I measured my facial ratios

[JustCallMeKash]

Your measurements vs stated ideals​

Measurement	Yours​	Ideal​
FWHR	1.84​	1.80+​
Lower face / Full face ratio	0.64​	0.62+​
Midface ratio	1.08​	1.00–1.10​
Mouth / Nose ratio	1.33​	1.50–1.62​
Lower / Upper lip ratio	1.04​	1.62​
Chin / Philtrum ratio	1.61​	2.00–2.25​
Bizygomatic / Bigonial width	1.13​	1.35​
ESR	0.47​	0.45–0.47​
EME	46.6°​	47–50°​
Positive canthal tilt (PCT)	8.4°​	4–6°​
PFL	3​	3–3.4​
Forehead height	2.75 fingers​	3 fingers​
Upper facial third	0.76​	Equal to other thirds​
Middle facial third	0.79​	Equal to other thirds​
Lower facial third	0.92​	Equal to other thirds​
1st facial fifth	0.43​	Equal to other fifths​
2nd facial fifth	0.49​	Equal to other fifths​
3rd facial fifth (nose)	0.64​	Equal to other fifths​
4th facial fifth	0.49​	Equal to other fifths​
5th facial fifth	0.41​	Equal to other fifths​

I got these numbers from an old 2019 thread all the new ones had way too many shit to measure and im lazy I jst want a general outline of my rating and what specifically on my face needs to be fixed

Btw I dont know how to get my rating out of this the guide didnt mention it I have the measurements now what

 

[Knight]

Midface ratio

1.08​

1.00–1.10​

mfr range is like 0.95-1.03

 

[Knight]

Btw I dont know how to get my rating out of this the guide

these ratios only tell you abit of your front harmony. A full rating encompasses side harmony via ratios along with full front harmony via ratios + dimorphism + misc + angularity

 

[Knight]

FWHR

1.84​

1.80+​

ideal for 1.9-2.05 too for reference

 

[JustCallMeKash]

these ratios only tell you abit of your front harmony. A full rating encompasses side harmony via ratios along with full front harmony via ratios + dimorphism + misc + angularity

My dimo is good, misc is shit I have a better side profile than front so im too lazy to measure it and ppl only care about front regardless

 

[JustCallMeKash]

I actually posted a pic of my face in my previous post could u give me a rate

mfr range is like 0.95-1.03

 

[Knight]

I actually posted a pic of my face in my previous post could u give me a rate

for sure

 

[Knight]

tag me in it

 

[Rc3jtree]

mfr range is like 0.95-1.03

0.95 is horse tier. 0.98-1.10 is acceptable and above 1.0 is ideal.

 

[Knight]

0.95 is horse tier. 0.98-1.10 is acceptable and above 1.0 is ideal.

0.95 is not horse tier by any means, fuck are you talking about anything even higher than 1.03 would be classed as too compact and a feminised midface, infact for females too a midface of 1.1 would be unideal

 

[Rc3jtree]

0.95 is not horse tier by any means

Still too long.

1.03 would be classed as too compact and a feminised midface

Yeah, that’s why 1.0-1.03 is ideal. Long midface is less ideal than compact midface however, and I said the range 0.98-1.10 is acceptable.

 

[Knight]

Still too long.

Yeah, that’s why 1.0-1.03 is ideal. Long midface is less ideal than compact midface however, and I said the range 0.98-1.10 is acceptable.

0.95-1.03 is the ideal t1 range buddy go check again, 1.1 is deffo not acceptable, only person to still look good with a 1.03+ kind of a midface is barrett and he has everything else

 

[JustCallMeKash]

0.95-1.03 is the ideal t1 range buddy go check again, 1.1 is deffo not acceptable, only person to still look good with a 1.03+ kind of a midface is barrett and he has everything else

Ngl amma ascend again n get deep into the facial ratios shit tf yall tlking about t1 like yall r rating shows

 

[Rc3jtree]

0.95-1.03 is the ideal t1 range buddy go check again, 1.1 is deffo not acceptable, only person to still look good with a 1.03+ kind of a midface is barrett and he has everything else

that’s why 1.0-1.03 is ideal

 

[Knight]

Ngl amma ascend again n get deep into the facial ratios shit tf yall tlking about t1 like yall r rating shows

t1 is the ideal, it goes from tier 1 to 7, 7 being the worst 0/10

 

[Knight]

and I said the range 0.98-1.10 is acceptable

yh 1.03+ isnt in the ideal range, im specifically replying to ur claim of 1.1 being within the ideal

 

[JustCallMeKash]

t1 is the ideal, it goes from tier 1 to 7, 7 being the worst 0/10

I have a question how come my lowerthird is the longest part of my facial third even tho my mandible is recessed lile that makes no sense to me

 

[JustCallMeKash]

I have a question how come my lowerthird is the longest part of my facial third even tho my mandible is recessed lile that makes no sense to me

My chin to philtrum ratio is shit too so hpw ia it longer than the other areas

 

[Knight]

I have a question how come my lowerthird is the longest part of my facial third even tho my mandible is recessed lile that makes no sense to me

your mandible being recessed slightly doesnt effect your facial height, facial thirds and jaw projection are two completely different things

one is vertical height one is horizontal projection

 

[Knight]

My chin to philtrum ratio is shit too so hpw ia it longer than the other areas

rep my replies brah

 

[Gudlifer]

ugly ass nigga

Face Shape​

• Upper Third: 33.4% (30.0-32.0%)
• Middle Third: 32.7% (31.4-33.4%)
• Lower Third: 33.9% (33.9-37.0%)
• TFWHR: 1.36x (1.33-1.37x)
• Bitemporal Width: 79.1% (86.5-92.5%)
• FWHR: 1.87x (1.95-2.05x)
• Midface: 1.01x (0.98-1.02x)
• Cheekbone Height: 83.3% (83.0%-100.0%)

Eyes​

• Brow Length: 77.0% (70.0-80.0%)
• Eyebrow Low Setedness: 92.7% (0.0-50.0%) (mid-set)
• Eyebrow Tilt: 8.5º (6.5-11.0º)
• Canthal Tilt: 7.5º (6.0-7.7º)
• ESR: 46.0% (45.7-46.8%)
• Eye Aspect: 3.19x (3.00-3.70x)
• Intercanthal Distance: 1.08x (0.90-1.00x)

Nose​

• Nose Bridge to Nose Width: 2.01x (2.05-2.15x)
• Intercanthal-Nasal Width: 0.95x (1.00-1.20x)
• Ipsilateral Alar Angle: 88.9º (86.5-92.5º)
• Deviation of IAA and JFA: 1.2º (0.0-2.5º)

Jaw​

• Jaw Frontal Angle: 87.7º (86.5-92.5º)
• Jaw Slope: 145.9º (140.0-142.5º)
• Bigonial Width: 85.4% (87.5-91.5%)
• Chin to Philtrum: 2.54x (2.10-2.50x)
• Lower Third Proportion: 33.1% (31.0-33.5%)

Mouth​

• Interpupillary-Mouth Width: 0.74x (0.80-0.90x)
• Mouth to Nose Width: 1.41x (1.40-1.50x)
• Lower to Upper Lip: 1.50x (1.60-1.90x)

Other​

• Ear Protrusion: 13.2% (8.0-12.0%)
• Neck Width: 95.2% (92.0-98.0%)

 

[JustCallMeKash]

your mandible being recessed slightly doesnt effect your facial height, facial thirds and jaw projection are two completely different things

one is vertical height one is horizontal projection

Mmmmmmmmmm so my chin to philtrum can increase dramitcally if I project my chin forqard without it changing my lower third height?

 

[Knight]

Mmmmmmmmmm so my chin to philtrum can increase dramitcally if I project my chin forqard without it changing my lower third height?

brotha what are you smoking, chin to philtrum ratio is taken from the front so its based on your face height, you projecting your chin forward changes nothing when it comes to that ratio

 

[Rc3jtree]

yh 1.03+ isnt in the ideal range, im specifically replying to ur claim of 1.1 being within the ideal

the range 0.98-1.10 is acceptable.

1.0-1.03 is ideal.

 

[JustCallMeKash]

brotha what are you smoking, chin to philtrum ratio is taken from the front so its based on your face height, you projecting your chin forward changes nothing when it comes to that ratio

What if i smash tf out of my chin from underneath

 

[JustCallMeKash]

Im fixing these ratios no matter what

 

[Knight]

@Rc3jtree just gonna leave it at this, ideal range for mfr is 0.95-1.03 yes the range can exceed this but it will reduce in tiers, the above stated range i mentioned is T1

 

[JustCallMeKash]

brotha what are you smoking, chin to philtrum ratio is taken from the front so its based on your face height, you projecting your chin forward changes nothing when it comes to that ratio

So Ive been brutalizing my chin for the past 2 weeks for nothing 🫩

 

[JustCallMeKash]

@Rc3jtree just gonna leave it at this, ideal range for mfr is 0.95-1.03 yes the range can exceed this but it will reduce in tiers, the above stated range i mentioned is T1

Law

 

[Knight]

What if i smash tf out of my chin from underneath

207/97=2.134
im guessing you want a taller chin to philtrum ratio

 

[JustCallMeKash]

View attachment 5642834
207/97=2.134
im guessing you want a taller chin to philtrum ratio

Yh my chin looks small

 

[JustCallMeKash]

View attachment 5642834
207/97=2.134
im guessing you want a taller chin to philtrum ratio

I wanna look like this guy yes I know its impossinble but I wanna get as close as possible

 

[Knight]

View attachment 5642835
I wanna look like this guy yes I know its impossinble but I wanna get as close as possible

u do realise ur ctp is ideal right?

 

[JustCallMeKash]

View attachment 5642835
I wanna look like this guy yes I know its impossinble but I wanna get as close as possible

Like u see how his shi jst looks square n projected n so fuucking sexy no homo

 

[Knight]

Chin / Philtrum ratio

1.61​

2.00–2.25​

whatever AI u used to rate u was wrong

 

[JustCallMeKash]

u do realise ur ctp is ideal right?

How?

Well if its ideal I wont touch it but I ddf want a strong looking chin

 

[JustCallMeKash]

whatever AI u used to rate u was wrong

I measured it myself took 1 hour too

 

[Knight]

How?

Well if its ideal I wont touch it but I ddf want a strong looking chin

View attachment 5642834
207/97=2.134
im guessing you want a taller chin to philtrum ratio

^^^

 

[Knight]

I measured it myself took 1 hour too

brotha i did it for you in 10 secs