TsarTsar444
Asexual peaceful balkan monk
- Joined
- May 5, 2019
- Posts
- 41,541
- Reputation
- 105,466
Making GHB, “Liquid E” GHB or sometimes called Liquid E or Liquid G. Is popular at raves and parties because many users compare it’s effects of that of ecstasy.
Chemicals needed:
1. GBL, gamma-Butyrolactone. (Used almost exclusively as a chemical intermediate as well as in the production of pesticides and herbicides. Also GBL can be used as an intermediate in the production of vitamins and pharmaceuticals.) *You can find this at http://www.geocities.com/specialtywood_products. They sell 1000ml bottles of GBL for only 65 dollars. They sell GBL as a paint stripper for antique wooden furniture. Just look on the internet.
2. NaOH, sodium hydroxide or lye. You can find this in the drain cleaning section at most stores. Recommened ‘Red Devel Lye’.
*2. KOH, potassium Hydroxide. You can use this or NaOH, but you will need more KOH then NaOH.
3. pH testing papers, found everwhere ask a clerk or someone at a big store.
How to make GHB:
You will need :
1. 135 grams (120 ml)of gamma butyrolactone
2. 63 grams of Sodium Hydroxide or 91 grams of Potassium Hydroxide
3. Papers to test pH
1. Place the content of the gamma butyrolactone bottle in a stainless steel or pyrex glass saucepan. Do not use aluminum cookware to make GHB.
2. Place the content of the NaOH or KOH bottle in the same saucepan.
3. Put SLOWLY around a half cup of warm distilled water in it. Put a cover (fast! the reaction may be immediate) on it but not tight.
4. Wait a little it will start reacting on itself. If it doesn’t (after 2-3 minutes), heat it a LITTLE (once it reacts remove it from the stove).
4.5 If there is some NaOH not dissolved, stir it up till it is.
5. (This step is optional, some like it like that and others prefer to heat the solution a little.) After it’s finished. Start heating it slowly. You will see it starting boiling. Don’t overheat! It can burn. Do it for one hour. Don’t forget to add water if you make it boil for a long time.
5.5. Between step 4 and 6 you might see a white compound on the side of the saucepan (it doesn’t happen everytime). Don’t throw it away, it’s GHB. When you will add water, it will dissolve.
6. When you are finished, put it in a measuring cup (Pyrex) and fill it with water (when I’m in a hurry to taste it I use ice) to 1000ml (a little more than 4 cups). That way you’ll have around 1 grams per teaspoon.
7. Measure the PH. If it’s higher than 7.5 add vinegar to lower it to below 7.5 It can take 50 - 75 ml of vinegar.
9. To store it use a mason glass jar with a plastic cover. Place it in the fridge, the taste is better when it’s cold.
Chemicals needed:
1. GBL, gamma-Butyrolactone. (Used almost exclusively as a chemical intermediate as well as in the production of pesticides and herbicides. Also GBL can be used as an intermediate in the production of vitamins and pharmaceuticals.) *You can find this at http://www.geocities.com/specialtywood_products. They sell 1000ml bottles of GBL for only 65 dollars. They sell GBL as a paint stripper for antique wooden furniture. Just look on the internet.
2. NaOH, sodium hydroxide or lye. You can find this in the drain cleaning section at most stores. Recommened ‘Red Devel Lye’.
*2. KOH, potassium Hydroxide. You can use this or NaOH, but you will need more KOH then NaOH.
3. pH testing papers, found everwhere ask a clerk or someone at a big store.
How to make GHB:
You will need :
1. 135 grams (120 ml)of gamma butyrolactone
2. 63 grams of Sodium Hydroxide or 91 grams of Potassium Hydroxide
3. Papers to test pH
1. Place the content of the gamma butyrolactone bottle in a stainless steel or pyrex glass saucepan. Do not use aluminum cookware to make GHB.
2. Place the content of the NaOH or KOH bottle in the same saucepan.
3. Put SLOWLY around a half cup of warm distilled water in it. Put a cover (fast! the reaction may be immediate) on it but not tight.
4. Wait a little it will start reacting on itself. If it doesn’t (after 2-3 minutes), heat it a LITTLE (once it reacts remove it from the stove).
4.5 If there is some NaOH not dissolved, stir it up till it is.
5. (This step is optional, some like it like that and others prefer to heat the solution a little.) After it’s finished. Start heating it slowly. You will see it starting boiling. Don’t overheat! It can burn. Do it for one hour. Don’t forget to add water if you make it boil for a long time.
5.5. Between step 4 and 6 you might see a white compound on the side of the saucepan (it doesn’t happen everytime). Don’t throw it away, it’s GHB. When you will add water, it will dissolve.
6. When you are finished, put it in a measuring cup (Pyrex) and fill it with water (when I’m in a hurry to taste it I use ice) to 1000ml (a little more than 4 cups). That way you’ll have around 1 grams per teaspoon.
7. Measure the PH. If it’s higher than 7.5 add vinegar to lower it to below 7.5 It can take 50 - 75 ml of vinegar.
9. To store it use a mason glass jar with a plastic cover. Place it in the fridge, the taste is better when it’s cold.