Mouth widening appliance

D

Deleted member 7076

Fuchsia
Joined
May 18, 2020
Posts
10,668
Reputation
15,622
anyone have any good sources? 6.5cm mouth or rope for me tbh
 
lyteCache.php
 
  • Ugh..
  • Woah
  • JFL
Reactions: BradAniston, WTFCGod, Deleted member 5875 and 1 other person
looksmax.org

Mouth Widening Appliances

Mouth Widening Appliance 3d models for 3d printing Now before someone asks How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all Here are the different sizes: 7cm: https://www.tinkercad.com/things/2ZfCaY9upiy...
looksmax.org looksmax.org
damn i should get paid with how many times i've hooked users with your thread nigga @RecessedPrettyboy
 
  • +1
  • JFL
Reactions: animo123, oatmeal, 5'8manlet and 1 other person
Warlow said:
looksmax.org

Mouth Widening Appliances

Mouth Widening Appliance 3d models for 3d printing Now before someone asks How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all Here are the different sizes: 7cm: https://www.tinkercad.com/things/2ZfCaY9upiy...
looksmax.org looksmax.org
damn i should get paid with how many times i've hooked users with your thread nigga @RecessedPrettyboy
Click to expand...
he's updating the design and I am a impatientcel
 
Does that appliance work and are the results permanent?
 
16tyo said:
he's updating the design and I am a impatientcel
Click to expand...
what? you can just go to a 3d printing place and get one printed or order an appliance online. Although the latter is more expensive
 
16tyo said:
he's updating the design and I am a impatientcel
Click to expand...
I have the 9cm new design ready but i havent printed it myself. if you want i can make it available now.
 
  • Love it
  • +1
Reactions: oatmeal, Deleted member 7076 and Deleted member 6423
RecessedPrettyboy said:
I have the 9cm new design ready but i havent printed it myself. if you want i can make it available now.
Click to expand...
wait so how do you use it exactly? while u sleep? also how many cm is your mouth and the cm of the appliance you use, so i have an idea which size to get.
 
  • +1
Reactions: Good_Little_Goy, animo123 and SexyMofo
16tyo said:
wait so how do you use it exactly? while u sleep? also how many cm is your mouth and the cm of the appliance you use, so i have an idea which size to get.
Click to expand...
use it whenever you can. you can get a smaller one later on to sleep with if you find it too uncomfortable with a large one.
Rn you can only get the 9cm bc its only one that I have thats ready.
whats your mouth width?
 
  • +1
Reactions: Deleted member 7076
RecessedPrettyboy said:
use it whenever you can. you can get a smaller one later on to sleep with if you find it too uncomfortable with a large one.
Rn you can only get the 9cm bc its only one that I have thats ready.
whats your mouth width?
Click to expand...
how does the 3d printing process work? i have no clue ngl
 
RecessedPrettyboy said:
it just prints whatever you want in 3d
Click to expand...
ik that. I mean you just download the file then what? Do you need to transfer it to an SD card and plug it into the machine? ion know
 
Warlow said:
ik that. I mean you just download the file then what? Do you need to transfer it to an SD card and plug it into the machine? ion know
Click to expand...
you just send the file to a 3d printing service. if you had a 3 printer you would just print it from the computer i think
 
RecessedPrettyboy said:
you just send the file to a 3d printing service. if you had a 3 printer you would just print it from the computer i think
Click to expand...
oh so they print it, you pick it up and then pay right then and there?
 
RecessedPrettyboy said:
use it whenever you can. you can get a smaller one later on to sleep with if you find it too uncomfortable with a large one.
Rn you can only get the 9cm bc its only one that I have thats ready.
whats your mouth width?
Click to expand...
5.5cm currently. i think thats big but it doesn't appear wide due to my nose so i need to reach 6.4cm in order to have ideal ratios
how many cm can i expect realistically? 0.9cm increase is pretty significant tbh
 
16tyo said:
5.5cm currently. i think thats big but it doesn't appear wide due to my nose so i need to reach 6.4cm in order to have ideal ratios
how many cm can i expect realistically? 0.9cm increase is pretty significant tbh
Click to expand...
@RecessedPrettyboy bump
 
RecessedPrettyboy said:
made both ends that sit on the lips curved so it doesnt hurt the lips as much and is more comfortable
Click to expand...
how do you actually print out tho
Never done something like this before?
 
facialflex.com

Facial-Flex | No. 1 Facial Exercise Device

TRIM. TONE. TIGHTEN. 8 Weeks. 4 Minutes a Day. 100% Satisfaction Guaranteed. Reveal the younger you in just 8 weeks. In an 8 week study using Facial–Flex® just 4 minutes a day, RESULTS in both cosmetic and therapeutic arenas have been PROVEN. Face, Chin and Neck Muscles
facialflex.com facialflex.com
This one is legit and very durable unlike any other mouth widening device
 
Daw said:
facialflex.com

Facial-Flex | No. 1 Facial Exercise Device

TRIM. TONE. TIGHTEN. 8 Weeks. 4 Minutes a Day. 100% Satisfaction Guaranteed. Reveal the younger you in just 8 weeks. In an 8 week study using Facial–Flex® just 4 minutes a day, RESULTS in both cosmetic and therapeutic arenas have been PROVEN. Face, Chin and Neck Muscles
facialflex.com facialflex.com
This one is legit and very durable unlike any other mouth widening device
Click to expand...
expensive
 
  • Hmm...
Reactions: Deleted member 6695
16tyo said:
expensive
Click to expand...
Its worth the money
All the other ones are fragile as fuck. Would cost more buying new cheap ones over and over.
The company has worked on it for over 25 years improving it unlike any other brand
 
Daw said:
Its worth the money
All the other ones are fragile as fuck. Would cost more buying new cheap ones over and over.
The company has worked on it for over 25 years improving it unlike any other brand
Click to expand...
it doesn't take much iq to do it yourself ngl
 
  • +1
Reactions: Deleted member 6695
Would it be possible to custom print silicone or rubber for the ends? I think it would help a lot with lip cracks & tears when sleeping with it.

Also just to let you know one of the files was glitched, I printed 3 and the printing place told me one of the files was messed and one of the ends was disconnected from the rest and so it printed in 2 separate pieces.
 
You must log in or register to reply here.

Similar threads

infraorbidal
  • Question
Does the mouth widening appliance in both work?
Replies
14
Views
224
Ldar09867
Ldar09867
potatomasher
Discussion Peptide sources UK
Replies
12
Views
183
huhuhuh
huhuhuh
1ncelbruh0218
Serious Peptide source (WWB)
Replies
13
Views
455
stufftodo
stufftodo
negativ_canthalshit
Skincare help, color and smile lines
Replies
2
Views
160
johnbarnesballs
johnbarnesballs
C
Serious Alternative sourcing for kits4less
Replies
0
Views
145
Cope Maxxing
C

Users who are viewing this thread

Total: 2 (Looksmaxers: 0, Bluepillers: 2)
Back
Top