Mouth Widening Appliances

Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege
how do i know which one to use ?
 
  • +1
Reactions: to_stop_da_cope
you put it in your mouth

Stare 1


so i get all of them made and then check ?
 
  • JFL
  • +1
Reactions: Looks234 and to_stop_da_cope
how do i know which one to use ?
Idk. Mouth elasticity probably varies between people no matter mouth width. I recommend just starting out with the 9cm one.
 
  • +1
Reactions: zaynbrah
Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege
Palate widening or lip? I have a wide palate and am expanidn w mse to high 40s to 50mm imw, but narrow lips.
 
Does someone now a 3d printing service in germany and what its cost is
 
  • +1
Reactions: Mouthbreath
i need mouth widening more than water but im high inhib about nasal folds tbh

 
  • +1
Reactions: IWantToMax, Deleted member 9670 and Deleted member 9699
i need mouth widening more than water but im high inhib about nasal folds tbh
yea thats what i came here to ask tbh
nasolabial folds are a looksmin
 
yea thats what i came here to ask tbh
nasolabial folds are a looksmin
i can't afford to get those small mouth isn't ideal but it's not a failo like having old person homer simpson lips

Homer simpson gif 1547466477


 
  • +1
Reactions: Deleted member 9699
i need mouth widening more than water but im high inhib about nasal folds tbh
Fix your jaws first tbh
your mouth is narrow but pretty proportional to your face, I think you’re at a much greater risk of getting folds while recessed and bloated
 
Fix your jaws first tbh
your mouth is narrow but pretty proportional to your face, I think you’re at a much greater risk of getting folds while recessed and bloated
How the fuck am I supposed to fix my jaw? Download bimax.exe? Not as easy as it sounds.
 
  • JFL
  • +1
Reactions: IWantToMax, MissLexotan6MG, wateriswet and 5 others
How the fuck am I supposed to fix my jaw? Download bimax.exe? Not as easy as it sounds.
Yeah jfl ik just saying I don’t think your mouth is much of an issue rn but would be with better jaw
maybe you feel differently though
 
Been using the 9cm one for a couple days and JFL this shit actually works. Good design OP. But my lips are chapped as fuck, does this go away eventually? I use cotton on the corners of my mouth and I legit can't feel it in my mouth

Also the 12cm one surprised me, I have a 5.5cm mouth naturally and that shit is HUGE, I don't think I will ever fit that in my mouth
 
  • +1
Reactions: animo123 and RecessedPrettyboy
Been using the 9cm one for a couple days and JFL this shit actually works. Good design OP. But my lips are chapped as fuck, does this go away eventually? I use cotton on the corners of my mouth and I legit can't feel it in my mouth

Also the 12cm one surprised me, I have a 5.5cm mouth naturally and that shit is HUGE, I don't think I will ever fit that in my mouth
Yea In the beggining your lips will get chapped. It will go away eventually.
Do you mean the 11cm one? Cuz there is no 12cm anymore
 
Yea In the beggining your lips will get chapped. It will go away eventually.
Do you mean the 11cm one? Cuz there is no 12cm anymore
oh yeah just measured its 11cm
difference of 2cm is huge, do you think I could work up to 11cm with the 9cm one eventually?

also what gains can I expect overtime? I currently got a couple mm but need about 0.9cm to reach the golden ratio mouth to nose ratio
 
oh yeah just measured its 11cm
difference of 2cm is huge, do you think I could work up to 11cm with the 9cm one eventually?

also what gains can I expect overtime? I currently got a couple mm but need about 0.9cm to reach the golden ratio mouth to nose ratio
Yea prob. How wide is the 11cm appliance in total? Like 13cm?

Idk its prob different for each person and I just started using them again
 
  • +1
Reactions: animo123 and Deleted member 7076
Yea prob. How wide is the 11cm appliance in total? Like 13cm?

Idk its prob different for each person and I just started using them again
its like 12.5cm in total
its way bigger than the 9cm one for my mouth though
 
Best mouth widening appliance @hairyballscel
Unknown 4
 
  • JFL
  • +1
Reactions: JizzFarmer and hairyballscel
its like 12.5cm in total
its way bigger than the 9cm one for my mouth though
Yea u should be able to fit it soon. I can fit that. And my mouth is smaller than urs.
 
@16tyo
can you send me pics of the appliance please? especially the edges that sit on the mouth
 
@16tyo
can you send me pics of the appliance please? especially the edges that sit on the mouth
have you ever tried using it while you were asleep or is that simply too uncomfortable
 
  • +1
Reactions: Deleted member 9670
Just ordered the 9cm one, how long would it take to add 0.5cm to my mouth and how long per day would I have to wear it?
 
  • +1
Reactions: animo123 and Deleted member 9670
Just ordered the 9cm one, how long would it take to add 0.5cm to my mouth and how long per day would I have to wear it?
Nobody knows yet
 
  • +1
Reactions: JizzFarmer
Just ordered the 9cm one, how long would it take to add 0.5cm to my mouth and how long per day would I have to wear it?
try and wear it while sleeping
if that doesnt bring results in a couple months then i dunno
 
  • +1
Reactions: JizzFarmer
Hey op when will you have the other sizes available
Idk. Mouth elasticity probably varies between people no matter mouth width. I recommend just starting out with the 9cm one.
 
Hey op when will you have the other sizes available
8,9 and 11cm are available.

In the future I will update the 7, 10 and 12cm. The decimal ones (.5) wont be available anymore.
 
8,9 and 11cm are available.

In the future I will update the 7, 10 and 12cm. The decimal ones (.5) wont be available anymore.
bummer okay looking forward to size 10 purchased 9 and 11 will get 8 asap and 10 once it is available
 
any reviews so far on the devices?
 
i still cant fit 11cm JFL
 
  • +1
Reactions: animo123
any reviews so far on the devices?
it works with no nasolabial folds as of a couple months of using 9cm on my originally 5.5cm mouth which now is 6cm
 
  • +1
  • Love it
Reactions: IWantToMax, GigaAscender, animo123 and 2 others
it works with no nasolabial folds as of a couple months of using 9cm on my originally 5.5cm mouth which now is 6cm
did your mouth get wider or is it too early to say
 
try and wear it while sleeping
if that doesnt bring results in a couple months then i dunno
It’s too hard to wear whilst sleeping, can’t fall asleep with it in.
it works with no nasolabial folds as of a couple months of using 9cm on my originally 5.5cm mouth which now is 6cm
How long per day are you wearing it?
 
  • +1
Reactions: animo123
It’s too hard to wear whilst sleeping, can’t fall asleep with it in.

How long per day are you wearing it?
wear a smaller one while sleeping
 
  • +1
Reactions: JizzFarmer
Mouth Widening Appliance 3d models for 3d printing

Now before someone asks
How do I print it if I dont have a 3d printer? Just go to a 3d printing service store and print it. simple and shoudnt be expensive at all

Here are the different sizes:

7cm: https://www.tinkercad.com/things/2ZfCaY9upiy
7.5cm: https://www.tinkercad.com/things/bIiUsvUUbm9

8cm

8.5cm

9cm: https://www.tinkercad.com/things/eTx7tz1DL5E

9.5cm: https://www.tinkercad.com/things/abZzaifuWgO

10cm: https://www.tinkercad.com/things/lAZuXrnm0fN

11cm: https://www.tinkercad.com/things/crHqEkeqpL5

12cm: https://www.tinkercad.com/things/894F9bpN4TV

Youll need to create an account in TinkerCad then just export the file as .stl format


View attachment 379776
@Notuglyjustpoor
@streege
When will you have the 10 cm one op just finished progression from 8 cm to 9
 
I just got mine and when I put it in it makes my cheeks around the corner of my mouth puff out, will this cause sagging or anything like that?
 
my mouth is not wide at all and i look 10x better when i stretch my lips, i would get this im just not autistic enough to actually buy it :feelswhy:
 
my mouth is not wide at all and i look 10x better when i stretch my lips, i would get this im just not autistic enough to actually buy it :feelswhy:
Fucking volcel gtfo this site and rope if you’re too high inhib to place plastic to widen your mouth fuck you
 
  • +1
  • JFL
Reactions: jflsnowdzz, randomvanish, 5'8manlet and 2 others

Similar threads

RecessedPrettyboy
Replies
13
Views
2K
Phillybeard1996
P

Users who are viewing this thread

Back
Top