science based lifting

copinglowltn

copinglowltn

Bronze
Joined
May 22, 2024
Posts
463
Reputation
266
First of all pick a high frequency split, as hitting a muscle 1 time 3 times per week is more effective than 2 sets twice as a week as muscles go into atrophy every 48 hours. preferably full body (every other day) or upper lower. anything that rotates between 3x frequency or 3-4x. the number of sets listed correlate with the split choice as full body doing more than 1 set per muscle group (unless it’s a weakpoint) is redundant.

exercise selection

if your doing full body you want to hit a muscle 1-2RIR (reps in reserve) with one set and maybe an extra if you can recover or if it’s a weak point. you especially will want to use RIR if it’s a weak point as this will help with progressive overload.

you also want to pick stable exercises and exercises that bias the actual muscle/single joint movements, for example you only need 2 sets of leg extensions to grow a set of quads, or you only need 2 sets of preacher curls to grow your bicep, picking more stable exercises on cables/ machines will result in more motor unit recruitment and this will lead to more overall growth.

avoiding redundancy.

back- frontal plane pull/ saggital plane pull/any upper back row or kelso shrug where the scapula retracts.

chest- low to high fly/pec dec or any flat press where the arms hit 90 degrees which biases the mid pec. instead of a low to high fly you can do an incline press as long as the elbows stay tucked to help bias the upper pec

legs- 2 sets of leg extensions, 2 sets hamstring curls or 1 set and 1 set of stiff leg deadlifts or a rdl variation this will also hit spinal erectors.

biceps, 2 sets of preachers, reverse curl and or hammer curl. if doing 2 movements only do one set each

abs- anything with spinal flexion

triceps- jm press/overhead extension (1 set) and a pushdown preferably uni lateral as this will increase motor unit recruitment.

calf’s- any toe press variation where it stretches at the bottom as this is where the calf has the best leverage. (1 set)

shoulders- 1 set front raise, 0-20 degrees where the front delts have best leverage. 1 set lat raise. ONLY hit rear delts if you aren’t doing an upper back row and are doing a kelso shrug as they are hit noticeably during an upper back row.

forearms- wrist flexors and wrist extension. (1 set each)

this is probably useless to most people but i just thought id put it out there as it’s the most effective way to build muscle. “just do the heavy stuff bro” 🤓🤓🤓
 
  • Love it
Reactions: Deleted member 112683
First of all pick a high frequency split, as hitting a muscle 1 time 3 times per week is more effective than 2 sets twice as a week as muscles go into atrophy every 48 hours. preferably full body (every other day) or upper lower. anything that rotates between 3x frequency or 3-4x. the number of sets listed correlate with the split choice as full body doing more than 1 set per muscle group (unless it’s a weakpoint) is redundant.

exercise selection

if your doing full body you want to hit a muscle 1-2RIR (reps in reserve) with one set and maybe an extra if you can recover or if it’s a weak point. you especially will want to use RIR if it’s a weak point as this will help with progressive overload.

you also want to pick stable exercises and exercises that bias the actual muscle/single joint movements, for example you only need 2 sets of leg extensions to grow a set of quads, or you only need 2 sets of preacher curls to grow your bicep, picking more stable exercises on cables/ machines will result in more motor unit recruitment and this will lead to more overall growth.

avoiding redundancy.

back- frontal plane pull/ saggital plane pull/any upper back row or kelso shrug where the scapula retracts.

chest- low to high fly/pec dec or any flat press where the arms hit 90 degrees which biases the mid pec. instead of a low to high fly you can do an incline press as long as the elbows stay tucked to help bias the upper pec

legs- 2 sets of leg extensions, 2 sets hamstring curls or 1 set and 1 set of stiff leg deadlifts or a rdl variation this will also hit spinal erectors.

biceps, 2 sets of preachers, reverse curl and or hammer curl. if doing 2 movements only do one set each

abs- anything with spinal flexion

triceps- jm press/overhead extension (1 set) and a pushdown preferably uni lateral as this will increase motor unit recruitment.

calf’s- any toe press variation where it stretches at the bottom as this is where the calf has the best leverage. (1 set)

shoulders- 1 set front raise, 0-20 degrees where the front delts have best leverage. 1 set lat raise. ONLY hit rear delts if you aren’t doing an upper back row and are doing a kelso shrug as they are hit noticeably during an upper back row.

forearms- wrist flexors and wrist extension. (1 set each)

this is probably useless to most people but i just thought id put it out there as it’s the most effective way to build muscle. “just do the heavy stuff bro” 🤓🤓🤓
1751508458657
 
  • +1
Reactions: averagenormie, Nihonz9 and copinglowltn
the number of sets listed correlate with the split choice as full body doing more than 1 set per muscle group (unless it’s a weakpoint) is redundant.
it's really not redundant. You get more stimulus from more sets up to like 9-10. Most people can recover from 2-3 sets in 48 hours.
or any flat press where the arms hit 90 degrees which biases the mid pec
not any. Ascending rp will always be worse than descending RP for chest.
triceps- jm press/overhead extension (1 set) and a pushdown preferably uni lateral as this will increase motor unit recruitment.
long head has best leverage with arms by the sides. Medial and lateral heads get work in presses. If you have presses in your programming just do tricep extension with arms by sides.
 
  • +1
Reactions: copinglowltn and Nihonz9
First of all pick a high frequency split, as hitting a muscle 1 time 3 times per week is more effective than 2 sets twice as a week as muscles go into atrophy every 48 hours. preferably full body (every other day) or upper lower. anything that rotates between 3x frequency or 3-4x. the number of sets listed correlate with the split choice as full body doing more than 1 set per muscle group (unless it’s a weakpoint) is redundant.

exercise selection

if your doing full body you want to hit a muscle 1-2RIR (reps in reserve) with one set and maybe an extra if you can recover or if it’s a weak point. you especially will want to use RIR if it’s a weak point as this will help with progressive overload.

you also want to pick stable exercises and exercises that bias the actual muscle/single joint movements, for example you only need 2 sets of leg extensions to grow a set of quads, or you only need 2 sets of preacher curls to grow your bicep, picking more stable exercises on cables/ machines will result in more motor unit recruitment and this will lead to more overall growth.

avoiding redundancy.

back- frontal plane pull/ saggital plane pull/any upper back row or kelso shrug where the scapula retracts.

chest- low to high fly/pec dec or any flat press where the arms hit 90 degrees which biases the mid pec. instead of a low to high fly you can do an incline press as long as the elbows stay tucked to help bias the upper pec

legs- 2 sets of leg extensions, 2 sets hamstring curls or 1 set and 1 set of stiff leg deadlifts or a rdl variation this will also hit spinal erectors.

biceps, 2 sets of preachers, reverse curl and or hammer curl. if doing 2 movements only do one set each

abs- anything with spinal flexion

triceps- jm press/overhead extension (1 set) and a pushdown preferably uni lateral as this will increase motor unit recruitment.

calf’s- any toe press variation where it stretches at the bottom as this is where the calf has the best leverage. (1 set)

shoulders- 1 set front raise, 0-20 degrees where the front delts have best leverage. 1 set lat raise. ONLY hit rear delts if you aren’t doing an upper back row and are doing a kelso shrug as they are hit noticeably during an upper back row.

forearms- wrist flexors and wrist extension. (1 set each)

this is probably useless to most people but i just thought id put it out there as it’s the most effective way to build muscle. “just do the heavy stuff bro” 🤓🤓🤓
gey
 
"
First of all pick a high frequency split, as hitting a muscle 1 time 3 times per week is more effective than 2 sets twice as a week as muscles go into atrophy every 48 hours. preferably full body (every other day) or upper lower. anything that rotates between 3x frequency or 3-4x. the number of sets listed correlate with the split choice as full body doing more than 1 set per muscle group (unless it’s a weakpoint) is redundant.

exercise selection

if your doing full body you want to hit a muscle 1-2RIR (reps in reserve) with one set and maybe an extra if you can recover or if it’s a weak point. you especially will want to use RIR if it’s a weak point as this will help with progressive overload.

you also want to pick stable exercises and exercises that bias the actual muscle/single joint movements, for example you only need 2 sets of leg extensions to grow a set of quads, or you only need 2 sets of preacher curls to grow your bicep, picking more stable exercises on cables/ machines will result in more motor unit recruitment and this will lead to more overall growth.

avoiding redundancy.

back- frontal plane pull/ saggital plane pull/any upper back row or kelso shrug where the scapula retracts.

chest- low to high fly/pec dec or any flat press where the arms hit 90 degrees which biases the mid pec. instead of a low to high fly you can do an incline press as long as the elbows stay tucked to help bias the upper pec

legs- 2 sets of leg extensions, 2 sets hamstring curls or 1 set and 1 set of stiff leg deadlifts or a rdl variation this will also hit spinal erectors.

biceps, 2 sets of preachers, reverse curl and or hammer curl. if doing 2 movements only do one set each

abs- anything with spinal flexion

triceps- jm press/overhead extension (1 set) and a pushdown preferably uni lateral as this will increase motor unit recruitment.

calf’s- any toe press variation where it stretches at the bottom as this is where the calf has the best leverage. (1 set)

shoulders- 1 set front raise, 0-20 degrees where the front delts have best leverage. 1 set lat raise. ONLY hit rear delts if you aren’t doing an upper back row and are doing a kelso shrug as they are hit noticeably during an upper back row.

forearms- wrist flexors and wrist extension. (1 set each)

this is probably useless to most people but i just thought id put it out there as it’s the most effective way to build muscle. “just do the heavy stuff bro” 🤓🤓🤓
"kelso shrug"

drop dead where u stand please
 
"

"kelso shrug"

drop dead where u stand please
it’s not gay, drop ur physique, not that it means anything im just intrigued. its legit the best way to hit the upper back because it focuses on scapula retraction. your honestly just a freak JFL.
 
it's really not redundant. You get more stimulus from more sets up to like 9-10. Most people can recover from 2-3 sets in 48 hours.

not any. Ascending rp will always be worse than descending RP for chest.

long head has best leverage with arms by the sides. Medial and lateral heads get work in presses. If you have presses in your programming just do tricep extension with arms by sides.
i was rushing this , but yeah thanks for the corrections. however i meant 1-3 sets for Each muscle group. obviously im running a FBEOD split. so i only have 1 set or 2 if its a weakpoint as i cant recover , was just stating what worked for me but appreciate it
 
This is not even related to the post
 
atom
 
  • +1
Reactions: copinglowltn
yeah dm
it’s not gay, drop ur physique, not that it means anything im just intrigued. its legit the best way to hit the upper back because it focuses on scapula retraction. your honestly just a freak JFL.
 

Similar threads

MogEater
Replies
3
Views
86
Arbuscular
Arbuscular
psikozbagimlisi
Replies
46
Views
607
szolliontaraelis
szolliontaraelis
psikozbagimlisi
Replies
54
Views
815
psikozbagimlisi
psikozbagimlisi
OneCopDayKepRopAway
Replies
3
Views
181
UMIRINBRAH?
UMIRINBRAH?

Users who are viewing this thread

Back
Top