Don't want to do under eye filler? TRY PCL SCREW THREADS

[citydihltn]

diying this might be retarded

 

[zurrity]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis and blindness.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

under eye fat graft mogs. although a bit gets absorbed im not sure how effective it really is

 

[Iblame2023]

My high effort king

 

[Aoki33]

can i do the same thing for the corners of my lip to extend the size of it
or im just stupid

 

[VrillFatNoob24]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis and blindness.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

dnr

 

[Katiq]

mirin will probably do this in the summer good read

 

[blonde slayer]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis and blindness.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

Would really like to see more detailed guide, as fat grafting isn't financially feasible currently

 

[saumya_19]

Just drink water bro

 

[strongmtn_]

Sayori's simplified PCL guide

What to expect before reading?
Expect a digestible thread about PCL threads and how to use them for under eyes
View attachment 4993698

Table of contents​

What are PCL screw threads & general info about them

Why PCL threads over ha filler

How to diy

What are PCL screw threads & general info about them
What are PCL screw threads:
PCL screw threads are bioresorbable, spiral shaped threads made from polycaprolactone, used in thread lifts to stimulate collagen and lift sagging skin.

Types of PCL threads:

1. Mono threads
2. Cog threads
3. Screw threads

Mono threads:
Smooth sutures that help with brightness, skin elasticity, and skin rejuvenation by stimulating collagen production

Cog threads:
“These threads have barbs that latch into your skin like small fish hooks, to provide support and lift parts of your face.”

Screw Threads:
Made up of one or two intertwined threads, and these are used to help restore volume to sunken parts of your skin. As well as improve wrinkles.

View attachment 4993693

Why PCL screws over PDO screws and PPLA screws:

1. Biodegradation period:
PCL’s last around 16-24 months, PDO’s last 6-8 months and lastly PLLA’s 14-18 months

2. Aesthetic Duration:
PCL’s last around 24-26 months, PDO’s last 6-12 months and lastly PLLA’s 18-24 months

3. Flexibility:
PCL’s out mog the other two in this category hard which is a good thing since we are doing the under eye which has thin mobilish skin

View attachment 4993694

Why PCL threads over ha filler
Safety:
PCL threads are much safer than a filler which has a risk of a vascular occlusion which leads to necrosis and blindness.
View attachment 4993695

Skill entry level:
Under eye Ha filler is a far harder procedure to do as compared to PCl threads. You need more anatomical knowledge for Ha filler and more advanced techniques.

Conclusion:
PCL screw threads are a great entry level diy for people suffering with hollow undereyes. No risk for a vascular occlusion is worth it.

How to diy
Needs:

1. 25mm 30g PCL SCrew threads
2. Alcohol prep pads

Optional:

1. Topical lidocaine
2. Arnica gel

1. Apply lidocaine and leave it on for 5 min, times up remove it with a tissue then disinfect area with the alcohol prep pads

2. Insert the PCL in a 45 degree angle like shown below, repeat the marking twice ( stay within the dermis and sub q layer )
View attachment 4993697
View attachment 4993699
View attachment 4993696

3. In order to remove the threads, screw them while applying pressure to the needle tip directly through the skin. Then, slowly move them out while screwing.

4. Clean the site with alcohol prep pads and if you like add some arnica gel to reduce bruising risk.

Final note:
If you want deeper information then ask me and if this gets over 50 reps ill make a deep dive into these. I made this simple and digestible thanks to @TemporaryName . Don't let the simple guide fool you its good enough to perform this procedure.

Good injection video:


Tags:
@Hernan @illusion @goku21 @Resistance. @Orka

im a infracel