Titanium facial implants

Randomized Shame

Randomized Shame

Head Moderator - Randomized genetic shame
Staff
Joined
Feb 18, 2023
Posts
1,359
Reputation
2,740
When doing research for something else, I ran across this video here. I've never seen anything like this before and wasn't even sure what I was looking at at first.

Apparently they're titanium facial implants. It's normally done for facial reconstruction caused by trauma/genetics/disease/etc. Most doctors would never perform this for purely cosmetic reasons it seems, but I'm curious how many people have gotten this type of implant done purely for aesthetic reasons.

1751205235016 1751205259644 1751205273581 1751205285691

I haven't done much research on it at all, but I thought I'd share it here to see if anyone is aware of this and what their thoughts of it are and/or explain how it works.
 
  • +1
Reactions: jeff1234 and Bittersweet
Giant uses them on all his implants, im pretty sure they are more expensive and harder to place
 
  • +1
Reactions: Randomized Shame
Giant uses them on all his implants, im pretty sure they are more expensive and harder to place
Who's Giant? (Assuming he's a doctor.) And I imagine that to be the case.
 
Titanium implants are highly customisable and have very low rejection rates, so can be very good for facial implants, catering to the patients needs.

Many surgeons such as Valerio Ramieri and Mario Pagnoni use them (they also use PEEK implant material too).
 
  • +1
Reactions: Soychadcell and Randomized Shame
That video is from me. I design implants for production in either PEEK or Titanium, occasionally medpor, never silicone.

Silicone is the cheapest and most problematic facial implant material, screws cannot fixate rubber rigidly and under the masseter muscles they screws will rip through the implant and the implants move around.

PEEK and Titanium are almost interchangeable from a practical comparison standpoint.

The advantage with titanium is I can design even more details and features into the implant like muscle anchorage points to help prevent face sagging that sometimes happens after implant procedures.

135C52C3 31CA 4C88 AB2B 304BE55436EB

IMG 3610

IMG 3611

64d3ec81 5351 4fc9 aa95 dd2f751606bf


I can also combine them with plates in bimax surgeries and other cranio-maxillo-facial osteotomies.

36459757 A6BF 4149 BAE6 50BFDE7C3005
 
Last edited:
  • +1
  • Woah
Reactions: pajjeetslayer and Randomized Shame
That video is from me. I design implants for production in either PEEK or Titanium, occasionally medpor, never silicone.

Silicone is the cheapest and most problematic facial implant material, screws cannot fixate rubber rigidly and under the masseter muscles they screws will rip through the implant and the implants move around.

PEEK and Titanium are almost interchangeable from a practical comparison standpoint.

The advantage with titanium is I can design even more details and features into the implant like muscle anchorage points to help prevent face sagging that sometimes happens after implant procedures.
Do you mainly do cosmetic cases? When I did (very brief) research into titanium implants, I only found it for extreme facial reconstruction cases.
 
  • +1
Reactions: pajjeetslayer
Do you mainly do cosmetic cases? When I did (very brief) research into titanium implants, I only found it for extreme facial reconstruction cases.

It's because they are too expensive in America to do without insurance. In America surgeons do cheap surgery (and make it seem luxurious) using silicone implants for out of pocket elective surgery. If they used good materials no one could afford to get implants there.

Mostly cosmetic but also some post cancer reconstruction and pediatric syndrome reconstruction. Right now just doing the surgical planning and design, and usually assisting but not the as the surgeon. It's a collaboration. Im starting to grow that part of my work so I dont have to deal with as many ungrateful looksmax people with unrealistic expectations and personality disorders.
 
Last edited:
  • +1
Reactions: lurking truecel, pajjeetslayer, slaters and 1 other person
It's because they are too expensive in America to do without insurance. In America surgeons do cheap surgery (and make it seem luxurious) using silicone implants for out of pocket elective surgery. If they used good materials no one could afford to get implants there.

Mostly cosmetic but also some post cancer reconstruction and pediatric syndrome reconstruction. Right now just doing the surgical planning and design, and usually assisting but not the as the surgeon. It's a collaboration. Im starting to grow that part of my work so I dont have to deal with as many ungrateful looksmax people with unrealistic expectations and personality disorders.
You should blast one gram of test and see how it feels
 
  • +1
  • JFL
Reactions: ascension, perc50 and Randomized Shame
It's because they are too expensive in America to do without insurance. In America surgeons do cheap surgery (and make it seem luxurious) using silicone implants for out of pocket elective surgery. If they used good materials no one could afford to get implants there.

Mostly cosmetic but also some post cancer reconstruction and pediatric syndrome reconstruction. Right now just doing the surgical planning and design, and usually assisting but not the as the surgeon. It's a collaboration. Im starting to grow that part of my work so I dont have to deal with as many ungrateful looksmax people with unrealistic expectations and personality disorders.
Understandable. I wish you luck with your future journeys.

Have you ever had any concerns with titanium toxicity? It was also something I ran into briefly when looking up these kinds of implants.
 
  • +1
Reactions: pajjeetslayer
Understandable. I wish you luck with your future journeys.

Have you ever had any concerns with titanium toxicity? It was also something I ran into briefly when looking up these kinds of implants.
No, it's not toxic. The only potential problem is metal-on-metal joint prosthesis where microscopic particles are being grinded and released. Thats why for titanium TMJ replacement one side of the joint prosthesis is HDPE and one is titanium (either the ball or socket) but an implant with no moving parts isn't any problem.
 
  • +1
Reactions: pajjeetslayer and Randomized Shame
Jack Hanma type shit
 
  • JFL
Reactions: Randomized Shame
That video is from me. I design implants for production in either PEEK or Titanium, occasionally medpor, never silicone.

Silicone is the cheapest and most problematic facial implant material, screws cannot fixate rubber rigidly and under the masseter muscles they screws will rip through the implant and the implants move around.

PEEK and Titanium are almost interchangeable from a practical comparison standpoint.

The advantage with titanium is I can design even more details and features into the implant like muscle anchorage points to help prevent face sagging that sometimes happens after implant procedures.

View attachment 3871609
View attachment 3871610
View attachment 3871611
View attachment 3871614

I can also combine them with plates in bimax surgeries and other cranio-maxillo-facial osteotomies.

View attachment 3871615
Whats PEEK Material? Is it cheaper than Titanium?
 
  • +1
Reactions: Randomized Shame
  • +1
Reactions: Ultimate Subhuman™ and Randomized Shame
Who’s the most famous person you’ve operated on? If you could give a hint like an nba player or a Jewish banker
Netflix actor, D1 football player, and a few niche influencers (~200-500K) and little known models (~25K on insta at the time) None of them public about it.

Also rejected some plastic surgery influencers, that promote the gay and unnatural plastic aesthetic.
 
  • +1
  • Woah
Reactions: Xx_gloomy_bison_xX, slaters, pajjeetslayer and 1 other person
Netflix actor, D1 football player, and a few niche influencers (~200-500K) and little known models (~25K on insta at the time) None of them public about it.

Also rejected some plastic surgery influencers, that promote the gay and unnatural plastic aesthetic.
Woww
one last question bro wtf is this surgery?
IMG 6733
 
  • JFL
  • +1
  • Woah
Reactions: joshuaofnavi, Randomized Shame and Mainlander
No, it's not toxic. The only potential problem is metal-on-metal joint prosthesis where microscopic particles are being grinded and released. Thats why for titanium TMJ replacement one side of the joint prosthesis is HDPE and one is titanium (either the ball or socket) but an implant with no moving parts isn't any problem.
Is there any truth in titanium implants being uncomfortable in very cold or hot weather?
 
  • +1
Reactions: Randomized Shame
Is there any truth in titanium implants being uncomfortable in very cold or hot weather?
no one has told me that and it wouldn't make sense. theresnsoftntissue with warm blood supply over it - and I use titanium mesh style not solid, so it has blood supply throughout it.
 
  • +1
Reactions: kingofkings and Randomized Shame
Netflix actor, D1 football player, and a few niche influencers (~200-500K) and little known models (~25K on insta at the time) None of them public about it.

Also rejected some plastic surgery influencers, that promote the gay and unnatural plastic aesthetic.
Did they go to Turkey?
 
  • +1
Reactions: Randomized Shame
With which surgeons have you worked with exactly? any good ones in spain?
DM

No you will have to either travel to Rome or Istanbul and I am not currently taking new surgeon partnerships it's not that simple. My system isn't as easy as it looks, as if just any surgeon can put my implants/plates in with no issues. There's so many things I have to teach them and right now I dont have time.
 
  • +1
Reactions: Randomized Shame
DM

No you will have to either travel to Rome or Istanbul and I am not currently taking new surgeon partnerships it's not that simple. My system isn't as easy as it looks, as if just any surgeon can put my implants/plates in with no issues. There's so many things I have to teach them and right now I dont have time.
-How often do you do revisions? Are these revisions due to infections etc or because patients request change to achieve a different aesthetic outcome afterwards?
 
  • +1
Reactions: Randomized Shame
When doing research for something else, I ran across this video here. I've never seen anything like this before and wasn't even sure what I was looking at at first.

Apparently they're titanium facial implants. It's normally done for facial reconstruction caused by trauma/genetics/disease/etc. Most doctors would never perform this for purely cosmetic reasons it seems, but I'm curious how many people have gotten this type of implant done purely for aesthetic reasons.

View attachment 3871425View attachment 3871426View attachment 3871427View attachment 3871428

I haven't done much research on it at all, but I thought I'd share it here to see if anyone is aware of this and what their thoughts of it are and/or explain how it works.
nigga its just implants that are titanium theres literally
nothing to this:lul:
 
  • JFL
Reactions: Randomized Shame
nigga its just implants that are titanium theres literally
nothing to this:lul:
That's literally an ignorant statement. The material of implants determine a lot, like healing, potential new risks or side effects, placement, implementation, and so on. The overall gist is the same I'm sure, but there's a reason why there's different types of implants.
 
That's literally an ignorant statement. The material of implants determine a lot, like healing, potential new risks or side effects, placement, implementation, and so on. The overall gist is the same I'm sure, but there's a reason why there's different types of implants.
Shut the fuck up lmao
 
  • JFL
Reactions: Randomized Shame
-How often do you do revisions? Are these revisions due to infections etc or because patients request change to achieve a different aesthetic outcome afterwards?
This year I have about 4 revisions of my own work and we are halfway in.
- one wants to adjust infraorbital Malar implants from 3 years ago to my newer style
- one wants to adjust periorbital implants around his (successful) OBO from last year
- one wants to increase his jaw angle size he got with his bimax last year
- one case had implant infection and will need me to make new implants in 3-6 months.

Most people acknowledge they improved a lot they're just chasing perfection. Measured by the fact I've only had 2 patient remove their implants, out of hundreds, and one of those said he goes back and forth and maybe regrets removing them (he has more psychological issues/paranoia about people finding out he got plastic surgery). And as far as I know no one has ever removed and replaced their implants with anything other than replacements by myself.

While adjustment requests are quite common (maybe 10-20%) you pretty much never see someone regretting them or getting them revised by someone else.

Also pls stop going through my IG following and messaging them all, its annoying for them and many are messaging me complaining about it.
 
  • +1
Reactions: Xx_gloomy_bison_xX and Randomized Shame

Similar threads

W
Replies
12
Views
134
lurking truecel
lurking truecel
P
Replies
352
Views
20K
sorrowfulsad
sorrowfulsad
got.daim
Replies
51
Views
2K
fiye
fiye
Randomized Shame
Replies
31
Views
525
northamericanwarrio
northamericanwarrio
Acquiescence
Replies
31
Views
2K
fika2
F

Users who are viewing this thread

  • ElMismisimoHDP
Back
Top