Diy filler is the easiest shit ever (HIGH INHIB CELS GTFIH)

[KingAze]

Disclaimer: I only have hand on hand experience with High G‘ Fillers. Always Aspirate no matter what, this Is NOT medical Advice don‘t do this.

Alright, so for those of you scared todo diy filler let me give you a full run down:

Jawline: (Gonion, mandible, chin)
Very easy, The only thing you have to watch out for is the facial artery which sits infront of the gonions right on the bone (feel for a pulse) just avoid it and you should be fine as the Gonions itself and mandible dont have any major arteries. Chin technically has 2–4 arteries to watch out for, just stay 1cm away from your bottom Lip and Aspirate, simple.

Nose:
Medium, just stay in the middle of the nose, DO NOT go left or right (as those are where your MakeMeGoBlind veins are located) also from the radix the lower you go the Higher risk it gets, the tip + left and right has by far the highest risk so just watch out, but most of the time not worth it anyway. Only Area where Aspiration is not needed

Cheeks (Zygos Ant., Zygos Lat., Surrounding Area)
Easy-medium todo, the higher the bodyfat the harder to pinpoint the zygos exactly use High G‘ filler here dont do too much (1-2ml per side) but dont be afraid to go a little higher close to the Eye for that Nice Ogee Curve. The Surrounding Areas like The Tear throughs carry higher risks as most veins here run superficially, use Low G’ Filler just watch out you should be fine but your filler will migrate much easier and much faster so long term opt for fatloss and/or fatgrafts depending on the problems

Temple region:
Yeah dude I got no Idea just dont do it. The other Areas carry a significantly higher ROI, If you do want to do it, do your Own Research and then decide wether to DIY or get it done.
(Dont get Brow ridge filler it looks extremely unnatural)

Hope anyone even seen this and if so this helped you get a little more confidence.

TLDR; High G‘ Areas are usually pretty safe, injecting doesnt Hurt unlike fat dissolvers for example. Always Aspirate no matter what.

 

[KingAze]

The Surrounding Areas like The Tear throughs carry higher risks as most veins here run superficially just watch out you should be fine but your filler will migrate much easier and much faster so long term opt for fatloss and/or fatgrafts depending on the problems

Use a Low G‘ Filler

 

[khrome]

DNR past the first 2 lines

 

[teenagelovestory]

Disclaimer: I only have hand on hand experience with High G‘ Fillers. Always Aspirate no matter what, this Is NOT medical Advice don‘t do this.

Alright, so for those of you scared todo diy filler let me give you a full run down:

Jawline: (Gonion, mandible, chin)
Very easy, The only thing you have to watch out for is the facial artery which sits infront of the gonions right on the bone (feel for a pulse) just avoid it and you should be fine as the Gonions itself and mandible dont have any major arteries. Chin technically has 2–4 arteries to watch out for, just stay 1cm away from your bottom Lip and Aspirate, simple.

Nose:
Medium, just stay in the middle of the nose, DO NOT go left or right (as those are where your MakeMeGoBlind veins are located) also from the radix the lower you go the Higher risk it gets, the tip + left and right has by far the highest risk so just watch out, but most of the time not worth it anyway. Only Area where Aspiration is not needed

Cheeks (Zygos Ant., Zygos Lat., Surrounding Area)
Easy-medium todo, the higher the bodyfat the harder to pinpoint the zygos exactly use High G‘ filler here dont do too much (1-2ml per side) but dont be afraid to go a little higher close to the Eye for that Nice Ogee Curve. The Surrounding Areas like The Tear throughs carry higher risks as most veins here run superficially, use Low G’ Filler just watch out you should be fine but your filler will migrate much easier and much faster so long term opt for fatloss and/or fatgrafts depending on the problems

Temple region:
Yeah dude I got no Idea just dont do it. The other Areas carry a significantly higher ROI, If you do want to do it, do your Own Research and then decide wether to DIY or get it done.
(Dont get Brow ridge filler it looks extremely unnatural)

Hope anyone even seen this and if so this helped you get a little more confidence.

TLDR; High G‘ Areas are usually pretty safe, injecting doesnt Hurt unlike fat dissolvers for example. Always Aspirate no matter what.

bump

 

[KingAze]

Bump

 

[KingAze]

.

 

[gunterrr]

Bump

Zeig vorher nachher

 

[J99]

how can u avoid migration of filler

 

[oneofme]

Disclaimer: I only have hand on hand experience with High G‘ Fillers. Always Aspirate no matter what, this Is NOT medical Advice don‘t do this.

Alright, so for those of you scared todo diy filler let me give you a full run down:

Jawline: (Gonion, mandible, chin)
Very easy, The only thing you have to watch out for is the facial artery which sits infront of the gonions right on the bone (feel for a pulse) just avoid it and you should be fine as the Gonions itself and mandible dont have any major arteries. Chin technically has 2–4 arteries to watch out for, just stay 1cm away from your bottom Lip and Aspirate, simple.

Nose:
Medium, just stay in the middle of the nose, DO NOT go left or right (as those are where your MakeMeGoBlind veins are located) also from the radix the lower you go the Higher risk it gets, the tip + left and right has by far the highest risk so just watch out, but most of the time not worth it anyway. Only Area where Aspiration is not needed

Cheeks (Zygos Ant., Zygos Lat., Surrounding Area)
Easy-medium todo, the higher the bodyfat the harder to pinpoint the zygos exactly use High G‘ filler here dont do too much (1-2ml per side) but dont be afraid to go a little higher close to the Eye for that Nice Ogee Curve. The Surrounding Areas like The Tear throughs carry higher risks as most veins here run superficially, use Low G’ Filler just watch out you should be fine but your filler will migrate much easier and much faster so long term opt for fatloss and/or fatgrafts depending on the problems

Temple region:
Yeah dude I got no Idea just dont do it. The other Areas carry a significantly higher ROI, If you do want to do it, do your Own Research and then decide wether to DIY or get it done.
(Dont get Brow ridge filler it looks extremely unnatural)

Hope anyone even seen this and if so this helped you get a little more confidence.

TLDR; High G‘ Areas are usually pretty safe, injecting doesnt Hurt unlike fat dissolvers for example. Always Aspirate no matter what.

Tryna do gonion filler and gaining knowledge rn, DK how to spot the artery

 

[jeremyy]

Disclaimer: I only have hand on hand experience with High G‘ Fillers. Always Aspirate no matter what, this Is NOT medical Advice don‘t do this.

Alright, so for those of you scared todo diy filler let me give you a full run down:

Jawline: (Gonion, mandible, chin)
Very easy, The only thing you have to watch out for is the facial artery which sits infront of the gonions right on the bone (feel for a pulse) just avoid it and you should be fine as the Gonions itself and mandible dont have any major arteries. Chin technically has 2–4 arteries to watch out for, just stay 1cm away from your bottom Lip and Aspirate, simple.

Nose:
Medium, just stay in the middle of the nose, DO NOT go left or right (as those are where your MakeMeGoBlind veins are located) also from the radix the lower you go the Higher risk it gets, the tip + left and right has by far the highest risk so just watch out, but most of the time not worth it anyway. Only Area where Aspiration is not needed

Cheeks (Zygos Ant., Zygos Lat., Surrounding Area)
Easy-medium todo, the higher the bodyfat the harder to pinpoint the zygos exactly use High G‘ filler here dont do too much (1-2ml per side) but dont be afraid to go a little higher close to the Eye for that Nice Ogee Curve. The Surrounding Areas like The Tear throughs carry higher risks as most veins here run superficially, use Low G’ Filler just watch out you should be fine but your filler will migrate much easier and much faster so long term opt for fatloss and/or fatgrafts depending on the problems

Temple region:
Yeah dude I got no Idea just dont do it. The other Areas carry a significantly higher ROI, If you do want to do it, do your Own Research and then decide wether to DIY or get it done.
(Dont get Brow ridge filler it looks extremely unnatural)

Hope anyone even seen this and if so this helped you get a little more confidence.

TLDR; High G‘ Areas are usually pretty safe, injecting doesnt Hurt unlike fat dissolvers for example. Always Aspirate no matter what.

The thing is though, im short on fucking money.

 

[oneofme]

Disclaimer: I only have hand on hand experience with High G‘ Fillers. Always Aspirate no matter what, this Is NOT medical Advice don‘t do this.

Alright, so for those of you scared todo diy filler let me give you a full run down:

Jawline: (Gonion, mandible, chin)
Very easy, The only thing you have to watch out for is the facial artery which sits infront of the gonions right on the bone (feel for a pulse) just avoid it and you should be fine as the Gonions itself and mandible dont have any major arteries. Chin technically has 2–4 arteries to watch out for, just stay 1cm away from your bottom Lip and Aspirate, simple.

Nose:
Medium, just stay in the middle of the nose, DO NOT go left or right (as those are where your MakeMeGoBlind veins are located) also from the radix the lower you go the Higher risk it gets, the tip + left and right has by far the highest risk so just watch out, but most of the time not worth it anyway. Only Area where Aspiration is not needed

Cheeks (Zygos Ant., Zygos Lat., Surrounding Area)
Easy-medium todo, the higher the bodyfat the harder to pinpoint the zygos exactly use High G‘ filler here dont do too much (1-2ml per side) but dont be afraid to go a little higher close to the Eye for that Nice Ogee Curve. The Surrounding Areas like The Tear throughs carry higher risks as most veins here run superficially, use Low G’ Filler just watch out you should be fine but your filler will migrate much easier and much faster so long term opt for fatloss and/or fatgrafts depending on the problems

Temple region:
Yeah dude I got no Idea just dont do it. The other Areas carry a significantly higher ROI, If you do want to do it, do your Own Research and then decide wether to DIY or get it done.
(Dont get Brow ridge filler it looks extremely unnatural)

Hope anyone even seen this and if so this helped you get a little more confidence.

TLDR; High G‘ Areas are usually pretty safe, injecting doesnt Hurt unlike fat dissolvers for example. Always Aspirate no matter what.

Dude i cant feel a pulse anywhere where my gonions are, will inject there tho ina week. Wanna do as safe as possible, any tips?

 

[KingAze]

Tryna do gonion filler and gaining knowledge rn, DK how to spot the artery

Dude i cant feel a pulse anywhere where my gonions are, will inject there tho ina week. Wanna do as safe as possible, any tips?

Its like stuck to the bone best way to describe it like it runs right on the bone, infront of the muscle itself maybe feel a little higher but even then, if u aspirate you should be fine

 

[oneofme]

Its like stuck to the bone best way to describe it like it runs right on the bone, infront of the muscle itself maybe feel a little higher but even then, if u aspirate you should be fine

Isnt there still gonna come out alot of blood if u aspirate and take the needle out? Why is it a low risk area if u have a 90% chance to hit an artery

 

[KingAze]

Isnt there still gonna come out alot of blood if u aspirate and take the needle out? Why is it a low risk area if u have a 90% chance to hit an artery

If u were to hit the artery, yes while aspirating blood would come out so you just remove your needle, remove the blood and stick it back in a few mm left/right.
You truely dont have a 90% not even close to chance or hitting an artery, lets say you didnt check for arterys before starting procedure aspiration will stop your from injecting into the wrong spot

 

[KingAze]

how can u avoid migration of filler

Didnt see the message, you cant avoid it but it wont happen unless you leave it in for maybe 5 years (by then it would be naturally dissolved anyway) the only filler that ever migrates more than 0,5-1mm is a low prime filler which is used superficially

 

[weinbergg]

Didnt see the message, you cant avoid it but it wont happen unless you leave it in for maybe 5 years (by then it would be naturally dissolved anyway) the only filler that ever migrates more than 0,5-1mm is a low prime filler which is used superficially

also inject as close to the bone as possible.

 

[oneofme]

If u were to hit the artery, yes while aspirating blood would come out so you just remove your needle, remove the blood and stick it back in a few mm left/right.
You truely dont have a 90% not even close to chance or hitting an artery, lets say you didnt check for arterys before starting procedure aspiration will stop your from injecting into the wrong spot

What if i cant spot the artery i thought the artery is under the jaw
Now its infront of the gonion. Could we talk more on discord?

 

[dnrdemon]

how to prevent filler from moving

Disclaimer: I only have hand on hand experience with High G‘ Fillers. Always Aspirate no matter what, this Is NOT medical Advice don‘t do this.

Alright, so for those of you scared todo diy filler let me give you a full run down:

Jawline: (Gonion, mandible, chin)
Very easy, The only thing you have to watch out for is the facial artery which sits infront of the gonions right on the bone (feel for a pulse) just avoid it and you should be fine as the Gonions itself and mandible dont have any major arteries. Chin technically has 2–4 arteries to watch out for, just stay 1cm away from your bottom Lip and Aspirate, simple.

Nose:
Medium, just stay in the middle of the nose, DO NOT go left or right (as those are where your MakeMeGoBlind veins are located) also from the radix the lower you go the Higher risk it gets, the tip + left and right has by far the highest risk so just watch out, but most of the time not worth it anyway. Only Area where Aspiration is not needed

Cheeks (Zygos Ant., Zygos Lat., Surrounding Area)
Easy-medium todo, the higher the bodyfat the harder to pinpoint the zygos exactly use High G‘ filler here dont do too much (1-2ml per side) but dont be afraid to go a little higher close to the Eye for that Nice Ogee Curve. The Surrounding Areas like The Tear throughs carry higher risks as most veins here run superficially, use Low G’ Filler just watch out you should be fine but your filler will migrate much easier and much faster so long term opt for fatloss and/or fatgrafts depending on the problems

Temple region:
Yeah dude I got no Idea just dont do it. The other Areas carry a significantly higher ROI, If you do want to do it, do your Own Research and then decide wether to DIY or get it done.
(Dont get Brow ridge filler it looks extremely unnatural)

Hope anyone even seen this and if so this helped you get a little more confidence.

TLDR; High G‘ Areas are usually pretty safe, injecting doesnt Hurt unlike fat dissolvers for example. Always Aspirate no mahow to