Ideal facial ratios and proportions

SexuallyAbusive

SexuallyAbusive

$$$ HGH ABU$ER $$$
Joined
Jun 21, 2019
Posts
1,578
Reputation
4,162
Time online
35d 7h 30m
this is an updated version of my previous ideal facial ratios & proportions thread which can be found here

facial width to height ratio (FWHR): 1.8+
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the height of the middle part of the eyebrow to the upper lip.



lower/full face ratio: 0.62+
measured by dividing the height between the nasion to the bottom of the chin by the face height (distance from hairline to bottom of the chin)








midface ratio: 1.0-1.1
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the height of the nasion to the upper lip. the closer to 1:1 this is, the better.

mouth to nose ratio: 1.5-1.62
measured by dividing the width of the mouth by the width of the nose.

lower to upper lip ratio: 1.62
measured by dividing the height of the lower lip to the upper lip.

chin to philtrum ratio: 2.0-2.25
measured by dividing the height of the middle part of the lips to the bottom of the chin by the height of the bottom of the nose to the middle part of the lips.

bizygomatic to bigonial width: 1.35
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the bigonial width (distance from gonion to gonion).

ESR (eye separation ratio): 0.45-0.47
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the the bizygomatic width (distance from cheekbone to cheekbone). the "third eyeball method" - a theory in which the distance between your eyes should be another eye apart - is widely accepted in determining whether or not your eyes are an appropriate distance away from eachother, however this is flawed and incorrect. here is a thread explaining why, along with some more useful information about this measurement.

EME (eye mouth eye) angle: 47°-50°
measured by calculating the angle formed upon setting the vertex at the center of the lips with the arms crossing the eye pupils. the EME angle is a good indicator of masculinity and symmetry. here is a thread with more information about this measurement.

cervicomental angle: 105°-120°
measured by calculating the angle formed upon setting the vertex at the hyoid with the arms set along the bottom of the chin and the neck. anything above 120° is said to give the impression of a double chin.

gonial angle: 115°-130°
measured by calculating the angle formed upon setting the vertex at the gonion with the arms set along the mandible and the ramus.


canthal tilt: 4°-6°
measured by calculating the angle formed upon setting the vertex at the medial canthus with the arms set parallel to the floor and the lateral canthus.

palpebral fissure length to height ratio: 3.0-3.5
measured by dividing the palpebral fissure length (distance between the medial to the lateral canthus) by the height of the upper and lower eyelid.

forehead height: 3 fingers
measured by clenching your fingers together and seeing how many you can fit on your forehead horizontally before reaching your hairline.

facial thirds: 1/3 of face length
the upper third (height between the hairline to the middle part of the eyebrows), middle third (height between the middle part of the eyebrows to the bottom of the nose) and lower third (height between the bottom of the nose to bottom of the chin) of the face should be approximately 1/3rd of your entire face length (height between the hairline to bottom of the chin). these facial thirds should all be approximately equal to eachother and dividable smoothly into 3 parts as you transition down the face.


facial fifths: 1/5 of ear to ear width
the nose width, palpebral fissure length and length between the lateral canthus to the ear should be approximately 1/5th of the width between your ears. these facial fifths should all be approximately equal to eachother and dividable smoothly into 5 parts as you transition from left to right of the face.
 
Last edited by a moderator:
Averagecel

Averagecel

Zephir
Joined
Oct 24, 2019
Posts
2,358
Reputation
2,553
Time online
78d 8h 18m
SexuallyAbusive said:
facial width to height ratio (FWHR): 1.8+
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the height of the middle part of the eyebrow to the upper lip.
I thought it was bizygomatic width divided by the height of the bottom part of the eyebrow to the upper lip
 
Mexicancel

Mexicancel

Sadness is rebellion
Joined
Jun 23, 2019
Posts
669
Reputation
516
Time online
5d 2h 43m
Symmetry


My face ratios

fwhr= 1.90
midFace ratio= 1.07
Pietrosiek said:
i won't even measure my ratios, it would be pure suifuel
Of course because you are a deformed subhuman kys asap lmao
 
Last edited:
SexuallyAbusive

SexuallyAbusive

$$$ HGH ABU$ER $$$
Joined
Jun 21, 2019
Posts
1,578
Reputation
4,162
Time online
35d 7h 30m
x30001 said:
Great thread. Facial fifths too. Horizontal
edited and added this in. i was going to list this originally but it wouldnt let me since i surpassed the image limit. doesnt check twice when you edit though, so ez bypass
 
Kade

Kade

Arcanologist
Joined
Aug 24, 2018
Posts
1,739
Reputation
3,642
Time online
81d 2h 38m
PrettyBoyMaxxing said:
and you still can’t attract prime women

facial proportions= bullshit in many cases. PHENO MATTERS.
Legit. My facial proportions are definitely fucked up by psl standards and a girl came up to me in the hallway last week and asked for my number dead srs
 
EckhartTollemaxx

EckhartTollemaxx

6'3 copexerciser
Joined
Oct 8, 2019
Posts
2,968
Reputation
3,668
Time online
49d 1h 38m
Kade said:
Legit. My facial proportions are definitely fucked up by psl standards and a girl came up to me in the hallway last week and asked for my number dead srs
What's your pheno?
 
Chintuck22

Chintuck22

Plushy Yoshi 🐸
Joined
May 16, 2019
Posts
7,909
Reputation
20,359
Time online
148d 9h 19m
SexuallyAbusive said:
this is an updated version of my previous ideal facial ratios & proportions thread which can be found here

facial width to height ratio (FWHR): 1.8+
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the height of the middle part of the eyebrow to the upper lip.

lower/full face ratio: 0.62+
measured by dividing the height between the nasion to the bottom of the chin by the face height (distance from hairline to bottom of the chin)

midface ratio: 0.9-1.1
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the height of the nasion to the upper lip. the closer to 1:1 this is, the better.

mouth to nose ratio: 1.5-1.62
measured by dividing the width of the mouth by the width of the nose.

lower to upper lip ratio: 1.62
measured by dividing the height of the lower lip to the upper lip.

chin to philtrum ratio: 2.0-2.25
measured by dividing the height of the middle part of the lips to the bottom of the chin by the height of the bottom of the nose to the middle part of the lips.

bizygomatic to bigonial width: 1.35
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the bigonial width (distance from gonion to gonion).

ESR (eye separation ratio): 0.45-0.47
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the the bizygomatic width (distance from cheekbone to cheekbone). the "third eyeball method" - a theory in which the distance between your eyes should be another eye apart - is widely accepted in determining whether or not your eyes are an appropriate distance away from eachother, however this is flawed and incorrect. here is a thread explaining why, along with some more useful information about this measurement.

EME (eye mouth eye) angle: 47°-50°
measured by calculating the angle formed upon setting the vertex at the center of the lips with the arms crossing the eye pupils. the EME angle is a good indicator of masculinity and symmetry. here is a thread with more information about this measurement.

cervicomental angle: 105°-120°
measured by calculating the angle formed upon setting the vertex at the hyoid with the arms set along the bottom of the chin and the neck. anything above 120° is said to give the impression of a double chin.

gonial angle: 115°-130°
measured by calculating the angle formed upon setting the vertex at the gonion with the arms set along the mandible and the ramus.

canthal tilt: 4°-6°
measured by calculating the angle formed upon setting the vertex at the medial canthus with the arms set parallel to the floor and the lateral canthus.

palpebral fissure length to height ratio: 3.0-3.5
measured by dividing the palpebral fissure length (distance between the medial to the lateral canthus) by the height of the upper and lower eyelid.

forehead height: 3 fingers
measured by clenching your fingers together and seeing how many you can fit on your forehead horizontally before reaching your hairline.

facial thirds: 1/3 of face length
the upper third (height between the hairline to the middle part of the eyebrows), middle third (height between the middle part of the eyebrows to the bottom of the nose) and lower third (height between the bottom of the nose to bottom of the chin) of the face should be approximately 1/3rd of your entire face length (height between the hairline to bottom of the chin). these facial thirds should all be approximately equal to eachother and dividable smoothly into 3 parts as you transition down the face.

facial fifths: 1/5 of ear to ear width
the nose width, palpebral fissure length and length between the lateral canthus to the ear should be approximately 1/5th of the width between your ears. these facial fifths should all be approximately equal to eachother and dividable smoothly into 5 parts as you transition from left to right of the face.
Laughs if you have all these, and yet still don't have a gf 😂😂😅😖😭
 
G

Gunna

Erudite
Joined
Oct 23, 2019
Posts
1,075
Reputation
1,134
Time online
44d 21h 18m
legit post, but idk about the bizygomatic to bigonial ratio. Having a 15 cm bizygo and 11 cm bigonion doesn't seem proportional.
 
Soulrack

Soulrack

Shitposter banterist
Joined
Nov 17, 2019
Posts
727
Reputation
1,417
Time online
12d 10h 46m
i think the lower/full face ratio examples are incorrect. were these measured in inches btw?
 
Fuk

Fuk

The Tribe 😳
Joined
Nov 16, 2019
Posts
8,786
Reputation
13,078
Time online
42d 21h 24m
Make ratio to ratio ratios now
 
ht-normie-ascending

ht-normie-ascending

Zephir
Joined
Jan 4, 2020
Posts
2,383
Reputation
4,377
Time online
60d 18h 46m
tfw your bottom part of body fucks you, (mouth n chin) lip ratio fucked, mouth to nose fucked, chin small,

still got that .98-1.02 midface to carry the sym
 
Deleted member 4973

Deleted member 4973

If you read this its over
Joined
Jan 28, 2020
Posts
994
Reputation
838
Time online
22d 22h 12m
SexuallyAbusive said:
this is an updated version of my previous ideal facial ratios & proportions thread which can be found here

facial width to height ratio (FWHR): 1.8+
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the height of the middle part of the eyebrow to the upper lip.

lower/full face ratio: 0.62+
measured by dividing the height between the nasion to the bottom of the chin by the face height (distance from hairline to bottom of the chin)

midface ratio: 0.9-1.1
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the height of the nasion to the upper lip. the closer to 1:1 this is, the better.

mouth to nose ratio: 1.5-1.62
measured by dividing the width of the mouth by the width of the nose.

lower to upper lip ratio: 1.62
measured by dividing the height of the lower lip to the upper lip.

chin to philtrum ratio: 2.0-2.25
measured by dividing the height of the middle part of the lips to the bottom of the chin by the height of the bottom of the nose to the middle part of the lips.

bizygomatic to bigonial width: 1.35
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the bigonial width (distance from gonion to gonion).

ESR (eye separation ratio): 0.45-0.47
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the the bizygomatic width (distance from cheekbone to cheekbone). the "third eyeball method" - a theory in which the distance between your eyes should be another eye apart - is widely accepted in determining whether or not your eyes are an appropriate distance away from eachother, however this is flawed and incorrect. here is a thread explaining why, along with some more useful information about this measurement.

EME (eye mouth eye) angle: 47°-50°
measured by calculating the angle formed upon setting the vertex at the center of the lips with the arms crossing the eye pupils. the EME angle is a good indicator of masculinity and symmetry. here is a thread with more information about this measurement.

cervicomental angle: 105°-120°
measured by calculating the angle formed upon setting the vertex at the hyoid with the arms set along the bottom of the chin and the neck. anything above 120° is said to give the impression of a double chin.

gonial angle: 115°-130°
measured by calculating the angle formed upon setting the vertex at the gonion with the arms set along the mandible and the ramus.

canthal tilt: 4°-6°
measured by calculating the angle formed upon setting the vertex at the medial canthus with the arms set parallel to the floor and the lateral canthus.

palpebral fissure length to height ratio: 3.0-3.5
measured by dividing the palpebral fissure length (distance between the medial to the lateral canthus) by the height of the upper and lower eyelid.

forehead height: 3 fingers
measured by clenching your fingers together and seeing how many you can fit on your forehead horizontally before reaching your hairline.

facial thirds: 1/3 of face length
the upper third (height between the hairline to the middle part of the eyebrows), middle third (height between the middle part of the eyebrows to the bottom of the nose) and lower third (height between the bottom of the nose to bottom of the chin) of the face should be approximately 1/3rd of your entire face length (height between the hairline to bottom of the chin). these facial thirds should all be approximately equal to eachother and dividable smoothly into 3 parts as you transition down the face.

facial fifths: 1/5 of ear to ear width
the nose width, palpebral fissure length and length between the lateral canthus to the ear should be approximately 1/5th of the width between your ears. these facial fifths should all be approximately equal to eachother and dividable smoothly into 5 parts as you transition from left to right of the face.
Hahha
Fwr 1,92
Lower/full face ratio 0,63
Midface ratio 1,05
Mouth to nose ratio 1,45(but i have tense ld lips)
Upper to lower lip, have tensed lips cant be accurate
Philtrrum to chin ratio 2,4
Bizygomatic to begonia 1,23
Esr 0,473
Facial thirds almost efect, uper and middle are same, lower îs longer
Fifth PARTS perfect

Cant calculate Angeles.


This is pic i used. Printscreened from video 2-3 metters away. Calculate some Angeles for me if you want too tho.
 

Attachments

  • IMG_20200203_221526.jpg
    IMG_20200203_221526.jpg
    9.8 KB · Views: 807
PubertyMaxxer

PubertyMaxxer

Aspiring craniomaxillofacial surgeon
Joined
Oct 15, 2019
Posts
9,876
Reputation
12,751
Time online
112d 6h 45m
WhiteSnake said:
Hahha
Fwr 1,92
Lower/full face ratio 0,63
Midface ratio 1,05
Mouth to nose ratio 1,45(but i have tense ld lips)
Upper to lower lip, have tensed lips cant be accurate
Philtrrum to chin ratio 2,4
Bizygomatic to begonia 1,23
Esr 0,473
Facial thirds almost efect, uper and middle are same, lower îs longer
Fifth PARTS perfect

Cant calculate Angeles.


This is pic i used. Printscreened from video 2-3 metters away. Calculate some Angeles for me if you want too tho.
Youre pretty gl
 
StuffedFrog

StuffedFrog

Zephir
Joined
Jul 25, 2019
Posts
2,202
Reputation
1,831
Time online
76d 2h 0m
SexuallyAbusive said:
this is an updated version of my previous ideal facial ratios & proportions thread which can be found here

facial width to height ratio (FWHR): 1.8+
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the height of the middle part of the eyebrow to the upper lip.

lower/full face ratio: 0.62+
measured by dividing the height between the nasion to the bottom of the chin by the face height (distance from hairline to bottom of the chin)

midface ratio: 1.0-1.1
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the height of the nasion to the upper lip. the closer to 1:1 this is, the better.

mouth to nose ratio: 1.5-1.62
measured by dividing the width of the mouth by the width of the nose.

lower to upper lip ratio: 1.62
measured by dividing the height of the lower lip to the upper lip.

chin to philtrum ratio: 2.0-2.25
measured by dividing the height of the middle part of the lips to the bottom of the chin by the height of the bottom of the nose to the middle part of the lips.

bizygomatic to bigonial width: 1.35
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the bigonial width (distance from gonion to gonion).

ESR (eye separation ratio): 0.45-0.47
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the the bizygomatic width (distance from cheekbone to cheekbone). the "third eyeball method" - a theory in which the distance between your eyes should be another eye apart - is widely accepted in determining whether or not your eyes are an appropriate distance away from eachother, however this is flawed and incorrect. here is a thread explaining why, along with some more useful information about this measurement.

EME (eye mouth eye) angle: 47°-50°
measured by calculating the angle formed upon setting the vertex at the center of the lips with the arms crossing the eye pupils. the EME angle is a good indicator of masculinity and symmetry. here is a thread with more information about this measurement.

cervicomental angle: 105°-120°
measured by calculating the angle formed upon setting the vertex at the hyoid with the arms set along the bottom of the chin and the neck. anything above 120° is said to give the impression of a double chin.

gonial angle: 115°-130°
measured by calculating the angle formed upon setting the vertex at the gonion with the arms set along the mandible and the ramus.

canthal tilt: 4°-6°
measured by calculating the angle formed upon setting the vertex at the medial canthus with the arms set parallel to the floor and the lateral canthus.

palpebral fissure length to height ratio: 3.0-3.5
measured by dividing the palpebral fissure length (distance between the medial to the lateral canthus) by the height of the upper and lower eyelid.

forehead height: 3 fingers
measured by clenching your fingers together and seeing how many you can fit on your forehead horizontally before reaching your hairline.

facial thirds: 1/3 of face length
the upper third (height between the hairline to the middle part of the eyebrows), middle third (height between the middle part of the eyebrows to the bottom of the nose) and lower third (height between the bottom of the nose to bottom of the chin) of the face should be approximately 1/3rd of your entire face length (height between the hairline to bottom of the chin). these facial thirds should all be approximately equal to eachother and dividable smoothly into 3 parts as you transition down the face.

facial fifths: 1/5 of ear to ear width
the nose width, palpebral fissure length and length between the lateral canthus to the ear should be approximately 1/5th of the width between your ears. these facial fifths should all be approximately equal to eachother and dividable smoothly into 5 parts as you transition from left to right of the face.
yoo can you take my measurements so I know what to improve on
 
Got the hunter eyes

Got the hunter eyes

Side-profilecel
Joined
Feb 27, 2020
Posts
954
Reputation
1,483
Time online
11d 7h 45m
High iq post as the other, i still have it opened in an other page
 
Esteban1997

Esteban1997

Neutral
Joined
Dec 26, 2018
Posts
3,213
Reputation
2,605
Time online
26d 23h 25m
I heard esteban1997 has the best face
 
Andros

Andros

Zephir
Joined
Jan 14, 2020
Posts
3,535
Reputation
5,791
Time online
52d 7h 33m
Measured it on my ID pic

FHWR: 1.77
Lower full face ratio: 0.63
Midface ratio: 0.98
Mouth to nose ratio: 1.52
Lower to upper lips ratio: 0.92 (lol)
Chin to philtrum ratio: 2.24
Bizygo to bigo: 1.12
ESR: 0.46
Palpebral fissure...: 3
Forehead: 4 fingers
 
SteveRogers

SteveRogers

Eren Yeager x Reiner Braun
Joined
Dec 2, 2019
Posts
2,005
Reputation
2,190
Time online
26d 11h 14m
SexuallyAbusive said:
gonial angle: 115°-130°
measured by calculating the angle formed upon setting the vertex at the gonion with the arms set along the mandible and the ramus.
Sorry to disagree, as I am, of course, a greycel, but I think the ideal gonial angle for a male is 100-115 degrees, I'm right on 113-115 and I believe that this is ideal, but anything above 120ish looks horrible.
 
Deleted member 3202

Deleted member 3202

Motivatemaxxing
Joined
Sep 17, 2019
Posts
4,865
Reputation
4,296
Time online
64d 14h 45m
SteveRogers said:
Sorry to disagree, as I am, of course, a greycel, but I think the ideal gonial angle for a male is 100-115 degrees, I'm right on 113-115 and I believe that this is ideal, but anything above 120ish looks horrible.
I think Johnny Depp has one in the 120's and it looked good (in his youth it did). The lower the gonial angle, the more it just looks like a block without much shape.
 
Deleted member 3043

Deleted member 3043

Life is about hapiness and i love you all.
Joined
Sep 3, 2019
Posts
36,684
Reputation
48,036
Time online
129d 16h 6m
WhiteSnake said:
Hahha
Fwr 1,92
Lower/full face ratio 0,63
Midface ratio 1,05
Mouth to nose ratio 1,45(but i have tense ld lips)
Upper to lower lip, have tensed lips cant be accurate
Philtrrum to chin ratio 2,4
Bizygomatic to begonia 1,23
Esr 0,473
Facial thirds almost efect, uper and middle are same, lower îs longer
Fifth PARTS perfect

Cant calculate Angeles.


This is pic i used. Printscreened from video 2-3 metters away. Calculate some Angeles for me if you want too tho.
chad i wish i was that gl
 
SteveRogers

SteveRogers

Eren Yeager x Reiner Braun
Joined
Dec 2, 2019
Posts
2,005
Reputation
2,190
Time online
26d 11h 14m
AleksVs said:
I think Johnny Depp has one in the 120's and it looked good (in his youth it did). The lower the gonial angle, the more it just looks like a block without much shape.
True, but I've never seen a good jaw on a guy with 130 degrees +. Look at Christian Bale, literally ruins his lower third.
 
Deleted member 3202

Deleted member 3202

Motivatemaxxing
Joined
Sep 17, 2019
Posts
4,865
Reputation
4,296
Time online
64d 14h 45m
SteveRogers said:
True, but I've never seen a good jaw on a guy with 130 degrees +. Look at Christian Bale, literally ruins his lower third.
I believe a 130 degrees gonial angle is reserved for prettyboys, although you don't want to go below 115 either, otherwise it starts to get too blockish.
 
C

Chad1212

med pheno + perm = frauding lightskin
Joined
Nov 28, 2019
Posts
20,106
Reputation
31,985
Time online
204d 4h 49m
SexuallyAbusive said:
this is an updated version of my previous ideal facial ratios & proportions thread which can be found here

facial width to height ratio (FWHR): 1.8+
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the height of the middle part of the eyebrow to the upper lip.

lower/full face ratio: 0.62+
measured by dividing the height between the nasion to the bottom of the chin by the face height (distance from hairline to bottom of the chin)

midface ratio: 1.0-1.1
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the height of the nasion to the upper lip. the closer to 1:1 this is, the better.

mouth to nose ratio: 1.5-1.62
measured by dividing the width of the mouth by the width of the nose.

lower to upper lip ratio: 1.62
measured by dividing the height of the lower lip to the upper lip.

chin to philtrum ratio: 2.0-2.25
measured by dividing the height of the middle part of the lips to the bottom of the chin by the height of the bottom of the nose to the middle part of the lips.

bizygomatic to bigonial width: 1.35
measured by dividing the bizygomatic width (distance from cheekbone to cheekbone) by the bigonial width (distance from gonion to gonion).

ESR (eye separation ratio): 0.45-0.47
measured by dividing the interpupillary distance (distance between the centers of the pupils) by the the bizygomatic width (distance from cheekbone to cheekbone). the "third eyeball method" - a theory in which the distance between your eyes should be another eye apart - is widely accepted in determining whether or not your eyes are an appropriate distance away from eachother, however this is flawed and incorrect. here is a thread explaining why, along with some more useful information about this measurement.

EME (eye mouth eye) angle: 47°-50°
measured by calculating the angle formed upon setting the vertex at the center of the lips with the arms crossing the eye pupils. the EME angle is a good indicator of masculinity and symmetry. here is a thread with more information about this measurement.

cervicomental angle: 105°-120°
measured by calculating the angle formed upon setting the vertex at the hyoid with the arms set along the bottom of the chin and the neck. anything above 120° is said to give the impression of a double chin.

gonial angle: 115°-130°
measured by calculating the angle formed upon setting the vertex at the gonion with the arms set along the mandible and the ramus.

canthal tilt: 4°-6°
measured by calculating the angle formed upon setting the vertex at the medial canthus with the arms set parallel to the floor and the lateral canthus.

palpebral fissure length to height ratio: 3.0-3.5
measured by dividing the palpebral fissure length (distance between the medial to the lateral canthus) by the height of the upper and lower eyelid.

forehead height: 3 fingers
measured by clenching your fingers together and seeing how many you can fit on your forehead horizontally before reaching your hairline.

facial thirds: 1/3 of face length
the upper third (height between the hairline to the middle part of the eyebrows), middle third (height between the middle part of the eyebrows to the bottom of the nose) and lower third (height between the bottom of the nose to bottom of the chin) of the face should be approximately 1/3rd of your entire face length (height between the hairline to bottom of the chin). these facial thirds should all be approximately equal to eachother and dividable smoothly into 3 parts as you transition down the face.

facial fifths: 1/5 of ear to ear width
the nose width, palpebral fissure length and length between the lateral canthus to the ear should be approximately 1/5th of the width between your ears. these facial fifths should all be approximately equal to eachother and dividable smoothly into 5 parts as you transition from left to right of the face.
Turns out most of my ratios are good......my only problem

My forehead
 
Last edited:
Zyros

Zyros

Zephir
Joined
Oct 26, 2018
Posts
3,363
Reputation
5,816
Time online
103d 10h 7m
FWHR: 1.88

Lower/Fullface ratio: 0.67

Midface ratio: 1.05

Mouth to nose: 1.59

Lower to upper lip: 1.5

Chin to philtrum: 1.8

Bizygo to bigonial: 1.02

ESR: 0.49

EME angle: 49º

Cerviconmental angle: 104º

Gonial angle: 121º

Canthal tilt: 5.7º

Palpebral fissure length to height: 3.35

Forehead height: 3.2 (fingers)

Facial thirds: 0.35 (low), 0.3 (mid), 0.33 (top) (rounded from 5 digit decimals, taking into account 1 as the whole face)

Facial fifths: 0.2 (all fifths, rounded from 5 digit decimals, taking into account 1 as the whole)


Measured with those three pics, with low to no camera distortion (third pic has bit of distortion since its front cam but used only for canthal tilt and fissure width to height)
 
Last edited:

Users who are viewing this thread

  • Top