INSTANTLY fix Chin Recession | A Guide to DIY Chin Filler + **INJECTION VIDEOS**

h76 said:
Yuh ima be real LSD is kind of a shitty high, the best highs ive ever had were shrooms
Click to expand...
get us 10kg of shrooms

u pay
 
Legend for the work you put into this
Followed
 
  • Love it
Reactions: Orka
Orka said:
get us 10kg of shrooms

u pay
Click to expand...
orka!!

u have mentioned planning to do gonion fillers correct?? browsing filler forums and communitys as well as watching and reading a fuckton of artery information for the past hours. i think its the *easiest* area to diy because of the lack of arterys in the bone region at all(low risk). obviously i mean the gonial angle not mid mandible as thats where the carotid artery is(i hope no1 is retarded enough to do that ngl).

when will u do urs?? and how many ml

im gonna browse more pre protocol/post protocol methods and will start practicing soon(ordered alrdy)
 
  • +1
Reactions: Orka
dawooddX said:
orka!!

u have mentioned planning to do gonion fillers correct?? browsing filler forums and communitys as well as watching and reading a fuckton of artery information for the past hours. i think its the *easiest* area to diy because of the lack of arterys in the bone region at all(low risk). obviously i mean the gonial angle not mid mandible as thats where the carotid artery is(i hope no1 is retarded enough to do that ngl).

when will u do urs?? and how many ml

im gonna browse more pre protocol/post protocol methods and will start practicing soon(ordered alrdy)
Click to expand...
Jaw is not overall the easiest

You're confusing risk with difficulty, chin is low risk and low difficulty, Jaw is low risk but you need precision and technique in order not to botch yourself and make your face lopsided, especially since you're working with a larger surface area, more space to mess up

I'm not sure how much I'll do on my Jaw, but I will do my Jaw eventually!
 
  • +1
Reactions: dawooddX
Orka said:
Jaw is not overall the easiest

You're confusing risk with difficulty, chin is low risk and low difficulty, Jaw is low risk but you need precision and technique in order not to botch yourself and make your face lopsided, especially since you're working with a larger surface area, more space to mess up

I'm not sure how much I'll do on my Jaw, but I will do my Jaw eventually!
Click to expand...
yes! i worded it a bit off. im fully aware. thats why im gonna practice a fuckton before thinking abt finally attempting it.

the midface area is actually insanely risky. i realize how bgm is genuienly insane in the head to think abt attempting it(and pulling it off as well)
 
  • +1
Reactions: Orka
dawooddX said:
yes! i worded it a bit off. im fully aware. thats why im gonna practice a fuckton before thinking abt finally attempting it.

the midface area is actually insanely risky. i realize how bgm is genuienly insane in the head to think abt attempting it(and pulling it off as well)
Click to expand...
how are you planning on practicing? with filler and just dissolving?
 
  • +1
Reactions: dawooddX
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

mirin brah, didn't read everything because i'm in a rush right now but the results look great
 
  • +1
Reactions: Orka
Orka said:
how are you planning on practicing? with filler and just dissolving?
Click to expand...
yep basically try from giga small shit and step it from there

ill try wit a body part first
rewatch vids over and over again for specific technique and taking notes
practice alot of marking arnd my face to be very accurate
aspirating
then a super giga low dose to gauge technique

also of course making sure of other factors like practicing and getting used to my less dominant hand(as its giga over tier if u dont while u do gonions) etc
 
  • +1
Reactions: Orka
dawooddX said:
yep basically try from giga small shit and step it from there

ill try wit a body part first
rewatch vids over and over again for specific technique and taking notes
practice alot of marking arnd my face to be very accurate
aspirating
then a super giga low dose to gauge technique

also of course making sure of other factors like practicing and getting used to my less dominant hand(as its giga over tier if u dont while u do gonions) etc
Click to expand...
Sorry for not responding earlier, good luck!
 
  • +1
Reactions: dawooddX
Bumping this hq thread again
 
  • Love it
Reactions: Orka
:eek:
 
I'll soon be getting filler in my jaw and chin too, I'm just waiting for my cannula to arrive❤️
 
  • Love it
Reactions: Orka
weepmeep said:
I'll soon be getting filler in my jaw and chin too, I'm just waiting for my cannula to arrive❤️
Click to expand...
what made you opt for a cannula for your chin?
 
Grievous said:
Can we see a further out shot of ur side profile?
I wanna see how much it ascended u to see if I think its worth it or not
Click to expand...
Did u ever find those pics?
 
  • +1
Reactions: Orka
Grievous said:
Did u ever find those pics?
Click to expand...
no and now I'm in america :forcedsmile:

idk if I'll have time, but I'll try to keep looking

I dont usually take side pics cause my maxilla is raped
 
  • +1
Reactions: Grievous
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

holy shit mirin fucking hard
 
  • Love it
Reactions: Orka
Orka said:
what made you opt for a cannula for your chin?
Click to expand...
This is for the jaw, I'm going to release about 0.2 ml on each side along the jaw line.
In general, a cannula can be useful for those who have a naturally narrow chin and want to make it wider (to correct the front), it's called fan technique
 
  • +1
Reactions: Orka
weepmeep said:
This is for the jaw, I'm going to release about 0.2 ml on each side along the jaw line.
In general, a cannula can be useful for those who have a naturally narrow chin and want to make it wider (to correct the front), it's called fan technique
Click to expand...
ah alright, I assumed you wanted to use it for your chin.

Good luck!
 
  • +1
Reactions: weepmeep
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

Very good thread i read everything
 
  • Love it
Reactions: Orka
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

Hate r/diycosmeticprocedures bunch of age regressed Becky’s
 
  • +1
Reactions: Orka
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

mirin
 
  • +1
Reactions: Orka
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

Mirin
 
  • Love it
Reactions: Orka
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

could be in best of the best
 
  • Love it
  • +1
Reactions: Deleted member 301319 and Orka
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

BTW it is not uncommon for hialuronidase to cause very serious alergic reactions including the more rare anafilatic shock > death. So an alergy test for hialuronidase is essential for safety
 
  • +1
Reactions: Orka
elim.doc said:
BTW it is not uncommon for hialuronidase to cause very serious alergic reactions including the more rare anafilatic shock > death. So an alergy test for hialuronidase is essential for safety
Click to expand...
not as common as you're making it out to be

Not anywhere near death, and the reactions are often mild, but yes you can get an allergy test if you want. I just don't think it's necessary considering the rarity of it happening.
 
  • +1
Reactions: elim.doc
Imagine doing all this when you had tò Just bonesmash the chin lol at this low IQ vipcels
 
  • JFL
Reactions: Orka
Orka said:
not as common as you're making it out to be

Not anywhere near death, and the reactions are often mild, but yes you can get an allergy test if you want. I just don't think it's necessary considering the rarity of it happening.
Click to expand...
The risk is way way higher them with hialuronic acid itself and basically any other injectable tho.
Jus adding my 2 cents
 
Last edited:
  • +1
Reactions: Orka
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

I am mirin you more than god right you are goated i wish the whole forum only had users like you
 
  • JFL
Reactions: Orka
elim.doc said:
The risk is way way higher them with hialuronic acid itself and basically any other injectable tho.
Jus adding my 2 cents
Click to expand...
Do you do your fillers yourself?
 
  • +1
  • Hmm...
Reactions: elim.doc and Orka
  • +1
Reactions: red_harlow
elim.doc said:
Not yet
Click to expand...
most of the money cost is just the person doing the fillers
fillers itself are so fucking cheap
doctors dont even do it the fucking nurses or random liscensed niggas do
if you are genuine person with a good cognition ability(which i do believe you are)you can easily do
them at home

my sisters a doc and she dosent know shit about fillers she used to watch yt tutorials jfl :lul:
research about fillers and how to do them its the easiest shit ever like taking a blood sample
i genuinely believe if you research and practice fillers dedicated for 3 months(the 100% rate)
You can 100% do it if you cant ill chop my dick off with a used filler syringe
 
nurses dont know shit about fillers they are just a random with liscense to perform(they learned the same way you will)
if a 70 iq nurse can do it you can def do it this is my message to eveyone here
 
red_harlow said:
most of the money cost is just the person doing the fillers
fillers itself are so fucking cheap
doctors dont even do it the fucking nurses or random liscensed niggas do
if you are genuine person with a good cognition ability(which i do believe you are)you can easily do
them at home

my sisters a doc and she dosent know shit about fillers she used to watch yt tutorials jfl :lul:
research about fillers and how to do them its the easiest shit ever like taking a blood sample
i genuinely believe if you research and practice fillers dedicated for 3 months(the 100% rate)
You can 100% do it if you cant ill chop my dick off with a used filler syringe
Click to expand...
Yeah i can do them and im actually getting licensed in 2 years, i just dont because i made friends with a doc that does them for me for very cheap and hes like a celebrity type injector (famous where i live), so his experience been teaching me quite a lot.
I will start self injecting soon tho, to practice
 
red_harlow said:
nurses dont know shit about fillers they are just a random with liscense to perform(they learned the same way you will)
if a 70 iq nurse can do it you can def do it this is my message to eveyone here
Click to expand...
Here were i live nurses are not allowed to do them haha. I dont agree with that cause although the risk is very low, if any complications arise when self injecting ur legit fucked up. Its not that simple, depth, speed of injection, technique, layer, all matter a lot when doing it. You can cause some nasty vascular occlusions by not knowing exactly what ur doing.
Just my 2 cents
 
elim.doc said:
Here were i live nurses are not allowed to do them haha. I dont agree with that cause although the risk is very low, if any complications arise when self injecting ur legit fucked up. Its not that simple, depth, speed of injection, technique, layer, all matter a lot when doing it. You can cause some nasty vascular occlusions by not knowing exactly what ur doing.
Just my 2 cents
Click to expand...
you will filter all of that out if you do it correctly but thats a very good arguement
my sisters gonna do it free for me jfl i got a the owner at my house
 
red_harlow said:
you will filter all of that out if you do it correctly but thats a very good arguement
my sisters gonna do it free for me jfl i got a the owner at my house
Click to expand...
elim.doc said:
Here were i live nurses are not allowed to do them haha. I dont agree with that cause although the risk is very low, if any complications arise when self injecting ur legit fucked up. Its not that simple, depth, speed of injection, technique, layer, all matter a lot when doing it. You can cause some nasty vascular occlusions by not knowing exactly what ur doing.
Just my 2 cents
Click to expand...
what is your logical argument towards migration i am interested in that man
 
you are a life saver thanks a lot
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...
 
  • +1
Reactions: Orka
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

Amazing Post first off
Im highly considering doing this for my zygos.
Do you know anyone who has done it or do you have the points to use for the injection and do you know how much volume would be needed there?
unfortunately all the youtube videos were on woman and they looked like aliens after
 
  • +1
Reactions: Orka
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...


Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

🤦🤦
 
lars6 said:
Amazing Post first off
Im highly considering doing this for my zygos.
Do you know anyone who has done it or do you have the points to use for the injection and do you know how much volume would be needed there?
unfortunately all the youtube videos were on woman and they looked like aliens after
Click to expand...
I'm doing my jaw early next year (few months) and with that, probably my zygos too. I'll make a guide with points for people who need it. But I'm not sure if I should release a similarly formatted guide to this one on each area
ccwb said:
🤦🤦
Click to expand...
what?
 
  • +1
Reactions: lars6 and 2414763h
Orka said:
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine


Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results


1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.



4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:
looksmax.org

I just finished doing my own Chin Filler [ Video ]

1.1ml, not much, I'm somewhat happy with the results but I need to wait for the swelling to calm down first. Heavily considering a second session, but no pain so far so im pretty happy Video is a timelapse for now, the original footage is 30 minutes and i cba to edit it all rn I'll release a...
looksmax.org looksmax.org

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]
Click to expand...

Amazing @Orka I should try this out
 
  • +1
Reactions: Orka
You must log in or register to reply here.

Similar threads

teddy101
FRAUDMAXXING: The Best Fraud Maxxing Guide [MEGA THREAD]
2 3 4
Replies
165
Views
13K
JporkFoid
JporkFoid
SlayerJonas
Looksmaxxing Roidmaxxing 101™ - How to get a physique halo
2 3 4 5
Replies
217
Views
14K
coldsigma
coldsigma
Asoka
  • Article
Looksmaxxing Makeup for Males - Easy, cheap but an effective way to mog (Makeupmaxxing)
2 3 4 5
Replies
208
Views
24K
Sba_123
Sba_123
Org3cel
Looksmaxxing Sclera-Maxxing: The Complete Evidence-Based Guide to Whitening and Brightening the Whites of Your Eyes
2
Replies
52
Views
9K
looksiseverything
looksiseverything
emeraldglass
How Social Interaction Actually Works
2 3 4 5
Replies
225
Views
16K
TrueCurryCel13
TrueCurryCel13

Users who are viewing this thread

  • zapdos
Total: 10 (Looksmaxers: 1, Bluepillers: 9)
Back
Top