates systemic fatigue, which could theoretically interfere with muscle growth.

The reality: Cardio and resistance training use different muscle fiber types:

• Resistance training (5–8 reps at 0–1 RIR): Type 2 muscle fibers
• Zone 2 cardio: Type 1 muscle fibers

Because they target different fiber types, cardio does not directly interfere with hypertrophy adaptations.

In fact, improved cardiovascular capacity supports better training performance — which ultimately supports better gains.

---

Mind-Muscle Connection – Does It Matter?​

No. Mind-muscle connection is not important for hypertrophy in this system.

Why?

Because we train in the 5–8 rep range at 0–1 RIR, lactate does not accumulate in the muscle during the set.

This means:

• You won't feel a "burn"
• You won't feel a strong pump
• You won't have a clear sensation that you're "hitting the muscle"

And that's fine. Mechanical tension — not "feeling" — is what drives growth.

Optional Test:​

If you're unsure whether you're targeting the right muscle, you can occasionally do a high-rep "feel" session (15–20 reps) to get feedback from the pump and burn.

This can help you confirm that your setup and execution are correct. But this is diagnostic, not your regular training approach.

---

Beginners vs. Advanced Lifters – Is There a Difference?​

Not really. The core principles remain the same.

One potential difference:

Advanced lifters may benefit from including slightly more isolation exercises in their programs.

However: Even beginners should use plenty of isolation exercises.

Why?

Isolation exercises allow you to recruit more motor units specifically for the target muscle, without interference from synergists or stabilizers.

This makes them highly effective for hypertrophy — regardless of training experience.

---

bump