Mouth Widening Appliances

[Deleted member 5187]

is it a narrow palate if it 43~44mm?

I'm not sure
I think its above average and would guess it's not narrow

 

[RecessedPrettyboy]

are you sure of it bro ? it will be so lifefuel for me... SO

The guy in quora thread achieved a 2.5cm wider mouth
Theoretically it makes complete sense too

 

[Deleted member 3043]

The guy in quora thread achieved a 2.5cm wider mouth
Theoretically it makes complete sense too

i asked him he never replied if it was permanent... if you have more infos please tell me

 

[randomvanish]

if you get wrinkles or sagginess from this procedure, you cannot get it reverse.
however strecthing and making your mouth can be reverseble if you stop using this tools.
so, it's not worth it.

 

[Deleted member 3043]

if you get wrinkles or sagginess from this procedure, you cannot get it reverse.

fillers

 

[Deleted member 4053]

appliances like these cause nasolabial folds, MSE is the best option for mouth widening

 

[Deleted member 6382]

appliances like these cause nasolabial folds, MSE is the best option for mouth widening

thank you for backing up your claim with multiple sources. Now im 100% sure ur not just some retard pulling claims out of his ass

 

[Deleted member 4053]

thank you for backing up your claim with multiple sources. Now im 100% sure ur not just some retard pulling claims out of his ass

I speak from experience faggot I used one for a month and started developing folds. Fuck you.

 

[RecessedPrettyboy]

fuck every 3d printing store is closed. will have to wait for coronavirus to end to start this shit

 

[Perfect Hairline]

I speak from experience faggot I used one for a month and started developing folds. Fuck you.

No pics no care.

 

[Deleted member 1632]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

8.5cm

9cm

10cm

11cm

Youll need to create an account in TinkerCad then just export the file as .stl format
Hopefully the files work and are printed properly by the printer. I havent printed it yet. Will be doing it this week hopefully
View attachment 379776
@Notuglyjustpoor
@streege

man i don't have program to open that,but how are the units ?
cm,mm,inches ?

 

[RecessedPrettyboy]

man i don't have program to open that,but how are the units ?
cm,mm,inches ?

Mm

 

[YoungRichNigga]

i have facialflex mouth widener, i stopped using that shit after i heard it can give u nasolabio folds but that shit is indeed legit.
Widen my mouth by 4mm after a week on max reissitance.

 

[dadfa]

Aren't mouth wideners just temporary gains?

 

[hairyballscel]

Aren't mouth wideners just temporary gains?

Yes, but they last a very long time, and it doesn't take much to maintain.

 

[randomvanish]

Aren't mouth wideners just temporary gains?

yes, plus it's giving you nice deep folds so it's not worth it at all.

 

[Alexanderr]

Why bother doing all of this when Tyrone can do it for you?

 

[SexyMofo]

Did you ever get them printed out? I’m probably gonna print the 10cm + 11cm. Facial flex measures out to roughly 8cm and has already made a pretty big difference. 11 cm will be insane but worth it.

 

[RecessedPrettyboy]

Did you ever get them printed out? I’m probably gonna print the 10cm + 11cm. Facial flex measures out to roughly 8cm and has already made a pretty big difference. 11 cm will be insane but worth it.

No because every single store in my country is still fucking closed cuz of lockdown
How long have you been using the facial flex and how are your results?

 

[SexyMofo]

No because every single store in my country is still fucking closed cuz of lockdown
How long have you been using the facial flex and how are your results?

Damn that sucks, i think there’s some where you can get it printed online then shipped so maybe look in to that. I used it like 3 months ago for a week and saw rlly good results but forgot about it and just like 4 days ago I started using it again and already seeing decent gains. I sleep with it on tho at night so it’s for a while, like 6-7 hrs / day.

 

[SexyMofo]

No because every single store in my country is still fucking closed cuz of lockdown
How long have you been using the facial flex and how are your results?

Also idk why everyone says you can get nasal folds lol. When you wear it, it doesn’t have any impact / intention on the fold area. I think it’s a meme cause the intended purpose of facial flex was to actually do some exercise with it and i think that causes folds.

 

[RecessedPrettyboy]

Damn that sucks, i think there’s some where you can get it printed online then shipped so maybe look in to that. I used it like 3 months ago for a week and saw rlly good results but forgot about it and just like 4 days ago I started using it again and already seeing decent gains. I sleep with it on tho at night so it’s for a while, like 6-7 hrs / day.

Im doing the same thing now with two ebay facial flex that I glued together. Sleeping with it at night too but I take it off in the middle of the night cause it still gets uncorfortable for me. Mine is 8.5cm wide. Been using it for a week now.

 

[Deleted member 7044]

mouth stretching is legit, i've been doing it without appliance and still gotten results, i need to get an appliance but facialflex is expensive af and not long enough

 

[RecessedPrettyboy]

mouth stretching is legit, i've been doing it without appliance and still gotten results, i need to get an appliance but facialflex is expensive af and not long enough

Just 3d print mine or get two plastic ebay facial flex and glue them togther

 

[Swolepenisman]

tbh
Chico, Pitt, DiCaprio, O'pry, Barrett
They all have small lips compared to rest of their face.

Pitt lips still seem stretched giving perfect shape since the skin on his face pulls them tight

 

[Yusu]

would I benefit from mouth widening?

sorry for the quality

 

[Mateusz74]

@sloopnoob

 

[RecessedPrettyboy]

would I benefit from mouth widening?

sorry for the quality

looks fine

 

[Deleted member 1140]

just ordered 9 9.5 and 10

anyone got good results?

 

[Boldandbeautiful]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

Does the file contain information for the size or do we have to tell the shop this is 9cm and this one is 10 etc?

 

[RecessedPrettyboy]

Does the file contain information for the size or do we have to tell the shop this is 9cm and this one is 10 etc?

each file has its own size

 

[Lux]

Good shit. Another bookmarked thread.

 

[Deleted member 1140]

@RecessedPrettyboy any more results?

 

[kej3094]

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege

I heard it increases lip size vertically, is this true? my lips are already big I need my mouth to be wider

 

[RecessedPrettyboy]

@RecessedPrettyboy any more results?

No i stopped using it due to my buccal fat removal

 

[RecessedPrettyboy]

I heard it increases lip size vertically, is this true? my lips are already big I need my mouth to be wider

Only if the appliance vertically expands the lips. The ones in this thread dont.

 

[kej3094]

Only if the appliance vertically expands the lips. The ones in this thread dont.

Ah maybe they meant it increased the mouth size vertically not the lips, I’m fine with small vertical expansion I just don’t want bigger lips

 

[RecessedPrettyboy]

Ah maybe they meant it increased the mouth size vertically not the lips, I’m fine with small vertical expansion I just don’t want bigger lips

This one doesnt even expand them slighly tbh I believe

 

[takura]

@RecessedPrettyboy


I've already done MSE but it didn't improve mouth width as much. Since facial flex is appearently just 8cm and it doesn't seem small on people from the videos, I am confused which sizes should I get to focus on mouth widening


3D printing is expensive here so I'm only gonna buy 2 sizes. Any suggestions on which ..

 

[takura]

Also what type of material is suitable for being used within the mouth


Metal? White plastic ?...

 

[brainded]

@RecessedPrettyboy


I've already done MSE but it didn't improve mouth width as much. Since facial flex is appearently just 8cm and it doesn't seem small on people from the videos, I am confused which sizes should I get to focus on mouth widening


3D printing is expensive here so I'm only gonna buy 2 sizes. Any suggestions on which ..

I am waiting on RecessedPrettyboy appliances to print right now. But I have a flex one that is 8 CM, which stretches my lips to about 7 CM. It was fine for the first week or so but I feel like its too small, so I would suggest anything above 9 CM I guess.

 

[takura]

I am waiting on RecessedPrettyboy appliances to print right now. But I have a flex one that is 8 CM, which stretches my lips to about 7 CM. It was fine for the first week or so but I feel like its too small, so I would suggest anything above 9 CM I guess.

Thnx

Will order up a 10 and a 12
Might just do 12 if the price for one is too high

 

[takura]

I am waiting on RecessedPrettyboy appliances to print right now. But I have a flex one that is 8 CM, which stretches my lips to about 7 CM. It was fine for the first week or so but I feel like its too small, so I would suggest anything above 9 CM I guess.

ALso what material are you going to be printing with?
White color appliance Im assumin?

 

[brainded]

ALso what material are you going to be printing with?
White color appliance Im assumin?

White plastic.
Same as the one I have right now, which is comfortable,

 

[RecessedPrettyboy]

Thnx

Will order up a 10 and a 12
Might just do 12 if the price for one is too high

Wait the 12 one isnt finshed yet lol
I didnt think anyone would use it so quick. Ill finish it soon

 

[RecessedPrettyboy]

ALso what material are you going to be printing with?
White color appliance Im assumin?

Use Abs to print

 

[takura]

Wait the 12 one isnt finshed yet lol
I didnt think anyone would use it so quick. Ill finish it soon

Looks similar to the 10cm one now . good job!

 

[Mouthbreath]

does mouth widening make sense if you have a narrow palate?

 

[Deleted member 1140]

i ordered 9 , 9.5 and 10 and non of them fit jfl

my 5cm mouth can’t handle thrm

 

[paranakee]

i ordered 9 , 9.5 and 10 and non of them fit jfl

my 5cm mouth can’t handle thrm

why didnt u start with 7.5