Mouth Widening Appliances

[Deleted member 66828]

it does work

why not just do lateral commisuroplasty diy, get a friend to do it for you

u only need local anesthezia and ur good to go

 

[Professor Grey]

why not just do lateral commisuroplasty diy, get a friend to do it for you

u only need local anesthezia and ur good to go

why do that, when you can just get this and stretch your mouth youd get the same amount of results in a few months without anesthesia. use your fingers even

 

[Deleted member 66828]

why do that, when you can just get this and stretch your mouth youd get the same amount of results in a few months without anesthesia. use your fingers even

surgery is more effective, lasts longer and works 100%

also a lot less time consuming

 

[Professor Grey]

why not just do lateral commisuroplasty diy, get a friend to do it for you

u only need local anesthezia and ur good to go

diy? so basically cut my skin there and it grows as lip ?

 

[Tachyon]

Cope

 

[Org3cel]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

@darktriadprince there you go man

 

[tit]

just post a picture of someone with a mouth thats more narrow than their nose theory
i guarantee you noone in this forum has a mouth that narrow, and if they do then it means they have a very very very bad icw (intercanine width) aka they would need to see a dentist asap

I have that mouth. It looks allot different because of shape, fullness etc so it’s less noticeable, but if this works I will look significantly better.

 

[tit]

The guy in quora thread achieved a 2.5cm wider mouth
Theoretically it makes complete sense too

Does he measure right after taking the device off, or at the end of the day?

 

[vlot47]

Let me know if it works.

r u kurd

 

[avenox]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

Will this make the top lips thinner too thonner since it’s stretching it?

 

[muragoat]

Will this make the top lips thinner too thonner since it’s stretching it?

no, but could give nasolabial folds

 

[brainmaxxed]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

micorplasticmaxxing i see

 

[softmaxxed LTN]

Lip expanders are generally cope and are proven to not work. Only possible effect of them is you may loosen the skin around your lips.

 

[absolutechad]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streeg[/B]
[QUOTE="RecessedPrettyboy, post: 2270002, member: 3539"]
[B][COLOR=rgb(184, 49, 47)][SIZE=22px]Mouth Widening Appliance 3d models for 3d printing[/SIZE][/COLOR][/B]

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

[B][U]Here are the different sizes:[/U][/B]

7cm: [URL]https://www.tinkercad.com/things/2ZfCaY9upiy[/URL]
7.5cm: [URL]https://www.tinkercad.com/things/bIiUsvUUbm9[/URL]

[URL='https://www.tinkercad.com/things/a9Rkjfqc8Qf'][B]8cm[/B][/URL]

[URL='https://www.tinkercad.com/things/cZFMtt2Ry7G'][B]8.5cm[/B][/URL]

9cm: [URL]https://www.tinkercad.com/things/eTx7tz1DL5E[/URL]

9.5cm: [URL]https://www.tinkercad.com/things/abZzaifuWgO[/URL]

10cm: [URL]https://www.tinkercad.com/things/lAZuXrnm0fN[/URL]

11cm: [URL]https://www.tinkercad.com/things/crHqEkeqpL5[/URL]

[B]12cm: [URL]https://www.tinkercad.com/things/894F9bpN4TV[/URL][/B]

Youll need to create an account in TinkerCad then just export the file as .stl format


[ATTACH type="full" alt="fsasfa.PNG"]379776[/ATTACH]
[B][USER=5187]@Notuglyjustpoor
@streege

Huge fucking cope delete this retarded shit
[/QUOTE]

 

[Phillybeard1996]

Huge fucking cope delete this retarded shit

[/QUOTE]
Worked for me

 

[absolutechad]

Worked for me
[/QUOTE]
Just your genetics locking in

 

[onlywigga]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

how long to do this before i would actually see a difference?

 

[Soychadcell]

mouth width is cope, its probably your shape
also this is just cope, mse is the only thing that will permanently widen your lips and even that only by a few mms at most

lateral comissuro plasty or a lip lift of the lips edges can also make your mouth, or atleast lips wider. But they are rare and scaring can be intense atleast for the lateral com.

 

[sebchi]

By obtaining a wider mouth, how you will ascend? What will you gain from it, this isn’t shade its genuine curiosity.

 

[Trensticles]

Thread is 5 years old, any updates OP?

 

[Professor Grey]

Thread is 5 years old, any updates OP?

I did this for 2 years. my mouth to nose ratio went from 1.3 to 1.5 and its kinda permanent

 

[Ræta]

How to get nasolabial folds:

 

[jeoyw9192]

I did this for 2 years. my mouth to nose ratio went from 1.3 to 1.5 and its kinda permanent

Which appliance did you use and where did you get it from?

 

[future_]

I did this for 2 years. my mouth to nose ratio went from 1.3 to 1.5 and its kinda permanent

i bet u got shitty nasolabial folds from it lmao

 

[Professor Grey]

i bet u got shitty nasolabial folds from it lmao

legit concern although i developed pretty smart and easy fix to that. I tape my naso folds and under eye folds with a simple tape while using the device. after 2+ years of use i have no naso folds

 

[Professor Grey]

Which appliance did you use and where did you get it from?

Read the post nigga

 

[Azie555]

legit concern although i developed pretty smart and easy fix to that. I tape my naso folds and under eye folds with a simple tape while using the device. after 2+ years of use i have no naso folds

do you have before/after pics?

 

[fromsomewhere]

legit concern although i developed pretty smart and easy fix to that. I tape my naso folds and under eye folds with a simple tape while using the device. after 2+ years of use i have no naso folds

How do you tape, like the way it stretcher skin outwards or what

 

[Professor Grey]

do you have before/after pics?

sorry lost all my before pics and also was very insecure at that age(didnt take lot of pics). You just have to take my word for it, im afraid

How do you tape, like the way it stretcher skin outwards or what

just tape on it bruh stretching the skin for long time is usually not ideal

 

[Azie555]

sorry lost all my before pics and also was very insecure at that age(didnt take lot of pics). You just have to take my word for it, im afraid

just tape on it bruh stretching the skin for long time is usually not ideal

like not even 1 pic of ur before exist?

 

[Plushie]

sorry lost all my before pics and also was very insecure at that age(didnt take lot of pics). You just have to take my word for it, im afraid

just tape on it bruh stretching the skin for long time is usually not ideal

wdym tape it? like tape the folds back so they aren't showing?

 

[jeoyw9192]

Read the post nigga

lol was just wondering the exact size im sure that would vary per person but did u keep the same size appliance throughout going from 1.3 to 1.5 mouth to nose ratio?

 

[jester]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

did anyone from this thread 3d print an extra one? i’ll buy it
or can op just 3d print one for me and i’ll buy it?

 

[Professor Grey]

did anyone from this thread 3d print an extra one? i’ll buy it
or can op just 3d print one for me and i’ll buy it?

I'm down but how do i send u it?

 

[jester]

I'm down but how do i send u it?

i found a diy way to do it all good brother

 

[rossthesub5incel]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

This is so not gonna work

 

[el shiquetito]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

It's all about the palate width

 

[oliver.is.sigma]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

how do u use it

 

[follicel]

just start thumbpulling lil ninja

 

[Gymcell&Mtn]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

How do it know if i need this, can somebody help me figure out my nose to lip ratio.

 

[imjustcookedfr]

if you get wrinkles or sagginess from this procedure, you cannot get it reverse.
however strecthing and making your mouth can be reverseble if you stop using this tools.
so, it's not worth it.

Ahoj, jsi furt aktivní na orgu?

 

[Kuros]

How do it know if i need this, can somebody help me figure out my nose to lip ratio.

take a front profile pick and find a transpartent ruler from google then over lay it and mesure the alar base and the mouth, and you need to have 1,618 x mouth to nose ratio

 

[Kuros]

i found a diy way to do it all good brother

yeah me too it's called bracesshop.com

 

[JOTAROSON]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

 

[JOTAROSON]

3D-модели расширителей рта для 3D-печати

Прежде чем кто-нибудь спросит
Как мне это распечатать, если у меня нет 3D-принтера? Просто сходите в магазин, предоставляющий услуги 3D-печати, и распечатайте. Это просто и совсем недорого.

Вот разные размеры:

7 см: https://www.tinkercad.com/things/2ZfCaY9upiy
7,5 см: https://www.tinkercad.com/things/bIiUsvUUbm9

8 см

8,5 см

9 см: https://www.tinkercad.com/things/eTx7tz1DL5E

9,5 см: https://www.tinkercad.com/things/abZzaifuWgO

10 см: https://www.tinkercad.com/things/lAZuXrnm0fN

11 см: https://www.tinkercad.com/things/crHqEkeqpL5

12 см: https://www.tinkercad.com/things/894F9bpN4TV

Вам потребуется создать учетную запись в TinkerCad, а затем просто экспортировать файл в формате .stl.


View attachment 379776
@Notuglyjustpoor
@streege

Из какого материала это сделано?What material should the parts be made of?

 

[runer]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

sizing guide?

 

[thenamespawn]

Worked for me
[/QUOTE]
Could you elaborate mate?

 

[nosecel (sec acc)]

i've go a lot of experience with it if any of you have questions just dm me

 

[nosecel (sec acc)]

i've go a lot of experience with it if any of you have questions just dm me

i got 3 mm gains but i'm not consistent lately and i stopped

 

[nightcore1]

i got 3 mm gains but i'm not consistent lately and i stopped

any issues with stuff like smile lines or fine lines worsening?