DIY Rhinoplasty tutorial

itsoverformr

itsoverformr

#1 Hltn
Joined
Sep 6, 2025
Posts
701
Reputation
322
You will need the following:


https://www.amazon.com/Swiss-Patter...+3+mm&qid=1780685214&s=industrial&sr=1-1&th=1 70$


3.50-38$ find a chinese factory who makes it

Just get any anesthia needle

You can do any of theese inscions here
1780685719299
make a incison with the scalpel and lift the flap of skin backwards to reveal the muscule and tendons. Pull the two muscules on left and righ tbackward
1780685843359
Make a another inscion
1780685892154
oving the hump and remove it. Make two inscions on theese sides
1780685950302
and gently push them together as its soft carilage. Remove the inner bottom muscules
1780686012681
o get
1780686032051
then sew the muscules together tightly put the flap of skin back downwards where it was before and then sew it up properly.

This is purely for education and i do not endorse it
 

Attachments

  • 1780685933292.png
    1780685933292.png
    51.4 KB · Views: 0
  • JFL
  • +1
Reactions: D02, fraudster#1, zennn and 5 others
huh?
 
Last edited:
  • JFL
  • +1
Reactions: darodiddler and Aloof
most usless thread in the existance of threads that were meant to be usefull
 
  • +1
Reactions: 2s2f
this toooo short nig not much info you put i mean it may be possible but not enough info
 
Sepsis speedrun.
 
Nodal said:
this toooo short nig not much info you put i mean it may be possible but not enough info
Click to expand...
rhinoplasty dosent require that much info but i can remake it
 
  • +1
  • JFL
Reactions: Nodal and Purple$
Nigga are you fucking stupid
 
i bet a low inhib god would try it
 
  • +1
  • JFL
Reactions: Manletsteinberg and itsoverformr
itsoverformr said:
You will need the following:


https://www.amazon.com/Swiss-Pattern-Osteotomes-Medixplus-Sterilizer/dp/B019KSTYCC/ref=sr_1_1?dib=eyJ2IjoiMSJ9.qN_wbJz1zEWOcCiwowj44Q.15-GGRXFq5JfAvc4dkicFVJGKbPUT5jG4h74IwGLorU&dib_tag=se&keywords=Cottle+osteotomes+3+mm&qid=1780685214&s=industrial&sr=1-1&th=1 70$


3.50-38$ find a chinese factory who makes it

Just get any anesthia needle

You can do any of theese inscions here View attachment 5175789 make a incison with the scalpel and lift the flap of skin backwards to reveal the muscule and tendons. Pull the two muscules on left and righ tbackward View attachment 5175805 Make a another inscion View attachment 5175811oving the hump and remove it. Make two inscions on theese sides View attachment 5175816 and gently push them together as its soft carilage. Remove the inner bottom muscules View attachment 5175825o get View attachment 5175834 then sew the muscules together tightly put the flap of skin back downwards where it was before and then sew it up properly.

This is purely for education and i do not endorse it
Click to expand...
Enjoy the botch
 
itsoverformr said:
rhinoplasty dosent require that much info but i can remake it
Click to expand...
pretty sure there are multiple types of rhino all performed for different objectives and require a lot practice + a doc makes a mistake no problem but you got no one

if your sooo desperate atleast you should do it with other people that know alot
 
Nodal said:
pretty sure there are multiple types of rhino all performed for different objectives and require a lot practice + a doc makes a mistake no problem but you got no one

if your sooo desperate atleast you should do it with other people that know alot
Click to expand...
This one is specifically for nose hump
 
  • Woah
Reactions: Nodal
if someone actually does this they are retarded. DO NOT DO THIS, RHINOS ARE NOT THAT EXPENSIVE
 
itsoverformr said:
You will need the following:


https://www.amazon.com/Swiss-Pattern-Osteotomes-Medixplus-Sterilizer/dp/B019KSTYCC/ref=sr_1_1?dib=eyJ2IjoiMSJ9.qN_wbJz1zEWOcCiwowj44Q.15-GGRXFq5JfAvc4dkicFVJGKbPUT5jG4h74IwGLorU&dib_tag=se&keywords=Cottle+osteotomes+3+mm&qid=1780685214&s=industrial&sr=1-1&th=1 70$


3.50-38$ find a chinese factory who makes it

Just get any anesthia needle

You can do any of theese inscions here View attachment 5175789 make a incison with the scalpel and lift the flap of skin backwards to reveal the muscule and tendons. Pull the two muscules on left and righ tbackward View attachment 5175805 Make a another inscion View attachment 5175811oving the hump and remove it. Make two inscions on theese sides View attachment 5175816 and gently push them together as its soft carilage. Remove the inner bottom muscules View attachment 5175825o get View attachment 5175834 then sew the muscules together tightly put the flap of skin back downwards where it was before and then sew it up properly.

This is purely for education and i do not endorse it
Click to expand...
Bro 😭😭😭😭😭
 
itsoverformr said:
This one is specifically for nose hump
Click to expand...
either way so much more to cover and for people to even think about it you should shows before and after of someone
i think you could have formated better expanded a LLLLOOT MORE did you mention what you do for different of mistakes and errors you get did you mention 50% rule for example
 
Nodal said:
either way so much more to cover and for people to even think about it you should shows before and after of someone
i think you could have formated better expanded a LLLLOOT MORE did you mention what you do for different of mistakes and errors you get did you mention 50% rule for example
Click to expand...
If you accidentally do a mistake its over
 
  • JFL
Reactions: Nodal
itsoverformr said:
You will need the following:


https://www.amazon.com/Swiss-Pattern-Osteotomes-Medixplus-Sterilizer/dp/B019KSTYCC/ref=sr_1_1?dib=eyJ2IjoiMSJ9.qN_wbJz1zEWOcCiwowj44Q.15-GGRXFq5JfAvc4dkicFVJGKbPUT5jG4h74IwGLorU&dib_tag=se&keywords=Cottle+osteotomes+3+mm&qid=1780685214&s=industrial&sr=1-1&th=1 70$


3.50-38$ find a chinese factory who makes it

Just get any anesthia needle

You can do any of theese inscions here View attachment 5175789 make a incison with the scalpel and lift the flap of skin backwards to reveal the muscule and tendons. Pull the two muscules on left and righ tbackward View attachment 5175805 Make a another inscion View attachment 5175811oving the hump and remove it. Make two inscions on theese sides View attachment 5175816 and gently push them together as its soft carilage. Remove the inner bottom muscules View attachment 5175825o get View attachment 5175834 then sew the muscules together tightly put the flap of skin back downwards where it was before and then sew it up properly.

This is purely for education and i do not endorse it
Click to expand...
@zennn :ROFLMAO:
 
  • JFL
Reactions: zennn
itsoverformr said:
You will need the following:


https://www.amazon.com/Swiss-Pattern-Osteotomes-Medixplus-Sterilizer/dp/B019KSTYCC/ref=sr_1_1?dib=eyJ2IjoiMSJ9.qN_wbJz1zEWOcCiwowj44Q.15-GGRXFq5JfAvc4dkicFVJGKbPUT5jG4h74IwGLorU&dib_tag=se&keywords=Cottle+osteotomes+3+mm&qid=1780685214&s=industrial&sr=1-1&th=1 70$


3.50-38$ find a chinese factory who makes it

Just get any anesthia needle

You can do any of theese inscions here View attachment 5175789 make a incison with the scalpel and lift the flap of skin backwards to reveal the muscule and tendons. Pull the two muscules on left and righ tbackward View attachment 5175805 Make a another inscion View attachment 5175811oving the hump and remove it. Make two inscions on theese sides View attachment 5175816 and gently push them together as its soft carilage. Remove the inner bottom muscules View attachment 5175825o get View attachment 5175834 then sew the muscules together tightly put the flap of skin back downwards where it was before and then sew it up properly.

This is purely for education and i do not endorse it
Click to expand...
Nigha pasted his internal dih pics and said it’s a rhino :forcedsmile:
 
  • JFL
Reactions: zennn
itsoverformr said:
If you accidentally do a mistake its over
Click to expand...
even pros do it
i think it genunliy has 0 roi so many methods you could fix it diy rhino migth not be it
i think it MAYBE possible if you had all the tool and real smart friends and prcticed and shit but at that point just get a rhino
besides so much complications
 
  • +1
  • JFL
Reactions: Paul.jnxy and itsoverformr
works
before
Retouch 2026060521120849


after
20260605 210914
 
  • JFL
  • +1
Reactions: zennn and Paul.jnxy
Nodal said:
even pros do it
i think it genunliy has 0 roi so many methods you could fix it diy rhino migth not be it
i think it MAYBE possible if you had all the tool and real smart friends and prcticed and shit but at that point just get a rhino
besides so much complications
Click to expand...
Unrealistic this would work on yourself tf
 
  • +1
Reactions: Nodal
You must log in or register to reply here.

Similar threads

K
rhinoplasty
Replies
4
Views
32
Whatever
Whatever
Tezzus
CLAV RHINOPLASTY NOW
Replies
15
Views
232
ltn_looksminner
ltn_looksminner
I
ghkcu diy
Replies
2
Views
53
ascendingpath
ascendingpath
kayeead
DIY lip corner cutting
Replies
2
Views
82
6”3neartyronelite
6”3neartyronelite
vanshsengar11
Way to convince your parents for rhinoplasty
Replies
0
Views
22
vanshsengar11
vanshsengar11

Users who are viewing this thread

  • owdeq
  • holyhair_holyhair
  • ... and 1 more.
    • Total: 7 (Looksmaxers: 3, Bluepillers: 4)
    Back
    Top