Mouth widening update - Mouth width permanently increased

[RecessedPrettyboy]

So as some of you know I got buccal fat removal a few days ago and I havent been able to use the mouth widener these last days (3 days)

Ive been keeping track of my mouth width and it seems like my mouth has finally permanently increased 4mm. Its 45-44mm no matter what now. (Before 41mm). This could mean you need to give the appliance a break after a while for a few days so new tissue can be permanently made?

Something else Ive noticed is that my mouth looks natural now. When using the appliance the corners of the mouth get stretched and the lips dont go all the way to where they are stretched. Now my lips have gone all the way where they used to be stretched as if they filled in during this break.

Just some lifefuel for people using mouth wideners here.

I will update this if any other changes happen or if it shrinks.


@SexyMofo @draco @matlockmatt @ineedhelo4844

 

[Deleted member 3020]

brb imagining ur uncanny lips

 

[joeveniro]

Mouth wideners = mse?
Como tu fez p pegar um mse também? Falei com ym dentista sobre expansor de mandibula( palato ) ao menos o design é bem similar, função pode ser diferente tho

 

[RecessedPrettyboy]

brb imagining ur uncanny lips

They look like opry lips. Just a bit smaller in width.

 

[RecessedPrettyboy]

Mouth wideners = mse?
Como tu fez p pegar um mse também? Falei com ym dentista sobre expansor de mandibula( palato ) ao menos o design é bem similar, função pode ser diferente tho

Mouth Widening Appliances

Mouth Widening Appliance 3d models for 3d printing Now before someone asks How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all Here are the different sizes: 7cm: https://www.tinkercad.com/things/2ZfCaY9upiy...

looksmax.org

 

[Swolepenisman]

Did you visit a dentist and ask for mse or order a palate expander off the internet?

 

[RecessedPrettyboy]

Did you visit a dentist and ask for mse or order a palate expander off the internet?

Im using this. Not mse

Mouth Widening Appliances

Mouth Widening Appliance 3d models for 3d printing Now before someone asks How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all Here are the different sizes: 7cm: https://www.tinkercad.com/things/2ZfCaY9upiy...

looksmax.org

 

[Deleted member 3020]

Mouth wideners = mse?
Como tu fez p pegar um mse também? Falei com ym dentista sobre expansor de mandibula( palato ) ao menos o design é bem similar, função pode ser diferente tho

Esse cara é um retardado total, ele tirou a gordura bucal quando poderia ter perdido peso jfl. desperdício total de dinheiro

 

[Deleted member 3020]

They look like opry lips. Just a bit smaller in width.

He has narrow lips... send pics

Mouth wideners = mse?
Como tu fez p pegar um mse também? Falei com ym dentista sobre expansor de mandibula( palato ) ao menos o design é bem similar, função pode ser diferente tho

Esse cara é um retardado total, ele tirou a gordura bucal quando poderia ter perdido peso jfl. desperdício total de dinheiro

 

[joeveniro]

Mouth Widening Appliances

Mouth Widening Appliance 3d models for 3d printing Now before someone asks How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all Here are the different sizes: 7cm: https://www.tinkercad.com/things/2ZfCaY9upiy...

looksmax.org

Ohh, quando eu li eu jurei q era pra aumentar o tamanho dos lábios
No caso n precisa de dentista nem nada ne? So imprimir
Usando português q de tanto usar ingles to com dor de cabeça3 pprt meu cérebro low iq n consegue

 

[RecessedPrettyboy]

Esse cara é um retardado total, ele tirou a gordura bucal quando poderia ter perdido peso jfl. desperdício total de dinheiro

Vc nao viu minha explicacao seu doente? Eu ja desci pra 12% e minha gordura bucal nao saiu. Eh um fato que a bolsa de bichat pode ser totalmente resistente a dieta em algumas pessoas. Pesquisa antes de falar merda e pagar de burro.

 

[RecessedPrettyboy]

Ohh, quando eu li eu jurei q era pra aumentar o tamanho dos lábios
No caso n precisa de dentista nem nada ne? So imprimir
Usando português q de tanto usar ingles to com dor de cabeça3 pprt meu cérebro low iq n consegue

Sim so imprimir.

 

[Deleted member 3020]

Vc nao viu minha explicacao seu doente? Eu ja desci pra 12% e minha gordura bucal nao saiu. Eh um fato que a bolsa de bichat pode ser totalmente resistente a dieta em algumas pessoas. Pesquisa antes de falar merda e pagar de burro.

então é por causa de seus ossos recuados subumanos de merda

 

[RecessedPrettyboy]

então é por causa de seus ossos recuados subumanos de merda

Cara vc tem QI negativo seu burro do krl? A quantidade de tecido q vc tem na bochecha nao tem nada a ver com os ossos filho da puta. Tem gente que geneticamente tem uma quantidade de gordura bucal maior que é completamente resistente a dieta e nao sai. Apenas com bichectomia. Eu mesmo tirei 8ml. Para de passar vergonha. Nao sabe nada lixo. Eu nao tenho ossos recuados meu perfil lateral é forward grown.

 

[Deleted member 3020]

Cara vc tem QI negativo seu burro do krl? A quantidade de tecido q vc tem na bochecha nao tem nada a ver com os ossos filho da puta. Tem gente que geneticamente tem uma quantidade de gordura bucal maior que é completamente resistente a dieta e nao sai. Apenas com bichectomia. Eu mesmo tirei 8ml. Para de passar vergonha. Nao sabe nada lixo. Eu nao tenho ossos recuados meu perfil lateral é forward grown.

I’m done talking to you spick. Also mirin how ur the only fag in here who says you have all these legendary things yet you have no pictures to cover what you’re saying. Mirin ur lack of self awareness

 

[delta7]

Cant it cause wrinkles?

 

[RecessedPrettyboy]

I’m done talking to you spick

You have no more arguments right you fucking low iq faggot. You cant argue agaisnt facts bitch.

 

[RecessedPrettyboy]

Cant it cause wrinkles?

No and I didnt get any wrinkles

 

[Deleted member 3020]

You have no more arguments right you fucking low iq faggot. You cant argue agaisnt facts bitch.

Read reply again. Facts require evidence, yet you deny to send them

 

[Deleted member 2788]

caralho mlk vc eh br ta de sacanagem UHAUHAUH, valeu mano qlqer dia desses imprimo na impressora 3d o modelo novo la do device, tmj

 

[RecessedPrettyboy]

Read reply again. Facts require evidence, yet you deny to send them

It takes 1 minute to search about the buccal fat pad and understand that it can be completely resistent to diet in some people. Im guessing ur too low IQ for that.

 

[Deleted member 2788]

Mouth wideners = mse?
Como tu fez p pegar um mse também? Falei com ym dentista sobre expansor de mandibula( palato ) ao menos o design é bem similar, função pode ser diferente tho

Nenhum dentista BR faz ideia do que é MSE, it’s over for narrowpalatecels, e expansor palatino apenas nao funciona depois dos 15 anos

 

[Deleted member 3020]

It takes 1 minute to search about the buccal fat pad and understand that it can be completely resistent to diet in some people. Im guessing ur too low IQ for that.

I am talking about your widening lips cope. Send me before or after. Or even your current photo... it takes 1 minute to take one

 

[malignant]

i couldnt find a 3d printing service store
i currently have 4 folded up pieces of paper in my mouth ngl

 

[Deleted member 8583]

So as some of you know I got buccal fat removal a few days ago and I havent been able to use the mouth widener these last days (3 days)

Ive been keeping track of my mouth width and it seems like my mouth has finally permanently increased 4mm. Its 45-44mm no matter what now. (Before 41mm). This could mean you need to give the appliance a break after a while for a few days so new tissue can be permanently made?

Something else Ive noticed is that my mouth looks natural now. When using the appliance the corners of the mouth get stretched and the lips dont go all the way to where they are stretched. Now my lips have gone all the way where they used to be stretched as if they filled in during this break.

Just some lifefuel for people using mouth wideners here.

I will update this if any other changes happen or if it shrinks.


@SexyMofo @draco @matlockmatt @ineedhelo4844

nice one bro im using it tomorrow, and GL with getting hollow cheeks now

 

[RecessedPrettyboy]

I am talking about your widening lips cope. Send me before or after. Or even your current photo... it takes 1 minute to take one

PMd

 

[malignant]

PMd

is the stretch on your mouth really extreme when using the device or no

 

[Deleted member 2788]

PMd

Cc tem antes e depois? Me manda tbm ai mano

 

[RecessedPrettyboy]

Cc tem antes e depois? Me manda tbm ai mano

So o depois. Quer?

 

[Deleted member 2788]

So o depois. Quer?

Yea

 

[RecessedPrettyboy]

is the stretch on your mouth really extreme when using the device or no

Hmm with the 8.5cm device for me no cuz im used to it. Depends on what u can handle

 

[Deleted member 6305]

Todo dia descubro um brasileiro novo aqui mds
also brb using imagination since no pics

 

[RecessedPrettyboy]

Todo dia descubro um brasileiro novo aqui mds
also brb using imagination since no pics

Eu tenho foto do depois so. Se quiser mando por PM

 

[Deleted member 6305]

Eu tenho foto do depois so. Se quiser mando por PM

manda son

 

[casadebanho]

Holy shit, that's absolute fucking lifefuel for me.
How long have u been using it for, how much time a day??

 

[casadebanho]

Não sabia que havia brasileiros aqui

 

[RecessedPrettyboy]

Holy shit, that's absolute fucking lifefuel for me.
How long have u been using it for, how much time a day??

1.5 months. I sleep with it so like 6-7hours

 

[Deleted member 5052]

Have a question OP. Can mouth widening cause buccinator hypertrophy giving chubby cheeks??

 

[RecessedPrettyboy]

Have a question OP. Can mouth widening cause buccinator hypertrophy giving chubby cheeks??

No and the buccinators even when hypertrophied dont cause chubby cheeks. That muscle is way too small.

 

[SexyMofo]

Yeah man I’ve started to notice the same thing. I was on vacation for like 4 days and couldn’t use it then and the width stayed the same or just very slightly decreased, also looked less uncanny like you said.

Congrats on buccal fat removal btw, could you pm some b&a’s after the swelling goes down? Probably gonna get it soon too. Good luck on the recovery bro!

 

[TITUS]

Show pics of before-after mouth widening and before-after fat removal, OR IT DIDN'T HAPPEN.

 

[Deleted member 7076]

So as some of you know I got buccal fat removal a few days ago and I havent been able to use the mouth widener these last days (3 days)

Ive been keeping track of my mouth width and it seems like my mouth has finally permanently increased 4mm. Its 45-44mm no matter what now. (Before 41mm). This could mean you need to give the appliance a break after a while for a few days so new tissue can be permanently made?

Something else Ive noticed is that my mouth looks natural now. When using the appliance the corners of the mouth get stretched and the lips dont go all the way to where they are stretched. Now my lips have gone all the way where they used to be stretched as if they filled in during this break.

Just some lifefuel for people using mouth wideners here.

I will update this if any other changes happen or if it shrinks.


@SexyMofo @draco @matlockmatt @ineedhelo4844

lips are soft tissue i don't see any reason they don't respond to mechanical stress like every other soft tissue in our body, mouth widening is legit
i will print your appliance soon tbh

 

[Deleted member 1140]

im currently streching with my fingers for a week

do you also get very good temporary gains just after streching is done? i get 5-10mm but it goes back to normal within minutes

 

[RecessedPrettyboy]

im currently streching with my fingers for a week

do you also get very good temporary gains just after streching is done? i get 5-10mm but it goes back to normal within minutes

yea with the appliance it goes to like 48mm right after I take it out and then stabilizes at 45mm, but it doesnt go to normal (41mm)

 

[Deleted member 1140]

yea with the appliance it goes to like 48mm right after I take it out and then stabilizes at 45mm, but it doesnt go to normal (41mm)

lifefuel thanks mate

i have no idea how it works with the 3d printing, do i just go to a 3d printer shop and ask them to print it for me? or can i even just order it online?

 

[RecessedPrettyboy]

lifefuel thanks mate

i have no idea how it works with the 3d printing, do i just go to a 3d printer shop and ask them to print it for me? or can i even just order it online?

yea just go to a store and ask them to print it. I think you can order online too depending on the store