INSTANTLY fix Chin Recession | A Guide to DIY Chin Filler + **INJECTION VIDEOS**

  • +1
Reactions: Sayori, 7evenvox22, Insomnia and 1 other person
I'm not into fillers but this is such a good thread :Comfy:
 
  • Love it
  • +1
Reactions: Orka and LTNUser
It's hyaluronic acid, so 12-18 months by default.

But to avoid any migration (since I don't entirely trust my injection skills considering this was my first time) I'll be dissolving myself within the next year or so.
How many filler threads have you made in total ?
 
  • +1
Reactions: Orka
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4


This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine



Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results




1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.




4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.




5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]

Me: O-ORKA!! NO MORE FILLER! I RESISSTT~~ *Grips sheets*
Orka: Oh yeah?~ is that so?
*SMACK*
Me: Eekkkk!~ N-no more.. *pants*
Orka: its ok kitten.. I like a little. resistance.
Me: O-orka let me go! *wiggles around chained up* no more filler…
 
  • +1
Reactions: Tigermoggerlol
Me: O-ORKA!! NO MORE FILLER! I RESISSTT~~ *Grips sheets*
Orka: Oh yeah?~ is that so?
*SMACK*
Me: Eekkkk!~ N-no more.. *pants*
Orka: its ok kitten.. I like a little. resistance.
Me: O-orka let me go! *wiggles around chained up* no more filler…
Man
 
  • JFL
  • +1
Reactions: 7evenvox22 and rotation
How many filler threads have you made in total ?
2

A guide, and a report saying I was done injecting myself

nvm 3 actually
 
  • +1
Reactions: 7evenvox22
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4


This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine



Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results




1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.




4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.




5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]

mirin so hard
 
  • Love it
Reactions: Orka
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4


This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine



Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results




1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.




4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.




5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]

great post.

would add to the list of products. Are desinfection products, and gloves. That is most impotant to prevent infections. Need to aim for a hospital level of de-germing your hands, work place, and also your skin.
 
  • +1
Reactions: Orka
great post.

would add to the list of products. Are desinfection products, and gloves. That is most impotant to prevent infections. Need to aim for a hospital level of de-germing your hands, work place, and also your skin.
I clarified that I had gloves but didn't include them in the photo, but I didn't mention disinfectant. Good point!

And thanks!
 
  • +1
Reactions: 7evenvox22 and eduardkoopman
Is it any harder to do on the gonions? I mean risk-wise and like getting the shape and shit right
 
  • +1
Reactions: 7evenvox22 and Orka
Is it any harder to do on the gonions? I mean risk-wise and like getting the shape and shit right
I'd say that technique is a bigger concern than the safety of the injection.

Your jaw isn't extremely vascular, so risk wise you're still fine, but if you don't get the technique right then you'll kinda botch yourself.

TLDR:
Not dangerous, but easy to botch since you're dealing with a large area and lots of potential asymmetry
 
  • +1
Reactions: Micrognathic, 7evenvox22, yussimania and 1 other person
I clarified that I had gloves but didn't include them in the photo, but I didn't mention disinfectant. Good point!

And thanks!
i remember in the old days, had some guy (kinda dirty Indian vibes) injecting here on org. Saw the pics, of his dirty shit stained kitchen work place, no gloves, dirty stinky hands. Dude got an infection "obviously" and it was bad. Stupid dirty retards. Gotta make a really clean, desinfectant maxxed workspot, no dirty hands should ever come near the spot of injection, face need desinfectant as well. That stuff can actually be bought, like 98% alcohol or something stuff, burns bactaria to death
 
  • JFL
Reactions: Orka and AryanSchizo
I'd say that technique is a bigger concern than the safety of the injection.

Your jaw isn't extremely vascular, so risk wise you're still fine, but if you don't get the technique right then you'll kinda botch yourself.

TLDR:
Not dangerous, but easy to botch since you're dealing with a large area and lots of potential asymmetry
as far as vains in face goes. good to study them. And see, where they are on your face. And REALY avoid the main artiry that goes to the eye, as there is blindness risk in rare cases when you inject stuff into that vain accidentally. The other places, risk is probably manageable if you hit a vain and inject that stuff into there
 
  • +1
Reactions: Orka and Zagro
Me: O-ORKA!! NO MORE FILLER! I RESISSTT~~ *Grips sheets*
Orka: Oh yeah?~ is that so?
*SMACK*
Me: Eekkkk!~ N-no more.. *pants*
Orka: its ok kitten.. I like a little. resistance.
Me: O-orka let me go! *wiggles around chained up* no more filler…
Someone fapped to tis
 
  • +1
  • Hmm...
Reactions: 7evenvox22, Orka and ybuyhgui
i remember in the old days, had some guy (kinda dirty Indian vibes) injecting here on org. Saw the pics, of his dirty shit stained kitchen work place, no gloves, dirty stinky hands. Dude got an infection "obviously" and it was bad. Stupid dirty retards. Gotta make a really clean, desinfectant maxxed workspot, no dirty hands should ever come near the spot of injection, face need desinfectant as well. That stuff can actually be bought, like 98% alcohol or something stuff, burns bactaria to death
Spread mud on your face right after injecting for the most natural look

Hollywood women look unnatural because they're not mudding
 
  • JFL
  • +1
Reactions: 7evenvox22 and eduardkoopman
I am jewish I only imply and consider, never do whats said. All whats said is law and all whats done is said
 
  • JFL
  • +1
Reactions: 7evenvox22 and Orka
I am jewish I only imply and consider, never do whats said. All whats said is law and all whats done is said
yea whatever that means man
 
  • JFL
  • +1
Reactions: 7evenvox22, Hide and Nexom
mirin wish i wasnt a pussy
 
  • +1
Reactions: Orka
generational post
 
  • Love it
Reactions: Orka
This ltn nigga daiwik doing everything except ascending :lul::lul:
read every molecule was waiting for this thread and will def do it when i have money for filler
 
  • +1
Reactions: Orka
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4


This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine



Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results




1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.




4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.




5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]

gonna be me soon:owo:
 
  • Love it
  • +1
Reactions: 7evenvox22 and Orka

Attachments

  • IMG_20251207_080229_952.jpg
    IMG_20251207_080229_952.jpg
    29.5 KB · Views: 0
  • +1
Reactions: Orka
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4


This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine



Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results




1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.




4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.




5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]

Good stuff per usual bhai.

Tbh tho I'm too retarded to do any of this jfl I just know I'd majorly fuck it up :feelscry:

Is it possible to do this exact type stuff at an actual clinic through an expert? Surely it'd cost more, but I don't mind
 
  • +1
Reactions: Insomnia, LTNUser and Orka
Good stuff per usual bhai.

Tbh tho I'm too retarded to do any of this jfl I just know I'd majorly fuck it up :feelscry:

Is it possible to do this exact type stuff at an actual clinic through an expert? Surely it'd cost more, but I don't mind
yes filler is done by professionals a lot, it's very common lol

they just charge more per ml
 
  • +1
Reactions: Insomnia, 7evenvox22 and Swarthy Knight
:eek:
 
  • +1
Reactions: Insomnia and 7evenvox22
o
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4


This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine



Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results




1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.




4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.




5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]

orka i love you

you and tigermogger have convinced me and i did further research and looked onto other ppls experience

i genuienly think i can pull this off

im excited
 
  • +1
Reactions: Insomnia, Tigermoggerlol and Orka
o

orka i love you

you and tigermogger have convinced me and i did further research and looked onto other ppls experience

i genuienly think i can pull this off

im excited
Good luck! :bigbrain:
 
  • +1
Reactions: Insomnia and 7evenvox22
WHY IS THIS NOT IN BOTB?
 
  • +1
  • JFL
Reactions: 7evenvox22 and Orka
Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4


This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


A Huge thanks to @Sick , an amazing person who is experienced in this and helped through it.

Note: I'm not going to dive into the specifics of types, uses, etc. for filler, this thread is only about DIY Filler in the chin for men.
You can read more about fillers in general in guides by others, or in mine



Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results




1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)
View attachment 4374630
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:


View attachment 4374248

I ended up sourcing topical lidocaine myself at a pharmacy, but they only allowed me to get 1% (you should try getting 5%, but even at 1% I didn’t feel pain from the injection).
1% Worked fine, I'm pretty sure I could've done it without lidocaine tbh, I would still recommend 5% for proper numbness,

Note: I told them I needed it to wax my dad's chest hair, she started talking about some bullshit post-waxing treatment instead of giving me my fucking lidocaine, stupid bitch.

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was just enough for me, but for people with more sensitive skin I'd recommend 5%

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 4371889

If blood does go into the needle, it's because of the higher blood pressure found in arteries, meaning I’d change injection sites and aspirate again.
(once you change injection spots you can still use the needle, it doesn't contaminate it)

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting an artery on accident. My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate the arteries in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.


I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.


This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.



This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.


3. Injection Site
View attachment 4374549
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


Here’s a quick image that I kept in mind before injecting:
View attachment 4373902
But, of course, I ended up drawing my own lines since I'm a man, not a woman, which looked like this:

View attachment 4382352
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
a few mm off of the center of my chin, I used the red lines to visualize where the center was, then drew red lines to the left and right of the center, this is usually where the arteries are, so I just avoided them.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 4371931
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick. I also didn't draw the circles, but I would recommend you do it.




4. Injection Process



By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol






Bonus vid in this thread:

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)
View attachment 4376712
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.




5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters from 2.0ML of HA Filler:

View attachment 4382373View attachment 4382370
[ I injected too superficially as this was my first time injecting, if you could feel my chin you could actually feel a rod-like shape in the center of it lol ]
My mom started questioning why my chin was "swolen", I just dodged the questions and she didn't seem to care.
I'm sure you can come up with an excuse if you're hiding this from your parents too

View attachment 4374650
Before actually doing the filler I was just practicing reaching my bone with an empty needle without lidocaine, to test my pain tolerance (this step isnt needed), and not pushing anything inside. I thought I had hit an artery and wrote sick about it lmfao
This is not what happens when you hit an artery, this was just hitting a vein, an artery will have blood flowing out more aggressively

Wish me luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.



Credits:
Videos used in this thread were recorded by @Bryce on a discord call in a groupchat.
@Sick helped me throughout this process & addressed anything I was skeptical about, also reminded me to aspirate on call since I was quite nervous.

Additional Tags:
@BigBallsLarry @Insomnia @Bryce [BWCF]

Nice
 
  • +1
Reactions: Orka
So wat?
 
  • +1
Reactions: Orka
Keeping spamming it bozo idc
 
  • +1
Reactions: Orka
  • +1
Reactions: LTNUser and Orka
When will you drop your next filler thread ?
 
  • +1
Reactions: Orka
How is this not btob yet
 
  • +1
Reactions: 7evenvox22 and Orka
Why not botb yet
 
  • +1
Reactions: Orka
Why not botb yet
pretty sure @Clavicular is responsible for adding stuff to the botb subforum

and that guy is getting high, drunk, and fucking htbs while we rot here :feelskek:
 
  • +1
Reactions: 7evenvox22 and tomahawk
pretty sure @Clavicular is responsible for adding stuff to the botb subforum

and that guy is getting high, drunk, and fucking htbs while we rot here :feelskek:
LMFAO why not Master isnt he co-founder
 
  • +1
Reactions: Orka

Users who are viewing this thread

  • 1ncelbruh0218
Back
Top