muhammad18347
Equinox
- Joined
- Jan 21, 2025
- Posts
- 2,661
- Reputation
- 4,365
Tired of being a skinny low dimo twink?
use steroids
this thread is based on my research and my experience
Caution when buying steroids
Diet
side effects of steroids
What are steroids and what is the difference between orals and injectables?
half life of oral steroids
esters half life
other drugs people use while on steroids
injection steps
what causes injection pain
saar how can i reduce the pain?
volume of injections
how to mitigate side effects
pct
what u need to inject
please make sure you get ur bloods done i got a at home blood test from lhc there cheap and good
recents in my notifications
use steroids
this thread is based on my research and my experience
Caution when buying steroids
i think one thing that should also be added is the possibility of buying fake steroids. Don't just get them from anyone who offers them to you or from any internet site claiming to have legit and quality steroids.
Come on now, do you honestly think they will tell you they are selling fake or contaminated steroids? No they wont, they just want to scam you and take your money. Doing research on what labs are still around and what ones have a good reputation is a must before buying any type of steroids, pill form or injectable.
Who knows what it is you might be injecting into your body, if you're real lucky it might be legit, if you're not so lucky it might just be plain oil and if your luck really sucks then it could be contaminated oil that will leave you in the hospital with a blood infection or a nasty abscess.
Come on now, do you honestly think they will tell you they are selling fake or contaminated steroids? No they wont, they just want to scam you and take your money. Doing research on what labs are still around and what ones have a good reputation is a must before buying any type of steroids, pill form or injectable.
Who knows what it is you might be injecting into your body, if you're real lucky it might be legit, if you're not so lucky it might just be plain oil and if your luck really sucks then it could be contaminated oil that will leave you in the hospital with a blood infection or a nasty abscess.
Diet
Diet is probably the most important and vital tool is growing and gaining muscle/shedding fat.
With a strong diet as your backbone, the steroids will not live up to their hype. No matter what your doses and duration of steroids you are taking, it just won't be worth the time and money spent without the calories and macros behind it. The 2 literally go hand in hand.
A lack of diet will provide a lack of results, even with anabolic support. Having this experience will make cycling in the future easier and much more enjoyable.
With a strong diet as your backbone, the steroids will not live up to their hype. No matter what your doses and duration of steroids you are taking, it just won't be worth the time and money spent without the calories and macros behind it. The 2 literally go hand in hand.
A lack of diet will provide a lack of results, even with anabolic support. Having this experience will make cycling in the future easier and much more enjoyable.
side effects of steroids
first of all all drugs have side effects
your dick will not become small this is a myth
the side effects
testicular atrophy ( balls becoming smaller)
acne
hair loss
aggressiveness
kidney problems
liver problems
cholesterol problems
gyno
cardiovascular issues
insomnia
bloat
Erectile dysfunction
your dick will not become small this is a myth
the side effects
testicular atrophy ( balls becoming smaller)
acne
hair loss
aggressiveness
kidney problems
liver problems
cholesterol problems
gyno
cardiovascular issues
insomnia
bloat
Erectile dysfunction
What are steroids and what is the difference between orals and injectables?
Testosterone is the main male sex hormone which is naturally produced by the human body.
Steroids are a synthetic form of testosterone or its derivatives.
Bodybuilders mainly use testosterone. Testosterone is what you can thank for Strength and Size.
Testosterone can also assist with fat loss according to ones diet.
Test IS AND SHOULD BE THE BASE ON ALL STEROID CYCLES. Simply put; Don't cycle without it, you'll be fucked
Steroids are a synthetic form of testosterone or its derivatives.
Bodybuilders mainly use testosterone. Testosterone is what you can thank for Strength and Size.
Testosterone can also assist with fat loss according to ones diet.
Test IS AND SHOULD BE THE BASE ON ALL STEROID CYCLES. Simply put; Don't cycle without it, you'll be fucked
half life of oral steroids
Anadrol 8-9 hours
Anavar 9 hours
Dianabol 4.5 - 6 hours
Methyltestosterone 4 days
Winstrol 9 hours
proviron 12 hours
Anavar 9 hours
Dianabol 4.5 - 6 hours
Methyltestosterone 4 days
Winstrol 9 hours
proviron 12 hours
esters half life
Formate 1.5 days
Acetate 3 days
Propionate 4.5 days
Phenylpropionate 4.5 days
Butyrate 6 days
Valerate 7 days
Hexanoate 9 days
Caproate 9 days
Isocaproate 9 days
Heptanoate 10 days
Enanthate 10.5 days
Octanoate 12 days
Cypionate 12 days
Nonanoate 13.5 days
Decanoate 15days
Undecanoate 16.5 days
Acetate 3 days
Propionate 4.5 days
Phenylpropionate 4.5 days
Butyrate 6 days
Valerate 7 days
Hexanoate 9 days
Caproate 9 days
Isocaproate 9 days
Heptanoate 10 days
Enanthate 10.5 days
Octanoate 12 days
Cypionate 12 days
Nonanoate 13.5 days
Decanoate 15days
Undecanoate 16.5 days
other drugs people use while on steroids
Arimidex 3 days
Letrozole 2 days
Aromasin 27 hours
Clenbuterol 1.5 days
Clomid 5 days
Cytadren 6 hours
Ephedrine 6 hours
T3 10 hours
Letrozole 2 days
Aromasin 27 hours
Clenbuterol 1.5 days
Clomid 5 days
Cytadren 6 hours
Ephedrine 6 hours
T3 10 hours
injection steps
When choosing an injection site make sure you know what you are doing before you begin.
Injecting into an unwanted area can cause unwanted damage.
Also make sure to use proper and sterile procedures.
First thing is to chose the muscles you intend on using and research where in the muscle to inject and what length and gauge needle to use.
steps to inject
1.Clean the surface you intend to put all your supplies with an antibacterial wash.
2.Lay down a paper towel and set your supplies on it.
3.Wash your hands.
4. Use an alcohol swab or cotton ball soaked in alcohol and wipe the rubber top of the vile if that is what you are using.
5.With the cap still on the needle draw in the amount of air that you intend to draw out in oil.
6.Remove the cap and insert the needle into the rubber toper and inject the air into the vile. If you are using an amp then step 4-6 don't apply.
7. Draw out the amount of oil intended.
8. Remove the needle and put the cap back on.
9. Remove the needle from the syringe and put a new needle on. Make sure to not uncap the new one or touch it in any way since it comes sterile right from the factory. Don't even wipe it down with alcohol thinking you are doing any good because you won't be.
10. By holding the syringe upright flick it until all the air bubbles are at the top and gently push the plunger until they're all out of the syringe. Remember, air and injections don't mix.
11.Find the place where you intend to inject and thoroughly clean the entire area with an alcohol swab or a cotton ball soaked in alcohol. This will kill any microbes that might be in the area and stop them from entering your body.
12. With the area clean and all your air bubbles out of the syringe take the cap off the needle and remember to not touch it. push the needle into the skin. You may feel a little poke at first but it goes away as soon as the needles in. With the needle inserted hold on the barrel and pull back on the plunger. You don't have to pull back much. If blood appears in the end of the syringe then that means you injected in a vein so pull the needle out of the site and place a cotton ball over it since it will probably bleed a good amount. Switch the needle to a new one and repeat steps 11 and 12. If no blood appears then at a steady pace push the plunger in and try not to move the needle in or out of the site. When all the oil is out of the syringe have a cotton ball handy and pull out the needle and put the cotton ball over the site and rub it for a second.
13. Recap the needle and dispose of it
14. Clean up your area and wash ur hands.
if its ur first time it will be sore for a few days this is what happend to me
Injecting into an unwanted area can cause unwanted damage.
Also make sure to use proper and sterile procedures.
First thing is to chose the muscles you intend on using and research where in the muscle to inject and what length and gauge needle to use.
steps to inject
1.Clean the surface you intend to put all your supplies with an antibacterial wash.
2.Lay down a paper towel and set your supplies on it.
3.Wash your hands.
4. Use an alcohol swab or cotton ball soaked in alcohol and wipe the rubber top of the vile if that is what you are using.
5.With the cap still on the needle draw in the amount of air that you intend to draw out in oil.
6.Remove the cap and insert the needle into the rubber toper and inject the air into the vile. If you are using an amp then step 4-6 don't apply.
7. Draw out the amount of oil intended.
8. Remove the needle and put the cap back on.
9. Remove the needle from the syringe and put a new needle on. Make sure to not uncap the new one or touch it in any way since it comes sterile right from the factory. Don't even wipe it down with alcohol thinking you are doing any good because you won't be.
10. By holding the syringe upright flick it until all the air bubbles are at the top and gently push the plunger until they're all out of the syringe. Remember, air and injections don't mix.
11.Find the place where you intend to inject and thoroughly clean the entire area with an alcohol swab or a cotton ball soaked in alcohol. This will kill any microbes that might be in the area and stop them from entering your body.
12. With the area clean and all your air bubbles out of the syringe take the cap off the needle and remember to not touch it. push the needle into the skin. You may feel a little poke at first but it goes away as soon as the needles in. With the needle inserted hold on the barrel and pull back on the plunger. You don't have to pull back much. If blood appears in the end of the syringe then that means you injected in a vein so pull the needle out of the site and place a cotton ball over it since it will probably bleed a good amount. Switch the needle to a new one and repeat steps 11 and 12. If no blood appears then at a steady pace push the plunger in and try not to move the needle in or out of the site. When all the oil is out of the syringe have a cotton ball handy and pull out the needle and put the cotton ball over the site and rub it for a second.
13. Recap the needle and dispose of it
14. Clean up your area and wash ur hands.
if its ur first time it will be sore for a few days this is what happend to me
what causes injection pain
1. The shorter the ester, the higher the melting point
2. The concentration of the gear.
3. Injection speed.
4. Virgin muscle.
5. Volume of injection in certain muscle groups.
2. The concentration of the gear.
3. Injection speed.
4. Virgin muscle.
5. Volume of injection in certain muscle groups.
saar how can i reduce the pain?
1:1 ration w/ sterile cotton or grape seed oil.
Sleep with heating pads at night on the pin area
Pre-warm oil to let the juice disperse easier
Inject in the muscle prior to training that muscle to let the oil disperse easier
Massage thoroughly 5-8 minutes to let the oil disperse easier
Wait it out, for most the pain will subside
Rotate spot injections
Inject slow
Make sure the volume of the injection is suitable for the muscle you are pinning in.
Sleep with heating pads at night on the pin area
Pre-warm oil to let the juice disperse easier
Inject in the muscle prior to training that muscle to let the oil disperse easier
Massage thoroughly 5-8 minutes to let the oil disperse easier
Wait it out, for most the pain will subside
Rotate spot injections
Inject slow
Make sure the volume of the injection is suitable for the muscle you are pinning in.
volume of injections
Glute: Anything below 2cc.
Delt: Anything below 1cc-1.5cc
Tricep: Anything below 1cc.
Bicep: Anything below 1cc.
Trap: Anything below 1cc.
Calve: Anything below 1cc-1.5cc
Quad: Anything below 2cc
Pec: Anything below 1.5cc
Lat: Anything below 1.5cc
if ur fat then this will be different. this is what i use on me
Delt: Anything below 1cc-1.5cc
Tricep: Anything below 1cc.
Bicep: Anything below 1cc.
Trap: Anything below 1cc.
Calve: Anything below 1cc-1.5cc
Quad: Anything below 2cc
Pec: Anything below 1.5cc
Lat: Anything below 1.5cc
if ur fat then this will be different. this is what i use on me
how to mitigate side effects
hairloss: dut or ru
skin: winlevi, accutane
testicular atrophy: hcg
liver damage: nac and tudca
high e: aromasin
skin: winlevi, accutane
testicular atrophy: hcg
liver damage: nac and tudca
high e: aromasin
pct
countinue running hcg at what ever dosage u do and stop last 3 days prior to starting pct.
then u run
Clomid 100/100/50/50
4 weeks total
Nolva 20/20/20/20/20/20 6 weeks total
then u run
Clomid 100/100/50/50
4 weeks total
Nolva 20/20/20/20/20/20 6 weeks total
what u need to inject
luer lock syringes
luer lock needles i used 23g to pull and 27g to inject
injection wipes
luer lock needles i used 23g to pull and 27g to inject
injection wipes
please make sure you get ur bloods done i got a at home blood test from lhc there cheap and good
recents in my notifications
@Knight
@Skit
@Jatt
@zargo
@PSLbbc
@ltnbrownacnecel
@Skit
@Jatt
@zargo
@PSLbbc
@ltnbrownacnecel
