Ideal facial ratios and proportions

[tomi.er]

this is an updated version of my previous ideal facial ratios & proportions thread which can be found here

facial width to height ratio (FWHR): 1.8+
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the height of the middle part of the eyebrow to the upper lip.

Spoiler: measurement examples

View attachment 148798
View attachment 148799
View attachment 148805

lower/full face ratio: 0.62+
measured by dividing the height between the nasion to the bottom of the chin by the face height (distance from hairline to bottom of the chin)

Spoiler: measurement examples

View attachment 148808
View attachment 148812
View attachment 148813
View attachment 148814
View attachment 148815
View attachment 148816
View attachment 148817
View attachment 148818

midface ratio: 1.0-1.1
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the height of the nasion to the upper lip. the closer to 1:1 this is, the better.

Spoiler: measurement examples

View attachment 148822

mouth to nose ratio: 1.5-1.62
measured by dividing the width of the mouth by the width of the nose.

Spoiler: measurement examples

View attachment 148825

lower to upper lip ratio: 1.62
measured by dividing the height of the lower lip to the upper lip.

Spoiler: measurement examples

View attachment 148829

chin to philtrum ratio: 2.0-2.25
measured by dividing the height of the middle part of the lips to the bottom of the chin by the height of the bottom of the nose to the middle part of the lips.

Spoiler: measurement examples

View attachment 148849

bizygomatic to bigonial width: 1.35
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the bigonial width (distance from gonion to gonion).

Spoiler: measurement examples

View attachment 148904

ESR (eye separation ratio): 0.45-0.47
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the the bizygomatic width (distance from cheekbone to cheekbone). the "third eyeball method" - a theory in which the distance between your eyes should be another eye apart - is widely accepted in determining whether or not your eyes are an appropriate distance away from eachother, however this is flawed and incorrect. here is a thread explaining why, along with some more useful information about this measurement.

Spoiler: measurement examples

View attachment 148857

EME (eye mouth eye) angle: 47°-50°
measured by calculating the angle formed upon setting the vertex at the center of the lips with the arms crossing the eye pupils. the EME angle is a good indicator of masculinity and symmetry. here is a thread with more information about this measurement.

Spoiler: measurement examples

View attachment 148917

cervicomental angle: 105°-120°
measured by calculating the angle formed upon setting the vertex at the hyoid with the arms set along the bottom of the chin and the neck. anything above 120° is said to give the impression of a double chin.

Spoiler: measurement examples

View attachment 148876

gonial angle: 115°-130°
measured by calculating the angle formed upon setting the vertex at the gonion with the arms set along the mandible and the ramus.

Spoiler: measurement examples

View attachment 148878
View attachment 148880

canthal tilt: 4°-6°
measured by calculating the angle formed upon setting the vertex at the medial canthus with the arms set parallel to the floor and the lateral canthus.

Spoiler: measurement examples

View attachment 148907

palpebral fissure length to height ratio: 3.0-3.5
measured by dividing the palpebral fissure length (distance between the medial to the lateral canthus) by the height of the upper and lower eyelid.

forehead height: 3 fingers
measured by clenching your fingers together and seeing how many you can fit on your forehead horizontally before reaching your hairline.

facial thirds: 1/3 of face length
the upper third (height between the hairline to the middle part of the eyebrows), middle third (height between the middle part of the eyebrows to the bottom of the nose) and lower third (height between the bottom of the nose to bottom of the chin) of the face should be approximately 1/3rd of your entire face length (height between the hairline to bottom of the chin). these facial thirds should all be approximately equal to eachother and dividable smoothly into 3 parts as you transition down the face.

Spoiler: measurement examples

View attachment 148915
View attachment 148948

facial fifths: 1/5 of ear to ear width
the nose width, palpebral fissure length and length between the lateral canthus to the ear should be approximately 1/5th of the width between your ears. these facial fifths should all be approximately equal to eachother and dividable smoothly into 5 parts as you transition from left to right of the face.

Spoiler: measurement examples

View attachment 148947

thanks, but how do I measure the face in a photo?

 

[untiljapanese]

this is an updated version of my previous ideal facial ratios & proportions thread which can be found here

facial width to height ratio (FWHR): 1.8+
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the height of the middle part of the eyebrow to the upper lip.

Spoiler: measurement examples

View attachment 148798
View attachment 148799
View attachment 148805

lower/full face ratio: 0.62+
measured by dividing the height between the nasion to the bottom of the chin by the face height (distance from hairline to bottom of the chin)

Spoiler: measurement examples

View attachment 148808
View attachment 148812
View attachment 148813
View attachment 148814
View attachment 148815
View attachment 148816
View attachment 148817
View attachment 148818

midface ratio: 1.0-1.1
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the height of the nasion to the upper lip. the closer to 1:1 this is, the better.

Spoiler: measurement examples

View attachment 148822

mouth to nose ratio: 1.5-1.62
measured by dividing the width of the mouth by the width of the nose.

Spoiler: measurement examples

View attachment 148825

lower to upper lip ratio: 1.62
measured by dividing the height of the lower lip to the upper lip.

Spoiler: measurement examples

View attachment 148829

chin to philtrum ratio: 2.0-2.25
measured by dividing the height of the middle part of the lips to the bottom of the chin by the height of the bottom of the nose to the middle part of the lips.

Spoiler: measurement examples

View attachment 148849

bizygomatic to bigonial width: 1.35
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the bigonial width (distance from gonion to gonion).

Spoiler: measurement examples

View attachment 148904

ESR (eye separation ratio): 0.45-0.47
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the the bizygomatic width (distance from cheekbone to cheekbone). the "third eyeball method" - a theory in which the distance between your eyes should be another eye apart - is widely accepted in determining whether or not your eyes are an appropriate distance away from eachother, however this is flawed and incorrect. here is a thread explaining why, along with some more useful information about this measurement.

Spoiler: measurement examples

View attachment 148857

EME (eye mouth eye) angle: 47°-50°
measured by calculating the angle formed upon setting the vertex at the center of the lips with the arms crossing the eye pupils. the EME angle is a good indicator of masculinity and symmetry. here is a thread with more information about this measurement.

Spoiler: measurement examples

View attachment 148917

cervicomental angle: 105°-120°
measured by calculating the angle formed upon setting the vertex at the hyoid with the arms set along the bottom of the chin and the neck. anything above 120° is said to give the impression of a double chin.

Spoiler: measurement examples

View attachment 148876

gonial angle: 115°-130°
measured by calculating the angle formed upon setting the vertex at the gonion with the arms set along the mandible and the ramus.

Spoiler: measurement examples

View attachment 148878
View attachment 148880

canthal tilt: 4°-6°
measured by calculating the angle formed upon setting the vertex at the medial canthus with the arms set parallel to the floor and the lateral canthus.

Spoiler: measurement examples

View attachment 148907

palpebral fissure length to height ratio: 3.0-3.5
measured by dividing the palpebral fissure length (distance between the medial to the lateral canthus) by the height of the upper and lower eyelid.

forehead height: 3 fingers
measured by clenching your fingers together and seeing how many you can fit on your forehead horizontally before reaching your hairline.

facial thirds: 1/3 of face length
the upper third (height between the hairline to the middle part of the eyebrows), middle third (height between the middle part of the eyebrows to the bottom of the nose) and lower third (height between the bottom of the nose to bottom of the chin) of the face should be approximately 1/3rd of your entire face length (height between the hairline to bottom of the chin). these facial thirds should all be approximately equal to eachother and dividable smoothly into 3 parts as you transition down the face.

Spoiler: measurement examples

View attachment 148915
View attachment 148948

facial fifths: 1/5 of ear to ear width
the nose width, palpebral fissure length and length between the lateral canthus to the ear should be approximately 1/5th of the width between your ears. these facial fifths should all be approximately equal to eachother and dividable smoothly into 5 parts as you transition from left to right of the face.

Spoiler: measurement examples

View attachment 148947

suicide fuel

 

[UWILLNEVERKNOW8]

Measured it on my ID pic

FHWR: 1.77
Lower full face ratio: 0.63
Midface ratio: 0.98
Mouth to nose ratio: 1.52
Lower to upper lips ratio: 0.92 (lol)
Chin to philtrum ratio: 2.24
Bizygo to bigo: 1.12
ESR: 0.46
Palpebral fissure...: 3
Forehead: 4 fingers

post face

 

[killyourselfASAP]

hell no forehead just 3 fingers???

 

[matas2224]

who can measure my ratios

 

[pfl]

Outdated dogshit

 

[matas2224]

Outdated dogshit

no

 

[pfl]

no

Joined Feb 11, 2025
Last seen A moment ago · Viewing forum list
Posts307Reputation183

 

[matas2224]

Joined Feb 11, 2025
Last seen A moment ago · Viewing forum list
Posts307Reputation183

pfl

87% harmony
Joined Dec 17, 2023
Last seen A moment ago
Posts5,517Reputation8,528Points68Purchased upgrades1

 

[Tiger Exuberante]

Take a picture of your face with a smartphone camera? or with a special camera if I don't have one?

 

[Tiger Exuberante]

And how do you measure it anyway?

 

[AronnMtn]

i won't even measure my ratios, it would be pure suifuel

yea id measure my ratios then measure the rope

 

[noconfidence_guy]

Nice, is good to know that i am dephormed in all these things.

ur not alone on that

 

[CaptFin]

this is an updated version of my previous ideal facial ratios & proportions thread which can be found here

facial width to height ratio (FWHR): 1.8+
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the height of the middle part of the eyebrow to the upper lip.

Spoiler: measurement examples

View attachment 148798
View attachment 148799
View attachment 148805

lower/full face ratio: 0.62+
measured by dividing the height between the nasion to the bottom of the chin by the face height (distance from hairline to bottom of the chin)

Spoiler: measurement examples

View attachment 148808
View attachment 148812
View attachment 148813
View attachment 148814
View attachment 148815
View attachment 148816
View attachment 148817
View attachment 148818

midface ratio: 1.0-1.1
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the height of the nasion to the upper lip. the closer to 1:1 this is, the better.

Spoiler: measurement examples

View attachment 148822

mouth to nose ratio: 1.5-1.62
measured by dividing the width of the mouth by the width of the nose.

Spoiler: measurement examples

View attachment 148825

lower to upper lip ratio: 1.62
measured by dividing the height of the lower lip to the upper lip.

Spoiler: measurement examples

View attachment 148829

chin to philtrum ratio: 2.0-2.25
measured by dividing the height of the middle part of the lips to the bottom of the chin by the height of the bottom of the nose to the middle part of the lips.

Spoiler: measurement examples

View attachment 148849

bizygomatic to bigonial width: 1.35
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the bigonial width (distance from gonion to gonion).

Spoiler: measurement examples

View attachment 148904

ESR (eye separation ratio): 0.45-0.47
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the the bizygomatic width (distance from cheekbone to cheekbone). the "third eyeball method" - a theory in which the distance between your eyes should be another eye apart - is widely accepted in determining whether or not your eyes are an appropriate distance away from eachother, however this is flawed and incorrect. here is a thread explaining why, along with some more useful information about this measurement.

Spoiler: measurement examples

View attachment 148857

EME (eye mouth eye) angle: 47°-50°
measured by calculating the angle formed upon setting the vertex at the center of the lips with the arms crossing the eye pupils. the EME angle is a good indicator of masculinity and symmetry. here is a thread with more information about this measurement.

Spoiler: measurement examples

View attachment 148917

cervicomental angle: 105°-120°
measured by calculating the angle formed upon setting the vertex at the hyoid with the arms set along the bottom of the chin and the neck. anything above 120° is said to give the impression of a double chin.

Spoiler: measurement examples

View attachment 148876

gonial angle: 115°-130°
measured by calculating the angle formed upon setting the vertex at the gonion with the arms set along the mandible and the ramus.

Spoiler: measurement examples

View attachment 148878
View attachment 148880

canthal tilt: 4°-6°
measured by calculating the angle formed upon setting the vertex at the medial canthus with the arms set parallel to the floor and the lateral canthus.

Spoiler: measurement examples

View attachment 148907

palpebral fissure length to height ratio: 3.0-3.5
measured by dividing the palpebral fissure length (distance between the medial to the lateral canthus) by the height of the upper and lower eyelid.

forehead height: 3 fingers
measured by clenching your fingers together and seeing how many you can fit on your forehead horizontally before reaching your hairline.

facial thirds: 1/3 of face length
the upper third (height between the hairline to the middle part of the eyebrows), middle third (height between the middle part of the eyebrows to the bottom of the nose) and lower third (height between the bottom of the nose to bottom of the chin) of the face should be approximately 1/3rd of your entire face length (height between the hairline to bottom of the chin). these facial thirds should all be approximately equal to eachother and dividable smoothly into 3 parts as you transition down the face.

Spoiler: measurement examples

View attachment 148915
View attachment 148948

facial fifths: 1/5 of ear to ear width
the nose width, palpebral fissure length and length between the lateral canthus to the ear should be approximately 1/5th of the width between your ears. these facial fifths should all be approximately equal to eachother and dividable smoothly into 5 parts as you transition from left to right of the face.

Spoiler: measurement examples

View attachment 148947

I supposedly have good ratios, so why do I look so mid?