Jatt
See you next year
- Joined
- Jan 19, 2025
- Posts
- 16,053
- Reputation
- 41,104
- OP
- #51
You can build them in the gym retardyk that abs is genetics
Jatt
D
Deleted member 59162
Truth, no matter how bitter, is better than a lie
- Joined
- Jan 11, 2024
- Posts
- 2,191
- Reputation
- 2,236
ur abs can look like shit thoYou can build them in the gym retard
seven?
god's lonely man
- Joined
- Feb 28, 2025
- Posts
- 2,788
- Reputation
- 3,464
good thread
D
Deleted member 110192
Pharmaceuticals enthusiast, maximizing MPS
- Joined
- Dec 1, 2024
- Posts
- 18,526
- Reputation
- 41,114
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guidepeptidedosages.com
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.primepeptides.co
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
Holy fuck, mirin BOTB
D
Deleted member 81760
from lookism.net
- Joined
- Jul 16, 2024
- Posts
- 3,591
- Reputation
- 6,500
state of BOTB
emogymmaxx
ascending
- Joined
- Sep 10, 2024
- Posts
- 3,643
- Reputation
- 5,225
every time i see this at top of botb i get mad i didn't make it bc this is the most basic info ive ever read, mirin
Jatt
See you next year
- Joined
- Jan 19, 2025
- Posts
- 16,053
- Reputation
- 41,104
- OP
- #57
That’s why I made it cuz there wasent one to teach new people how to inject
Edgarpill
mirin
- Joined
- Jun 9, 2024
- Posts
- 942
- Reputation
- 1,394
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
is the speeding up cancer cells shit cope?
Jatt
See you next year
- Joined
- Jan 19, 2025
- Posts
- 16,053
- Reputation
- 41,104
- OP
- #59
All cope by big pharma
GoErOnFoids
I brought whisky
- Joined
- Jul 13, 2025
- Posts
- 889
- Reputation
- 889
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
Incredible hiding
Its0ver_r0pe$
Roped
- Joined
- Jun 17, 2025
- Posts
- 543
- Reputation
- 582
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
Amazing
sinister.
Iron
- Joined
- May 25, 2025
- Posts
- 63
- Reputation
- 26
oh my god bruh shut the fuck up and just do test and hgh stop wasting your time and money on peptides
Jatt
See you next year
- Joined
- Jan 19, 2025
- Posts
- 16,053
- Reputation
- 41,104
- OP
- #63
sinister.
Iron
- Joined
- May 25, 2025
- Posts
- 63
- Reputation
- 26
WinstrolWhat if a brah wants to lose fat
Reta
What if a brah wants good skin
Ghk-cu
Tren
skin is irrelevent to this but sure if you want to take peptides for good skin sure
side effects are cope and not real
gokorg
Isotretinoin coming soon
- Joined
- Mar 8, 2025
- Posts
- 92
- Reputation
- 100
Nuke your liver and brain just to get at a low bf % theory
Chico
Yo Chico
- Joined
- Apr 22, 2022
- Posts
- 157
- Reputation
- 157
Btw, it doesn't matter how quickly you inject the bac water into the peptide, nor does it matter if you shake it.
sinister.
Iron
- Joined
- May 25, 2025
- Posts
- 63
- Reputation
- 26
take peptides like a nigger and waste your money theory
side effects are overexagerated
brotato78
Master
- Joined
- Apr 13, 2025
- Posts
- 1,646
- Reputation
- 2,373
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
if u need an org thread to figure this out dont touch any injectable
MrHeffer
Iron
- Joined
- Aug 24, 2025
- Posts
- 39
- Reputation
- 63
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
Jean Paul Gaultier method
hasba1feuj
2026 ascender
- Joined
- Apr 23, 2024
- Posts
- 1,533
- Reputation
- 1,345
bro HOW THE FUCK is this on botb its the most normal thread ever nigga
@Orc please do some threads or bring back old users what the fuck is going on
i remember a time where a botb thread was a post with a minimum of 15 incomprehensible terms
(@Jatt not hating on u btw)
@Orc please do some threads or bring back old users what the fuck is going on
i remember a time where a botb thread was a post with a minimum of 15 incomprehensible terms
(@Jatt not hating on u btw)
Jatt
See you next year
- Joined
- Jan 19, 2025
- Posts
- 16,053
- Reputation
- 41,104
- OP
- #71
A
adarsh arya
Silver
- Joined
- May 24, 2025
- Posts
- 565
- Reputation
- 215
is sa a good source to buy gh ?
A
adarsh arya
Silver
- Joined
- May 24, 2025
- Posts
- 565
- Reputation
- 215
indian boys winning finally got one in botb more to go
BHARAT MATA KI JAI!!!
BHARAT MATA KI JAI!!!
Cuz no one has made a guide on this yet
what colour is your botb
rottinghercorpse
Sacra
- Joined
- Oct 2, 2024
- Posts
- 55
- Reputation
- 28
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
Pretty easy to know but good post nonetheless
oijuyfdtrg
Gold
- Joined
- Aug 12, 2024
- Posts
- 821
- Reputation
- 965
shake it like a polaroid picture
jeremyy
moving on soon
- Joined
- Oct 22, 2024
- Posts
- 6,673
- Reputation
- 7,373
MIRIN BRO!
damiandyrbusch
ddig
- Joined
- Nov 24, 2024
- Posts
- 42
- Reputation
- 32
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
I thought i am the only one who knows the jean paul gautier method jfl
mewzilla
SHAKE IT LIKE ITS HEAT OVERDRIVE!!!
- Joined
- Jun 13, 2025
- Posts
- 1,227
- Reputation
- 1,008
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of theThread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
can i snort it and gain tremendous aura?
barambo
46th president of the united states | GTC INV |
- Joined
- Jul 21, 2025
- Posts
- 1,688
- Reputation
- 5,535
MaracasMogs
- Joined
- Jan 16, 2025
- Posts
- 2,251
- Reputation
- 3,928
good thread jattYou can build them in the gym retard
buddy
Iron
- Joined
- Dec 14, 2024
- Posts
- 228
- Reputation
- 254
is that you in the videos?
ssleepy
wigger
- Joined
- May 19, 2025
- Posts
- 122
- Reputation
- 124
one way of hiding syringes is just putting them in the LV shoe bags
ssleepy
wigger
- Joined
- May 19, 2025
- Posts
- 122
- Reputation
- 124
hgh is also a peptide you retard
sansero
Foidhater
- Joined
- Dec 21, 2024
- Posts
- 57
- Reputation
- 45
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
The Bay Harbor Peptide Hider haha
good post
D
Doesitmatter?
Master
- Joined
- Jul 30, 2024
- Posts
- 1,644
- Reputation
- 1,587
Have you injected any pepdite yourself?
Jatt
See you next year
- Joined
- Jan 19, 2025
- Posts
- 16,053
- Reputation
- 41,104
- OP
- #86
Yes look at the video that’s me
I’ve used Reta and glow blend so far
The once where I’m injecting into my stomach
Orka
Enlighten me
- Joined
- Sep 8, 2024
- Posts
- 8,427
- Reputation
- 27,756
blablabla give me home page
MaracasMogs
- Joined
- Jan 16, 2025
- Posts
- 2,251
- Reputation
- 3,928
was it painful
Jatt
See you next year
- Joined
- Jan 19, 2025
- Posts
- 16,053
- Reputation
- 41,104
- OP
- #89
Nah just stings a lilwas it painful
Glow hurt after injecting but that’s a common side effect
MaracasMogs
- Joined
- Jan 16, 2025
- Posts
- 2,251
- Reputation
- 3,928
Are you happy with the results ?Nah just stings a lil
Glow hurt after injecting but that’s a common side effect
mumbai.chad
true adam (in the deepest darkest alley in mumbai)
- Joined
- Jul 19, 2025
- Posts
- 58
- Reputation
- 31
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
goated
MaracasMogs
- Joined
- Jan 16, 2025
- Posts
- 2,251
- Reputation
- 3,928
Where did you source it ? I can’t find any source for glow in Europe.Nah just stings a lil
Glow hurt after injecting but that’s a common side effect
Jatt
See you next year
- Joined
- Jan 19, 2025
- Posts
- 16,053
- Reputation
- 41,104
- OP
- #93
Yeah dripped 8kg on Reta and glow was ok but I need more I will do for 2 months next time I order
Jatt
See you next year
- Joined
- Jan 19, 2025
- Posts
- 16,053
- Reputation
- 41,104
- OP
- #94
I bought domestic but ssa should be better
MaracasMogs
- Joined
- Jan 16, 2025
- Posts
- 2,251
- Reputation
- 3,928
Ok thanks
pumpeduppecs
Diamond
- Joined
- Jan 10, 2023
- Posts
- 1,450
- Reputation
- 847
Does it have to be somewhere on that chart? I’ve been pinching the skin on my shoulder and injecting there
houseonfire
𓆩𓆪
- Joined
- Sep 5, 2025
- Posts
- 97
- Reputation
- 32
book marked, amazing thread
houseonfire
𓆩𓆪
- Joined
- Sep 5, 2025
- Posts
- 97
- Reputation
- 32
anyone know if buying peptides in aus is reliable? cause idk if my shit will get seized or not
Defiray
Iron
- Joined
- Jul 9, 2025
- Posts
- 144
- Reputation
- 52
Thread OST:
Reconstitution:
Why we reconstitute:
We reconstitute peptides because they arrive lyophilized, which is a powder form used for stability during shipping and storage.
Example:
View attachment 4024313
We use bacteriostatic water to reconstitute.
Most peptides need around 1-3mL of bacteriostatic water.
We only need to reconstitute ONCE per peptide.
Example:
Let's say we have 10mg of
Retatrutide.
And I want to inject 2mg each time.
I will put 1.0mL of bacteriostatic water.
View attachment 4025024
You should have an idea of how much you are planning on injecting.
If not, refer to this website:
Peptide Dosages How‑To Guide (2025)
Educational Peptide Dosages | Ultimate 2025 How To Guide
Required items:
1. Needles
View attachment 4024418
2. Alcohol wipes
View attachment 4024424
3. Bacteriostatic water
View attachment 4024403
I couldn't find it on Amazon, but your supplier you buy peptides from should have it.
How to reconstitute:
I forgot to record the reconstitution, but I followed this video.
Steps:
1. Remove the caps (throw away the cap you don't put it back on).
2. Wipe the top of the peptide vial with an alcohol wipe.
View attachment 4024513
3. Take off the needles' orange protective cover on both sides and inject into the bacteriostatic water.
View attachment 4024509
4: Pull back to the amount you will need. This needle is 100 units, which equals 1ml of bacteriostatic water
View attachment 4024510
Step 5: Pull the needle out of the bacteriostatic water and inject it into your peptides.
Make sure to let go slowly at an angle, like shown in the video, to avoid bubbles, and pull out the plunger like he did in the video.
It shouldn’t take long for it to go from powder to liquid just swirl it around gently.
Throw out the bacteriostatic water if no more peptides need reconstituting.
Bacteriostatic water expires after 28 days from opening in the fridge.
Put the peptides back in the fridge and take them out when going to inject.
Injecting:
Gather items:
1. Peptide/s
2. Syringe/s
3. Alcohol wipe/s
4. Rubbish bin
View attachment 4024711
How to inject:
1. Wash your hands and wipe the top of the peptide with an alcohol wipe.
2. Wipe the area where you will inject with a wipe (I use the same wipe, but the other side).
Use this diagram to see where you can inject (I only inject in my stomach, but I swap areas so one day left, one day right).
View attachment 4025009
3. Take off the cover of the syringe and inject into your peptide, and get your desired dose.
Pull back more if there are bubbles and push back in for the exact dose.
4. Pinch some fat and inject at around a 45-degree angle.
View attachment 4024727
View attachment 4025008
Video demonstration:
View attachment 4024710
Use different syringe every time injecting.
Bonus:
Hiding:
I have constructed a cylinder made out of duct tape and double-sided duct tape to hide the peptides inside my fridge.
View attachment 4024982View attachment 4024714
And I am hiding my syringes, etc, in this bag here.
View attachment 4024984
View attachment 4024983
Peptide calculator:
Peptide Calculator - Prime Peptides™
Peptide Calculator Use our Peptide Calculator below to calculate accurate dosages for administering peptides using a syringe. Simply select your parameters, and our calculator will give you the results.
Peptide tracking:
This app you can track your peptides and it has notification feature.
View attachment 4025030
View attachment 4025027
EDIT:
I just realized this app is now paid just today somehow, it was working fine past 2 weeks.
So I would recommend setting up an reminder on your phone every time you need to inject and a simple table on notes to track every dose you need to do.
Your idian/chinese peptide are just water
brainregeneration
Iron
- Joined
- Mar 11, 2022
- Posts
- 27
- Reputation
- 26
Good thread. Thanks for the link to the peptides calculator.
Similar threads
MogsMost
